Nexsan BEAST BT60 Bedienungsanleitung

Nexsan BEAST

Storage Systems

Installation Guide

Part Number: P0450131, Rev. B NEXSAN | 1289 Anvilwood Avenue | Sunnyvale, CA | 94089 USA

Printed Saturday, April 2, 2022 | www.nexsan.com

Trademarks

Nexsan®, BEAST™, BEAST P™, BEAST Elite™, BEAST X™, Nexsan E60™, Nexsan E60V™, Nexsan E60VT™, Nexsan E60P™, Nexsan

E60X™, Nexsan E48™, NexsanE48V™, Nexsan E48P™, Nexsan E48VT™, Nexsan E48X™, Nexsan E32F™, Nexsan E32V™, Nexsan

E32X™, Nexsan E18™, Nexsan E18P™, Nexsan E18F™, Nexsan E18V™, Nexsan E18X™, and the Nexsan logo are trademarks or registered

trademarks of Nexsan.

All other trademarks and registered trademarks are the property of their respective owners.

Patents

This product is protected by one or more of the following patents, and other pending patent applications worldwide:

United States patents US8,191,841, US8,120,922

United Kingdom patents GB2296798B, GB2297636B, GB2466535B, GB2467622B, GB2467404B

Regulatory compliance

United States Statement for FCC: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/-3-3, CISPR 22 Class A

Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,

EN 61000-4-11)

Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and Canada), CE Marking (Europe)

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR

(Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Use and limitations of this document

Unauthorized use, duplication, or modification of this document in whole or in part without the written consent of Nexsan is strictly prohibited.

Nexsan reserves the right to make changes to this manual, as well as the equipment and software described in this manual, at any time without

notice. This manual may contain links to Web sites that were current at the time of publication, but have since been moved or become inactive. It

may also contain links to sites owned and operated by third parties. Nexsan is not responsible for the content of any such third-party site.

About this manual v

Conventions v

Notes, tips, cautions, and warnings v

Contacting Nexsan vi

Service and support vi

Related Documents vi

Safety notices vii

Revision history viii

Chapter 1: Overview 1

Front panel 2

Legend 2

Rear panel, BT60 4

Legend 5

Field-replaceable modules 5

Connectors 6

LEDs 7

Switches 9

Rear panel, BT60X 10

Legend 10

Field-replaceable modules 10

Connectors 11

LEDs 11

Drive bay interior 12

Legend 12

Physical characteristics 13

Dimensions, Nexsan BEAST 13

Power 13

Cooling 13

Materials 13

Environment 14

Chapter 2: Getting Started 15

Taking delivery of your Nexsan BEASTStorage System 16

Contents

Nexsan BEAST BT60 and BT60X

Installation Guide

Nexsan

www.nexsan.com

iii

Unpack the Nexsan Storage System 16

Before installation 19

Required tools and equipment 19

Prepare the site 19

Take proper ESDprecautions 20

Prepare the Nexsan BEAST Storage System 21

Chapter 3: Installing the Nexsan BEAST Storage System 23

Prepare the rack and rails 24

Mount the Nexsan BEAST Storage System 25

Restore the power supply units 27

Reseat the controllers 28

Attach the cable management arm 30

Load the disk drives 32

Attach BT60 Storage System to LAN and SAN 37

Power on the Nexsan BEAST Storage System 38

Attach a Nexsan Storage Expansion to a Nexsan Storage System 38

Hot-add Nexsan Storage Expansions to a powered-up Nexsan Storage System 38

Attach Nexsan Storage Expansions to a powered-down system 41

Set up the Nexsan Storage System 44

Glossary 45

Contents

iv Part Number: P0450131, Rev. B

www.nexsan.com

Nexsan BEAST™ and E-Series™

About this manual

This installation guide provides information and steps for performing the physical installation of the Nexsan

BEASTBT60 Storage Systems and the Nexsan BEASTBT60X Storage Expansions.

Note While Nexsan makes every effort to ensure the accuracy of technical documentation, screen images

and procedures may change after publication. In case of discrepancy, please check for the latest updates

on the E-Series and BEAST Documents and Downloads page. Also, refer to the latest Release Notes.

Conventions

Here is a list of text conventions used in this document:

Convention Description

underlined blue Cross-references, hyperlinks, URLs, and email addresses.

boldface Labels on the physical Nexsan Storage System or interactive items in the graphical

user interface (GUI).

italics System messages and non-interactive items in the GUI. References to software user

guides.

monospace Command-line interface (CLI) text or text that refers to file or directory names.

monospace

bold

Text strings that must be entered by the user in the CLI or in text fields in the GUI.

Notes, tips, cautions, and warnings

Note Notes contain important information, present alternative procedures, or call attention to certain items.

Tip Tips contain handy information for end-users, such as other ways to perform an action.

CAUTION: In hardware manuals, cautions alert the user to items or situations which may cause

damage to the Nexsan Storage System or result in mild injury to the user, or both. In software

manuals, cautions alerts the user to situations which may cause data corruption or data loss.

WARNING: Warnings alert the user to items or situations which may result in severe

injury or death to the user.

About this manual

Nexsan BEAST BT60 and BT60X

Installation Guide

Nexsan

www.nexsan.com

Contacting Nexsan

For questions about Nexsan products, please visit the Nexsan support Web page, and the E-Series and

BEAST Documents and Downloads page. If you are unable to find the answer to your question there,

please see our contact information below.

Service and support

Nexsan's Technical Services Group provides worldwide assistance with installation, configuration, software

support, warranty, and repair for all Nexsan products. A variety of service and support programs are

available to provide you with the level of coverage and availability your operation requires.

Nexsan Headquarters

1289 Anvilwood Avenue

Sunnyvale, CA 94089

United States of America

Worldwide Web site

www.nexsan.com

E-Series and BEAST support:

https://helper.nexsansupport.com/esr_support

European Head Office, UK

Units 33–35 Parker Centre

Mansfield Road

Derby, DE21 4SZ

United Kingdom

Contact:

https://helper.nexsansupport.com/contact

Related Documents

The following Nexsan product manuals contain related information:

Nexsan BEAST BT60 and BT60X Storage Systems FRU Removal and Replacement Guide

Nexsan High-Density Storage User Guide

Nexsan Snapshots and Replication User Guide

Nexsan Multipathing Best Practices Guide

About this manual

vi Part Number: P0450131, Rev. B

www.nexsan.com

Nexsan BEAST™ and E-Series™

Safety notices

This guide covers the Nexsan BEAST Storage Systems only. Refer to the relevant product manuals for

information on other Nexsan Storage Systems or Storage Expansions and other Nexsan products

mentioned in this guide.

Always observe the following precautions to reduce the risk of injury and equipment damage:

WARNING: There is a risk of ELECTRIC SHOCK if Nexsan BEAST components are removed or

tampered with when a Nexsan Storage System power is on. Only a trained operator may remove

certain FRUs. The Nexsan BEAST Storage System include the following FRUs:

Power Supply modules

RAID Controller and Expansion modules

Disk drives

Fan modules

Computer components and disk drives are sensitive to static discharge. Take precautions to discharge

any electrostatic charge from your person before and while handling components with your hands or any

tools. Use an anti-static wrist-strap.

Ensure correct lifting methods are used when removing the storage system from its packaging and

positioning it into its required location. When lifting the system, two people at either end should lift slowly

with their feet spread out to distribute the weight. Always keep your back straight and lift with your legs.

When removing the storage system from the packaging, DO NOT lift the enclosure by any plastic parts

or module handles on the chassis. Doing so may cause damage to the chassis or to internal

components, or both. Lift the enclosure ONLY by the bottom edges of the chassis, using safe lifting

practices.

The storage system should only be installed in a clean, dry environment. The operating temperature is 5º

to 35º C (41º to 95º F), with operating relative humidity at 20 to 80%, non-condensing.

Do not install the storage system in an enclosed cabinet or other small area without ventilation.

When installing the storage system as a rack-mounted component, ensure that all Nexsan-supplied

mounting fixtures are secure. All bolts and screws should be fully tightened. Failure to comply with this

may result in the storage system not being fully supported in the rack and could lead to the product falling

from the rack, causing personal injury or damage to other rack components.

Ensure that the rack is sufficiently stable by having wall anchors and/or stabilizing legs, and that the floor

supporting the rack has sufficient strength for the overall weight loading.

The cordset specification for the Nexsan BEAST in North America is USA IEC C13 to IEC C14, rated

250V/15A. When applying power to the storage system, use ONLY the IEC power cords originally

supplied with it. Do NOT use other power cords, even if they appear identical to the supplied cords.

Only a fully-trained Service Engineer is authorized to disassemble any other part of the storage system,

and then only when the storage system is powered off.

The Nexsan BEAST Storage System has multiple power connections; as a result, you must remove all

power leads to completely remove power from the storage system.

The Nexsan BEAST Storage System does not have a power switch. Do NOT attach the power cords

until the storage system is fully installed, with all disk drives in place.

Contents

Nexsan BEAST BT60 and BT60X

Installation Guide

Nexsan

www.nexsan.com

vii

Revision history

This section lists updates and new material added to the Nexsan BEAST Installation Guide.

P450131 Rev. B, March 2022

Updated for technical accuracy, applied new Nexsan template and branding.

P0450131 Rev. A, June 2016

Changed to new part numbering system.

NXS-SSBT-IG Rev. 02, May 2016

Updated warnings and requirements for 110V operation.

NXS-SSBT-IG Rev. 01, November 2015

First release of the Nexsan Nexsan BEAST BT60 and BT60X Installation Guide.

Contents

viii Part Number: P0450131, Rev. B

www.nexsan.com

Nexsan BEAST™ and E-Series™

Chapter 1

Chapter 1:Overview

Nexsan BEAST BT60 and Nexsan BEAST BT60X 4U, rack-mountable Storage SystemsExpansions can

hold up to 60 SATA data disks.

This chapter contains the following sections:

Front panel 2

Rear panel, BT60 4

Rear panel, BT60X 10

Drive bay interior 12

Physical characteristics 13

Nexsan BEAST BT60 and BT60X

Installation Guide

Nexsan

www.nexsan.com

Front panel

Use this section to understand front panel components.

Figure 1-1: Nexsan BEAST front panel

Legend

Use the following tables as a legend for the front panel diagram.

Table 1-2: Field-replaceable modules

Number Component Description

1. Front Cooling

Fans

Central Fan

Tube

The front cover can be opened and the fans inside can be field-replaced in

the event of failure (see the Nexsan BEAST BT60 and BT60X

FRURemoval and Replacement Guide).

Table 1-3: Other modules

Number Component Description

2. Active Drive Drawers ()

Front panel

2 Part Number: P0450131, Rev. B

www.nexsan.com

Nexsan BEAST™ and E-Series™

Andere Handbücher für BEAST BT60

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nexsan Lagerung Handbücher

Nexsan

Nexsan Nexsan Unity Storage 316 Bedienungsanleitung

Nexsan

Nexsan Unity2200 Bedienungsanleitung

Nexsan

Nexsan Unity Storage 424 Expansion Bedienungsanleitung

Nexsan

Nexsan BEAST BT60 Bedienungsanleitung

Nexsan

Nexsan BEAST Series Bedienungsanleitung

Nexsan

Nexsan Unity 4400 Bedienungsanleitung

Nexsan

Nexsan US424 Bedienungsanleitung

Nexsan

Nexsan BEAST BT60 Stücklistenhandbuch

Nexsan

Nexsan UNITY6900 Bedienungsanleitung

Nexsan

Nexsan Unity 4400 Bedienungsanleitung

Nexsan

Nexsan US316 Bedienungsanleitung

Nexsan

Nexsan E Series Bedienungsanleitung

Nexsan

Nexsan SATAboy Series Bedienungsanleitung

Nexsan

Nexsan UNITY3300 Bedienungsanleitung

Nexsan

Nexsan Unity 6900 Bedienungsanleitung

Nexsan

Nexsan UNITY7900 Bedienungsanleitung

Nexsan

Nexsan UNITY5000 Bedienungs- und Wartungshandbuch

Nexsan

Nexsan SATABoy Bedienungsanleitung

Nexsan

Nexsan E60 Bedienungsanleitung

Nexsan

Nexsan Unity Series Bedienungsanleitung

Nexsan

Nexsan U2G460 Bedienungsanleitung

Nexsan

Nexsan Unity 2200 Bedienungs- und Wartungshandbuch

Nexsan

Nexsan unity storage 224 Bedienungsanleitung

Nexsan

Nexsan Unity 2200 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung