Netzerotools FLIR M-SERIES Bedienungsanleitung

M-Series

432-0003-00-10

Revision 150

January 2012 Operator’s Manual

www.netzerotools.com

Flir M-324L M 324 L Thermal Night Vision Infrared Camera Maritime

Flir M-324XP M 324 XP Thermal Night Vision Infrared Camera Maritime

Flir M-612L M 612 L Thermal Night Vision Infrared Camera Maritime

Flir M-618CS M 618 CS Thermal Night Vision Infrared Camera Maritime

Flir M-625L M 625 L Thermal Night Vision Infrared Camera Maritime

Flir M-625XP M 625 XP Thermal Night Vision Infrared Camera Maritime

______________________________________________________

_________________________________________________________

______________________________________________________

_________________________________________________________

______________________________________________________

_________________________________________________________

photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written

permission of FLIR Systems, Inc.

Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems, Inc.

and/or its subsidiaries. All other trademarks, trade names, or company names referenced herein are used for identification

only and are the property of their respective owners.

This product is covered by one or more of US Patent Nos: 7470904; 7034301; 6812465; 7470902; 6929410 and other

patents pending or design patents pending.

The M-Series thermal imaging system is controlled by US export laws. There are special versions of this system that are

approved for international distribution and travel. Please contact FLIR Systems if you have any questions.

Document Number: 432-0003-00-10, Revision 150

Document History

This document is controlled to FLIR Technology Level 1. The information contained in this document pertains to a dual use

product controlled for export by the Export Administration Regulations (EAR). FLIR trade secrets contained herein are

subject to disclosure restrictions as a matter of law. Diversion contrary to US law is prohibited. US Department of

Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

Revision Date Comment

100 June 2009 Initial release

110 February 2010 Release of M-320L and M-324XP and minor changes

120 March 2010 Minor corrections and clarifications

130 December 2010 Release of M-625XP, M-324L, and M-625L

Replacement of M-320L and M-626L

140 January 2011 Minor corrections

150 January 2012 Release of M-618CS

Minor corrections and style changes

www.netzerotools.com

432-0003-00-10 Rev 150 M-Series Operator’s Manual 1

CHAPTER 1 M-Series Overview ......................................................................5

Additional References .....................................................................................................6

Documentation Conventions ...........................................................................................6

Warnings and Cautions...............................................................................................6

System Description. ....................................................................................................7

M-Series Gimbal Assembly ............................................................................................8

Joystick Control Unit (JCU) .............................................................................................9

Multiple Cameras, JCUs, and Other Devices .................................................................9

Video Display.............................................................................................................10

Thermal Imaging ...........................................................................................................10

Video Screen Icons ....................................................................................................... 11

CHAPTER 2 M-Series Joystick Control Unit ..................................................15

JCU Introduction........................................................................................................15

JCU Buttons..............................................................................................................15

Power/DIM Button .........................................................................................................16

MENU Button ................................................................................................................16

USER Button ................................................................................................................17

SCENE Button ..............................................................................................................17

COLOR Button ..............................................................................................................18

HOME Button ................................................................................................................18

Special Button Functions ..............................................................................................19

Button Summary ...........................................................................................................19

JCU Puck. .................................................................................................................20

Tilting the Camera .........................................................................................................21

Panning the Camera .....................................................................................................21

Zooming the Camera ....................................................................................................21

Freezing an Image ........................................................................................................22

JCU Display...............................................................................................................22

CHAPTER 3 M-Series System Startup ...........................................................23

System Startup and Shutdown..................................................................................23

The Bootup Process..................................................................................................23

Standby Mode. ..........................................................................................................25

Contents

www.netzerotools.com

Contents

2432-0003-00-10 Rev 150 M-Series Operator’s Manual

JCU Power Menu. .....................................................................................................26

Power Menu ..................................................................................................................27

Assign JCU ...................................................................................................................27

JCU Stndby? .................................................................................................................27

