NEW SUNRISE NGR-3000 Bedienungsanleitung

NGR-3000 OM E. 20170815-02

NGR-3000

GPS NAVIGATOR

(TSO)

USER’S MANUAL

NEW SUNRISE

NGR-3000 USER’S MANUAL

NOTICE TO USERS

-Thanks for your purchasing this product NGR-3000 GPS NAVIGATOR.

-The copyright of this manual is owned by the manufacturer, NEW SUNRISE CO., LTD

(NSR). Prior written permission is required for copying or reproducing the manual or

part of the manual.

-Software version in your product may be some different from that described as in this

manual. Such difference will not affect the performance of the product. NSR reserves

the right of continuous improvement on products both in software and in hardware

without any prior notice.

-NSR will assume no responsibility for the damage caused by improper use or

modification of the product or claims of loss of profit by a third party.

-Please read this manual carefully to ensure proper use before installation and use of the

product.

-Please keep the manual for your future reference.

NGR-3000 USER’S MANUAL

Modify Record

No.

Modify by

Date

Paragraph

Version

Reason

Q/A

2017/06/14

First edition

Q/A

2017/08/15

Add navigation function

NGR-3000 USER’S MANUAL

SAFETY INSTRUCTIONS FOR THE OPERATOR

Warning

Keep away from heat source or direct sunshine.

Prohibition

Don’t open the equipment. Only qualified personnel should

work inside the equipment. Don’t disassemble or try to

modify the equipment.

Dangerous

Turn off the power immediately when smoke or fire is emitted.

SAFETY INSTRUCTIONS FOR THE INSTALLER

Warning

Connect the earthing cord to ship’s body.

Observe the compass safe distance to prevent deviation of

an onboard magnetic compass.

Prohibited

Don’t open the equipment unless you have fully understood

the structure and circuits of the equipment. Only qualified

personnel should work inside the equipment. Don’t

disassemble or try to modify the equipment.

Dangerous

Turn off the power at power distribution board before

installation.

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

TABLE OF CONTENTS

1. PRODUCT FEATURES ...................................................................................................... 1

2. OPERATIONAL OVERVIEW.............................................................................................. 2

2.1 CONTROL DESCRIPTION .............................................................................................................. 2

2.2 TURN ON AND OFF THE POWER.................................................................................................. 4

2.3 ADJUST DIMMER AND CONTRAST .............................................................................................. 4

2.4 DISPLAY MODES............................................................................................................................... 5

2.4.1 Plotter display................................................................................................................5

2.4.2 Highway display............................................................................................................6

2.4.3 Nav data display...........................................................................................................7

2.4.4 Compass display ..........................................................................................................8

2.5 BASIC MENU OPERATION................................................................................................................... 8

2.6 HOW TO ENTER CHARACTER DATA........................................................................................................ 9

3. PLOTTER DISPLAY OVERVIEW .................................................................................... 10

3.1 ENLARG/SHRINK THE DISPLAY RANGE ............................................................................................... 10

3.2 STOP THE NAVIGATION BY THE CURRENT ROUTE ....................................................................................... 10

3.3 ADD A NEW WAYPOINT TO THE ROUTE.................................................................................................. 11

4. WAYPOINT AND ROUTE................................................................................................. 11

4.1 REGISTERING WAYPOINTS ................................................................................................................ 12

4.1.1 Insert a NEW waypoint..............................................................................................13

4.1.2 EDIT a waypoint .........................................................................................................13

4.1.3 DELETE a waypoint...................................................................................................14

4.2 ROUTE PLANNING .......................................................................................................................... 14

4.2.1 Edit a route..................................................................................................................15

4.2.2 Navigation by the Route Forward ...........................................................................16

4.2.3 Navigation by the Route Reverse...........................................................................17

4.2.4 Stop navigation...........................................................................................................18

4.2.5 Create a new route ....................................................................................................18

4.2.6 Delete a route .............................................................................................................18

5. NAVIGATION SETTING .................................................................................................. 19

5.1 SETUP XTE (CROSS TRACK ERROR)ALARM........................................................................................ 19

5.2 SET UP SPEED ALARM..................................................................................................................... 20

5.3 SET UP ARRIVAL ALARM AND ANCHOR WATCH ALARM ...................................................................... 21

5.4 SET UP THE TRACK RECORD.............................................................................................................. 22

6. MAINTENANCE & DIAGNOSTICS.................................................................................. 24

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

6.1 MAINTENANCE.............................................................................................................................. 24

6.2 ERROR ALARMS DISPLAYED .............................................................................................................. 24

6.3 DIAGNOSTIC TEST .......................................................................................................................... 24

6.3.1 Software version ......................................................................................................25

6.3.2 GNSS monitoring .....................................................................................................26

6.3.3 Key test......................................................................................................................26

6.3.4 LCD test ....................................................................................................................26

6.3.5 Erase navigation data..............................................................................................26

6.3.6 Factory default..........................................................................................................26

7. MENU OPERATION .......................................................................................................... 28

7.1 BASIC MENU OPERATION ......................................................................................................... 28

7.2 GNSS SETTING........................................................................................................................... 28

7.2.1 GEODETIC DATUM ..................................................................................................28

7.2.2 RAIM ............................................................................................................................29

7.2.3 ACCURACY LEVEL ..................................................................................................29

7.2.4 RTCM...........................................................................................................................30

7.3 SYSTEM SETTING....................................................................................................................... 30

7.3.1 KEY BUZZER .............................................................................................................30

7.3.2 LCD/KEY DIMMER ....................................................................................................30

7.4 ALARM SETTING........................................................................................................................ 30

7.4.1 ALARM LIST ...............................................................................................................30

7.4.2 ALARM PERIOD ........................................................................................................30

7.4.3 ALARM HISTORY......................................................................................................30

8. INSTALLATION................................................................................................................. 31

8.1 INSTALLATION OF MAIN UNIT................................................................................................... 31

8.2 INSTALLATION OF ANTENNA UNIT............................................................................................ 31

8.3 CABLING................................................................................................................................... 32

8.3.1 POWER CONNECTION ..........................................................................................32

8.3.2 GPS DATA OUTPUT................................................................................................32

8.3.3 GROUNDING ............................................................................................................32

8.4 INITIAL SETTINGS ...................................................................................................................... 32

8.4.1 SENTENCE SETTING .............................................................................................32

8.1.2 BAUD RATE SETTING...........................................................................................35

APPEDIX I MENU TREE..................................................................................................... 36

APPEDIX II TECHNICAL SPECIFICATIONS.................................................................... 37

APPEDIX III SENTENCE DISCRIPTION........................................................................... 38

APPEDIX IV INSTALLATION DRAWINGS....................................................................... 54

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

1. PRODUCT FEATURES

The NGR-3000 is a GPS NAVIGATOR and consists of a display unit and an antenna unit.

The high sensitive GPS NAVIGATOR tracks up to 50 satellites simultaneously. It ensures optimum

accuracy in determination of vessel position, course and speed.

The main features of the NGR-3000 are:

• Comprehensive navigation data displays.

• Alarms: Lost of Position.

• Lost of differential signal, HDOP Exceeded.

• Menu-driven operation.

• 7 inch, color LCD, touch screen operation

• 2 GPS data outputs, 1 INS output, 1 INS input.

• A DGPS beacon receiver (external) may be connected to the NGR-3000 to add DGPS function.

The product meets the requirements of relative IMO and IEC regulation & standards, including

IMO MSC112 (73), IEC61108-1, etc.

EQUIPMENT LIST:

Scope of Supply

No.

Name

Quantity

Description

NGR-3000 Main Unit

GPS Antenna

Cable length 10m or 20m

Installation Materials

3.1

Mount Pole

3.2

Steel Tie

3.3

Accessories

Options

4.1

DGPS Beacon

4.2

Flush Mount Brackets

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

2. OPERATIONAL OVERVIEW

2.1 CONTROL DESCRIPTION

The GPS NAVIGATOR can by operated by key & knob on panel or touch-screen.

When operating with knob, turn the knob to select an item on screen and press the knob to confirm

the selection.

Panel Button

Description

Turn to select an item.

Press down to confirm the selection or input.

PWR

Power ON/OFF.

To power OFF, press and hold this key more than 3

seconds.

DIM

Brightness key for LCD brightness control.

Touch-screen Button

Description

Enter the Menu, and use as delete button in input

option.

DATA

Change among four screens:

- Plotter display;

- Highway display;

- Compass display;

- Nav data display.

ACK ALL

Acknowledge Alarm.

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

Panel Button

Description

Change display mode.

The touch screen shows position in latitude and longitude, course, speed, date and time.

The NGR-3000 takes about 60 seconds to find position when turned on for the very first time.

Thereafter, it takes about 15 seconds to find position each time the power is turned on.

After fixed, the accurate position (in latitude and longitude) appears on the display.

Item

Symbol

Remark

①

Fix Mode

GPS/DGPS

②

Position in Lan & Lon

③

Course over Ground

COG

④

Alarm Column

Warning in orange and alarm

in red color

⑤

Time

UTC

UTC time

LMT

Local time

⑥

Final Fixing Time

LAST FIX

⑦

Quantity of Satellites Being Tracked

SATELLITE

⑧

Horizontal Dilution Of Precision

HDOP

⑨

Receiver Autonomous Integrity Monitoring

RAIM

Safe/unsafe/caution

⑩

Accuracy Level

10-100m

⑪

Speed over Ground

SOG

⑨

①

②

③

④

⑩

○

⑧

NGR-3000 USER’S MANUAL

NGR-3000 OM E. 20170815-02

Indication

Meaning

GP-2D/ GP-3D

GPS fix

GP-D2D/GP-D3D

DGPS fix

BD-2D/BD-3D

BD fix

BD-D2D/BD-D3D

DBD fix

GN-2D/GN-3D

GN fix

GN-D2D/GN-D3D

DGN fix

2.2 TURN ON AND OFF THE POWER

Turn on the power

Press the PWR button to turn on the power.

Usually it will take about one minute to find its position when turned on for the very first time.

The equipment shows receiver status at the bottom of the screen.

Turn off the power

Press and hold down the PWR button for 3s until the screen goes blank.

2.3 ADJUST DIMMER AND CONTRAST

There are two ways to adjust the brightness and contrast of the LCD.

-Adjust the brightness in the [SYSTEM SETTING].

-Press the DIM button to adjust the brightness.

Note:

When the power is turned off, the last status of brightness is stored. Therefore when the power

is turned on, the screen will display with the last brightness before powered off.

Inhaltsverzeichnis

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung