Nexcom NCb-301 Bedienungsanleitung

NEXCOM International Co., Ltd.

Published September 2013 www.nexcom.com

Intelligent Digital Security

IP Camera

NCb-301

User Manual

Content

Contents

Preface

Disclaimer.............................................................................................. iv

Acknowledgements ............................................................................... iv

Regulatory Compliance Statements........................................................ iv

Declaration of Conformity...................................................................... iv

RoHS Compliance ................................................................................... v

Safety Information ................................................................................. vi

Installation Recommendations................................................................ vi

Safety Precautions..................................................................................vii

Technical Support and Assistance..........................................................viii

Conventions Used in this Manual..........................................................viii

Package Contents.................................................................................. ix

Chapter 1: Product Introduction

Overview ................................................................................................1

Key Features ...........................................................................................1

Hardware Specifications..........................................................................2

Physical Descriptions ...............................................................................3

DI/O Pinout Assignment..........................................................................3

Chapter 2: Camera Configuration

Accessing the Camera’s Configuration Menu (Graphical User Interface) ..4

Installing NexCam Assistant..............................................................4

NexCam Assistant ............................................................................7

Web Browser (Internet Explorer).......................................................9

Configuring the Camera’s Setting .........................................................10

Browsing Through the Configuration Menu.......................................11

Video....................................................................................................12

Video Stream.....................................................................................12

Stream 1 (H.264)............................................................................12

Stream 2 (H.264)............................................................................13

Stream 3 (MJPEG) ..........................................................................13

Camera Settings................................................................................14

Image Adjustments ........................................................................14

Mirror & Flip...................................................................................15

Wide Dynamic Range (WDR) ..........................................................15

White Balance................................................................................15

Exposure ........................................................................................15

Day & Night ...................................................................................16

Overlay Settings.................................................................................17

Contents........................................................................................17

Privacy Mask......................................................................................18

Settings..........................................................................................18

Mask Zones....................................................................................19

Network ...............................................................................................20

TCP/IP................................................................................................20

IP Address Configuration................................................................20

Current Network Settings...............................................................20

FTP....................................................................................................21

FTP Server ......................................................................................21

Content

Test Remote FTP Server...................................................................21

SMTP.................................................................................................22

SMTP Server...................................................................................22

Ports..................................................................................................23

HTTP..............................................................................................23

RTSP ..............................................................................................23

Events...................................................................................................24

Motion Detection ..............................................................................24

Settings..........................................................................................24

Detection Zones.............................................................................25

Alarm In/Out Trigger..........................................................................26

Alarm In Out Actions......................................................................26

Event Actions ....................................................................................27

When Motion Detection Triggered .................................................27

When Alarm In Triggered ...............................................................27

System..................................................................................................29

Audio................................................................................................29

Audio Settings ...............................................................................29

User Management.............................................................................30

Add/Modify User Accounts.............................................................30

User List.........................................................................................30

SD Card Management.......................................................................31

SD Card Information ......................................................................31

File List...........................................................................................31

Date & Time ......................................................................................32

Current Camera Time.....................................................................32

Time Settings .................................................................................32

Date & Time Format.......................................................................33

NTP Server .....................................................................................33

Firmware Upgrade.............................................................................34

Firmware Version ...........................................................................34

Update...........................................................................................34

Maintenance .....................................................................................35

Maintain ........................................................................................35

Camera Name Settings...................................................................35

Chapter 3:

Viewing Live Video via VLC Media Player.............36

Preface

This publication, including all photographs, illustrations and software, is

part of this manual may be reproduced, copied, translated or transmitted in

any form or by any means without the prior written consent from NEXCOM

International Co., Ltd.

Disclaimer

The information in this document is subject to change without prior notice and

does not represent commitment from NEXCOM International Co., Ltd. However,

users may update their knowledge of any product in use by constantly checking

its manual posted on our website: http://www.nexcom.com. NEXCOM shall

not be liable for direct, indirect, special, incidental, or consequential damages

arising out of the use of any product, nor for any infringements upon the rights

of third parties, which may result from such use. Any implied warranties of

merchantability or fitness for any particular purpose is also disclaimed.

Acknowledgements

NCb-301 is a trademark of NEXCOM International Co., Ltd. All other product

names mentioned herein are registered trademarks of their respective

owners.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class B devices and

describes how to keep the system CE compliant.

Declaration of Conformity

FCC

This equipment has been tested and verified to comply with the limits for

a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference

to radio communications. Operation of this equipment in a residential area

(domestic environment) is likely to cause harmful interference, in which

case the user will be required to correct the interference (take adequate

measures) at their own expense.

The product(s) described in this manual complies with all applicable

European Union (CE) directives if it has a CE marking. For computer systems

to remain CE compliant, only CE-compliant parts may be used. Maintaining

CE compliance also requires proper cable and cabling techniques.

Preface

RoHS Compliance

NEXCOM RoHS Environmental Policy and Status

Update

This publication, including all photographs, illustrations

and software, is protected under international copyright

may be reproduced, copied, translated or transmitted in any form or by any

means without the prior written consent from NEXCOM International Co.,

Ltd.

RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg) < 0.1%

or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent Chromium

(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or

1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm.

In order to meet the RoHS compliant directives, NEXCOM has established

an engineering and manufacturing task force to implement the introduction

of green products. The task force will ensure that we follow the standard

NEXCOM development procedure and that all the new RoHS components

and new manufacturing processes maintain the highest industry quality

levels for which NEXCOM are renowned.

The model selection criteria will be based on market demand. Vendors and

suppliers will ensure that all designed components will be RoHS compliant.

How to recognize NEXCOM RoHS Products?

For existing products where there are non-RoHS and RoHS versions, the

suffix “(LF)” will be added to the compliant product name.

All new product models launched after January 2006 will be RoHS compliant.

They will use the usual NEXCOM naming convention.

Preface

Warnings

Read and adhere to all warnings, cautions, and notices in this guide and

the documentation supplied with the chassis, power supply, and accessory

modules. If the instructions for the chassis and power supply are inconsistent

with these instructions or the instructions for accessory modules, contact

the supplier to find out how you can ensure that your computer meets

safety and regulatory requirements.

Cautions

Electrostatic discharge (ESD) can damage system components. Do the

described procedures only at an ESD workstation. If no such station is

available, you can provide some ESD protection by wearing an antistatic

wrist strap and attaching it to a metal part of the computer chassis.

Safety Information

Before installing and using the device, note the following precautions:

▪Read all instructions carefully.

▪Do not place the unit on an unstable surface, cart, or stand.

▪Follow all warnings and cautions in this manual.

▪When replacing parts, ensure that your service technician uses parts

specified by the manufacturer.

▪Avoid using the system near water, in direct sunlight, or near a heating

device.

▪The load of the system unit does not solely rely for support from the

rackmounts located on the sides. Firm support from the bottom is highly

necessary in order to provide balance stability.

▪The network camera is provided with a battery-powered real-time clock

circuit. There is a danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Discard used batteries according to the manufacturer’s

instructions.

Installation Recommendations

Ensure you have a stable, clean working environment. Dust and dirt can get

into components and cause a malfunction. Use containers to keep small

components separated.

Adequate lighting and proper tools can prevent you from accidentally

damaging the internal components. Most of the procedures that follow

require only a few simple tools, including the following:

▪A Philips screwdriver

▪A flat-tipped screwdriver

▪A grounding strap

▪An anti-static pad

Using your fingers can disconnect most of the connections. It is recommended

that you do not use needle-nose pliers to disconnect connections as these

can damage the soft metal or plastic parts of the connectors.

Preface

Safety Precautions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any power sources before cleaning. Use

a damp cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a stable surface during installation. Dropping it or

letting it fall may cause damage.

8. Make sure the voltage of the power source is correct before connecting

the equipment to the power source.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical

shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b.Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d.The equipment does not work well, or you cannot get it to work

according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. Do not place heavy objects on the equipment.

17. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

Preface

Technical Support and Assistance

1. For the most updated information of NEXCOM products, visit NEXCOM’s

website at www.nexcom.com.

2. For technical issues that require contacting our technical support team or

sales representative, please have the following information ready before

calling:

– Product name and serial number

– Detailed information of the peripheral devices

– Detailed information of the installed software (operating system,

version, application software, etc.)

– A complete description of the problem

– The exact wordings of the error messages

Warning!

1. Handling the unit: carry the unit with both hands and handle it with care.

2. Maintenance: to keep the unit clean, use only approved cleaning products

or clean with a dry cloth.

Conventions Used in this Manual

Warning:

Information about certain situations, which if not observed,

can cause personal injury. This will prevent injury to yourself

when performing a task.

CAUTION!

CAUTION!CAUTION! Caution:

Information to avoid damaging components or losing data.

Note:

Provides additional information to complete a task easily.

Preface

Package Contents

Quick guide

The NCb-301 package contains the following accessories:

Chapter 1: Product Introduction

Overview Key Features

▪3MP @30fps, Full HD 1080P @60fps

▪Motorized lens 3-10 mm, F1.4

▪Advanced P-Iris

▪100dB True WDR

▪Micro SD card slot

▪Support 0°C~60°C / 0°F~140°F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nexcom IP-Kamera Handbücher

Nexcom

Nexcom NCi-211 Bedienungsanleitung

Nexcom

Nexcom NCr-661-VHA Bedienungsanleitung

Nexcom

Nexcom NCr-301-VHR Bedienungsanleitung

Nexcom

Nexcom NCo-301-VHR Bedienungsanleitung

Nexcom

Nexcom NCb-231 Bedienungsanleitung

Nexcom

Nexcom NCi-312 Bedienungsanleitung

Nexcom

Nexcom NCb-221 Bedienungsanleitung

Nexcom

Nexcom NCi-311 Bedienungsanleitung

Nexcom

Nexcom NCm-301-V Bedienungsanleitung

Nexcom

Nexcom NCr-312-OVR Bedienungsanleitung

Nexcom

Nexcom NCr-302-VHR Bedienungsanleitung

Nexcom

Nexcom NCm-301-V Bedienungsanleitung

Nexcom

Nexcom NCb-211 Bedienungsanleitung

Nexcom

Nexcom NCb-311 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung