3. Connect the black cable to the negative on the battery.
(You will need (2) adjustable wrenches). Use 1 wrench
to hold the bolt while tightening the nut with the other
wrench. ( ut, bolt and washers provided).
4. Make sure connection is tight (as shown on the right )
5. Slide black boot up to cover connection.
(as shown on the right )
6. Put top cover back on and secure with 5/32 allen wrench.
To use the PP2.6 to ower your equi ment:
4. Turn your equipment on.
Should at anytime you hear a loud high itch buzzing/bee ing noise, shut down the
PP2.6 and charge (instructions on next age). This is the audible alarm to let you know
the battery voltage is low.
.
Plug your equipment
into the power outlet.
Turn the bottom power
switch to on; (-) pressed in.
The switch should light up.
Turn the top solid red switch
to power on.
2.