Camera Stndby? ...........................................................................................................27

System Stndby? ............................................................................................................27

Global Stndby? ..............................................................................................................28

Calibrate JCU ................................................................................................................28

Cancel ...........................................................................................................................28

Factory Default Settings............................................................................................28

CHAPTER 4 M-Series System Configuration ................................................31

Overview....................................................................................................................31

Main Menu.................................................................................................................32

Video Setup...............................................................................................................33

Set Thermal Color Default ............................................................................................33

Set Video Polarity .........................................................................................................33

Enable (Disable) Color Thermal Video .........................................................................34

Display Test Pattern ......................................................................................................34

Set Symbology...........................................................................................................35

Disable (Enable) PC Icon and JCU Icon .......................................................................35

Display All Icons ............................................................................................................35

Display Minimal Icons ...................................................................................................35

Hide All Icons ................................................................................................................36

User Programmable Button.......................................................................................36

System Setup Menu..................................................................................................37

Enable (Disable) Ball-Down Installation ........................................................................38

Enable (Disable) Aircraft Joystick Mode .......................................................................38

Enable (Disable) Twist-to-Pan Mode ............................................................................38

Enable (Disable) High Power Standby and High Motor Torque ....................................39

Enable (Disable) Rearview Mode .................................................................................40

Set Stow Position ..........................................................................................................40

Name Camera ...............................................................................................................41

Surveillance Mode ........................................................................................................41

About/Help.................................................................................................................43

Video Icon Help Screens ..............................................................................................43

Product Information .......................................................................................................44

Contact FLIR .................................................................................................................44

Restore Factory Defaults ..............................................................................................44

Mechanical Stabilization Feature...............................................................................45

Video Screen Icons with Mechanical Stabilization ........................................................45

Main Menu: Enable Point Mode ....................................................................................46

User Programmable Button: Point Mode ......................................................................48

System Setup Menu ......................................................................................................48

Video Icon Help Screen ................................................................................................49

www.netzerotools.com

432-0003-00-10 Rev 150 M-Series Operator’s Manual 3

Contents

CHAPTER 5 M-Series IP Interface and PC Operations .................................51

M-Series Web Control...............................................................................................51

Web Control Functions..............................................................................................52

Enabling Universal Plug and Play (UPnP). ...............................................................56

UPnP Overview .............................................................................................................56

Enabling the UPnP User Interface ................................................................................56

Network Settings. ......................................................................................................58

Changing the IP Address of the Camera ......................................................................58

Changing the IP Address of the JCU ............................................................................60

Custom Network Applications. ..................................................................................61

Programmers/Integrators ..............................................................................................61

Command Strings .........................................................................................................62

Resources Available .....................................................................................................62

Training .........................................................................................................................62

CHAPTER 6 M-Series Reference Information ...............................................63

Introduction................................................................................................................63

Acronyms. .................................................................................................................63

List of Icons. ..............................................................................................................65

System Specifications. ..............................................................................................67

Feature Comparison of M-Series Models..................................................................68

Troubleshooting Tips.................................................................................................70

On Screen Messages ...................................................................................................72

Restoring the Factory Network Settings .......................................................................73

www.netzerotools.com

Contents

4432-0003-00-10 Rev 150 M-Series Operator’s Manual

This page is intentionally blank.

www.netzerotools.com

432-0003-00-10 Rev 150 M-Series Operator’s Manual 5

CHAPTER 1 M-Series Overview

This manual describes the operation of the M-Series camera. If you need help or

have additional questions, please call to speak with our support experts; see the

phone numbers listed on the back cover of this manual.

This manual includes information about the following topics:

• System description

• Using the joystick control unit (JCU)

• System startup and shutdown

• Configuring your M-Series camera

• Setting up the interface between your camera and a PC

• Helpful reference information such as acronyms, parts lists, and a table of

icons, and a comparison of model features

www.netzerotools.com

M-Series Overview

6432-0003-00-10 Rev 150 — M-Series Operator’s Manual

Warnings and Cautions

Warning: Do not use the M-Series imaging system as the primary navigation

system. Use it in conjunction with other navigation aids and a primary manual

navigation system.

Warning: Use of insufficient wire gauge can result in fire.

Caution: Do not open the M-Series camera unit for any reason. Disassembly of

the camera (including removal of the cover) can cause permanent damage and

will void the warranty.

Caution: Be careful not to leave fingerprints on the M-Series camera optics.

www.netzerotools.com

432-0003-00-10 Rev 150 — M-Series Operator’s Manual 7

M-Series Overview

Caution: The M-Series requires a power supply of 12 – 24V DC nominal, 5 Amp

maximum. Absolute voltage range: 10 – 32V DC. Operating the camera outside of

the specified input voltage range or the specified operating temperature range

can cause permanent damage.

Proper Disposal of Electrical and Electronic Equipment (EEE): The European

Union (EU) has enacted Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE), which aims to prevent EEE waste from arising, to

encourage reuse, recycling, and recovery of EEE waste, and to promote

environmental responsibility.

In accordance with these regulations, all EEE products labeled with the “crossed

out wheeled bin” either on the product itself or in the product literature must not be

disposed of in regular rubbish bins, mixed with regular household or other

commercial waste, or by other regular municipal waste collection means. Instead,

and in order to prevent possible harm to the environment or human health, all

EEE products (including any cables that came with the product) should be

responsibly discarded or recycled.

To identify a responsible disposal method where you live, please contact your

local waste collection or recycling service, your original place of purchase or

product supplier, or the responsible government authority in your area. Business

users should contact their supplier or refer to their purchase contract.

System Description

M-Series is a maritime thermal imaging system for use on most types of vessels.

The system is available in two configurations:

• The single payload models have a single thermal imaging camera.

• The dual payload models are equipped with both a thermal imaging camera

and a visible-light (DLTV) camera, either low-light or color.

The infrared (IR) thermal camera provides night-time imagery, even in total

darkness, based on temperature differences. The thermal camera provides a

clear video image even under completely dark conditions because it is sensitive

to thermal infrared energy. The infrared camera supports either 2X or both 2X and

4X zoom, depending on the model.

On dual payload models, the two integrated DLTV camera options provide either

black and white imagery in low-light conditions or color imagery. The DLTV

cameras provide enhanced navigational abilities in a variety of conditions, for

example, during twilight hours or when operating along intercoastal waterways

and near harbor entrances. The color camera dual payload model supports

continuous zoom.

Thermal Image at Night

www.netzerotools.com

Inhaltsverzeichnis

Andere Netzerotools Wärmebildkamera Handbücher

Netzerotools

Netzerotools FLIR T6 Series Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro HM-TD3117T-1/Q Bedienungsanleitung

optris

optris PI 160 Bedienungsanleitung

Perfect Prime

Perfect Prime IR0001 Bedienungsanleitung

InfraTec

InfraTec InfraTec Bedienungsanleitung

FLIR

FLIR E4 Bedienungsanleitung

FLIR

FLIR T420-NIST Bedienungsanleitung

ICI

ICI 8000 Series Bedienungsanleitung

Hikmicro

Hikmicro BX20 Bedienungsanleitung

ICI

ICI SOUND DETECT Bedienungsanleitung

Perfect Prime

Perfect Prime IR0175 Bedienungsanleitung

HT THT80 Bedienungsanleitung

ICI

ICI TRACE IR 25 Series Bedienungsanleitung

Qvis

Qvis PX-SDH2010 Bedienungsanleitung

WORKSWELL

WORKSWELL GIS 320 Bedienungsanleitung

FLIR

FLIR Navigator II Bedienungsanleitung

InfraTec

InfraTec VarioCAM Bedienungsanleitung

FLIR

FLIR E6-XT Bedienungsanleitung

FLIR

FLIR Scout TS32r Pro Bedienungsanleitung