Nibe RCU 20 Bedienungsanleitung

MOS GB 0804-4

RCU 10/20

511401

INSTALLATION AND MAINTENANCE INSTRUCTIONS

RCU 10 / 20

For FIGHTER 360P / 11XX / 12XX / 1250 / 13XX

LEK

1RCU 10/20

General __________________________________ 2

Product description ________________________________ 3

Quick start guide _________________________ 4

Troubleshooting ___________________________________ 7

Installation ______________________________ 8

Assembly_________________________________________ 8

Network connections _____________________________ 10

GSM modem ____________________________________ 11

Digital inputs ____________________________________ 12

Indicators _______________________________ 13

Indicators on RCU ________________________________ 13

Indicator on GSM modem _________________________ 13

Starting ________________________________ 14

General _________________________________________ 14

RCU conﬁguration software________________________ 14

Search for connected units_________________________ 14

Changing IP settings ______________________________ 15

Logging in_______________________________________ 16

Web interface ___________________________ 17

Web browser requirements ________________________ 17

Menu overview __________________________________ 17

Web interface – Settings _________________ 18

Language selection _______________________________ 18

Log ____________________________________________ 18

Module _________________________________________ 19

E-mail __________________________________________ 19

Network ________________________________________ 19

Modem _________________________________________ 20

User____________________________________________ 20

Web interface – FIGHTER 360P ____________ 21

Overview diagram ________________________________ 21

Operating data___________________________________ 22

Operating data, extended__________________________ 23

Alarm/status _____________________________________ 24

Log ____________________________________________ 24

SMS commands – FIGHTER 360P __________ 25

SMS commands __________________________________ 25

SMS commands for interrogating the heat pump ______ 25

SMS commands for controlling the heat pump ________ 25

Contents

Web interface – FIGHTER 11XX/12XX ______ 26

Overview diagram ________________________________ 26

Operating data___________________________________ 27

Operating data, extended__________________________ 28

Operating data, external units ______________________ 28

Alarm/status _____________________________________ 29

Log ____________________________________________ 29

SMS commands – FIGHTER 11XX/12XX ____ 30

SMS commands __________________________________ 30

SMS commands for interrogating the heat pump ______ 30

SMS commands for controlling the heat pump ________ 30

Web interface – FIGHTER 13XX ___________ 31

Overview diagram ________________________________ 31

Status __________________________________________ 32

Operating data, external units ______________________ 33

Operating data, compressor________________________ 34

Log ____________________________________________ 34

SMS commands – FIGHTER 13XX __________ 35

SMS commands __________________________________ 35

SMS commands for interrogating the heat pump ______ 35

SMS commands for controlling the heat pump ________ 35

Component locations ____________________ 36

List of components _______________________________ 36

Miscellaneous ___________________________ 37

Technical speciﬁcations ____________________________ 37

Enclosed kit _____________________________________ 37

Frequently asked questions ______________ 38

2RCU 10/20

General

In order to get the ultimate benefit from your RCU communications unit you should read through

these Installation and Maintenance Instructions.

The part concerning Modem and SMS can only be applied to RCU

To be completed when the communications unit has been installed

General

Installation date

Installation engineers

MAC ID

Date __________ Signature __________________________________

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Rights to make any design or technical modiﬁcations are reserved.

3RCU 10/20

General

Product description

The RCU consists of a communications module, a GSM

modem with an antenna (only RCU 10) and a separate

power supply unit with jack for plugging into a wall socket.

The antenna can be placed outside the enclosure.

It is possible to connect to the RCU two independent

switch functions to detect external events such as a move-

ment alarm or freezing protection.

Note that all conﬁguration of the unit requires that a com-

puter with support for ”JAVA-applets” is connected, even

if only text messaging is going to be used.

Only RCU 10

The RCU enables operations to be controlled and moni-

tored using a computer connected to a local network or

via the Internet. The integrated GSM module also enables

control and monitoring by sending text messages from a

mobile phone. For the GSM function to work, the commu-

nications module must be equipped with a valid GSM sub-

scription. This may for example be a cash card or a special

telematics subscription.

If a SIM card is used, it must be configured

so that a PIN code is not used to obtain

connection. This can be done in a mobile

telephone or by the service provider.

NOTE!

4RCU 10/20

Quick start guide

To start the installation of the RCU you need the following:

RCU and the software supplied on CD•

Star head screwdriver to open the RCU and the heat•

pump.

For connection to a local network:

Computer, connected to the same local network that•

the RCU will be connected to

Network cable (not crossover)•

Network settings for your local network. Received•

from your network administrator

For direct connection to the computer:

Computer with network card•

Crossover network cable•

Insert a SIM card if the GSM modem is to be used.

Remember that the pin code must be deactivated

and if it is pay as you go that there are credits on

the card. When the lamp ﬂashes at 3 s intervals it

means that the modem has a connection with the

GSM network.

Connect the RCU unit to the heat pump with the

8-pin connector. See ”Installation” for parts for con-

necting your heat pump to the RCU.

Connect the power adapter to the 4-pin connector.

The RCU is conﬁgured via the network connection.

Connect the RCU to a local network or directly to a

computer.

If the RCU is to be connected directly to a

computer a crossover network cable must

be used!

NOTE!

5RCU 10/20

Quick start guide

Check the computer’s IP address as follows:

Press ”Start” – ”Run”- type ”cmd” + enter. A dos

window now opens

Type”ipconﬁg” + enter

The computer’s IP address and Subnet Mask will be

shown

For example IP address: 10.1.0.0

Subnet mask 255.0.0.0

Assign an IP-address if the computer does not have

one.

Connect the power adapter to a wall socket and

check that the LEDs light. “Status” should light

green, “Serial Link” should ﬂash and “Link” must

light orange (100Mbps) or green (10Mbps) if the

network cable is connected.

Turn on the computer and insert the CD supplied

and follow the instructions.

Start the conﬁguration program Netbiter conﬁg. The

program automatically searches for RCUs connected

to the network. If the program does not ﬁnd the

RCU refer to the Troubleshooting section. If Netbiter

is already running and it is started no RCU is found.

6RCU 10/20

Quick start guide

Double click on the line with your RCU in the

Netbiter window. A new window opens.

The RCU is connected to a local network:

Enter the network settings that apply to your net-

work. To obtain the necessary information concer-

ning your network settings, please contact your

network administrator.

The RCU is directly connected to the computer:

Enter the ﬁrst three values from your computer’s IP

address, for example, 10.1.1. The fourth is set to

a value other than the one used in computer’s IP

address.

Example:

If the computer has the IP address 10.1.1.1 then set

the RCU address to 10.1.1.X, where X can be set

to any number between 2 and 254 (not 1, as this is

used by the computer in this example).

Complete setting by giving a valid password and

press ”Set”. The factory-set password is ”admin”.

Write down the password and keep it in a safe pla-

ce. If the password is lost the RCU must be returned

for reprogramming

Wait a moment and then run a new ”scan” in

Netbiter. The RCU should have a new IP address.

Activate the Heat pump for RCU (remember to ac-

tivate the service menu)

- Fighter 360P Activate in menu 9.1.3

- Fighter 11XX Activate in menu 9.2.15

- Fighter 12XX ”

- Fighter 13XX Activate in menu 9.1.3

Start the web browser and enter the RCUs IP address in the

address ﬁeld and press enter. A log in box will now appear.

Both the user name and password are ”admin” (unless it

has been changed). If ”page cannot be viewed” is shown

go to troubleshooting.

Check that it is the correct heat pump on the overview dia-

gram (if you must choose model see troubleshooting)

”Select ”Other” in the settings window. Make settings on

the following pages:

• Module:GivesInformationaboutthelocationofthe

RCU (used in alarms in SMS and e-mail).

• E-mail:Settingsifthealarmistobegivenviae-mail.

• Network:Normallydoesnotneedtobechanged(see

section ”Change IP settings” in event of problems).

• Modem*:SettingsforSMSanddial-upconnectionvia

GSM. Refer to the section ”Modem” for further infor-

mation.

• User:Addandmodifyinformationforusers.Bearin

mind that the cell phone number must be given with

the country code, for example +46xxxxxxxx.

• ModbusTCP:Neednotbechanged.Onlyforusersof

ModbusTCP.

* OnlyRCU10

7RCU 10/20

Quick start guide

Troubleshooting

Netbiter cannot ﬁnd the RCU:

• CheckthatonlyoneNetbitercongisrunningonthe

computer.

• Checkthenetworkconnection;thattheRCUiscon-

nected to the network/computer, that the correct type

of network cable is used for the RCU, that the LED

”Link” lights green or orange on the RCU.

• Only for direct connection to computers: Check

that the RCU’s IP address is not the same as the

computer’s IP address. Action: Change the IP address

in the RCU.

• Only for direct connection to computers: Change

the computer’s IP address to 10.200.1.10 with Subnet

mask 255.0.0.0 under TCP/IP settings in the computer.

Restart the RCU.

• Clickon”AdvancedOptions”inNetbiter,Checkoff

in ”Enable internal DHCP”. Press ”scan” in Netbiter. If

the RCU is found it means that DHCP is selected in the

RCU. If the DHCP is not to be used, close the DHCP

with Netbiter. Continue with network settings for the

RCU.

No page is shown when entering the RCU IP address

in the web browser:

• Start”Netbitercong”andchecktheRCUIPaddress.

If you must select the heat pump that you have:

It means that the RCU does not have any contact with the

heat pump.

• CheckthatyouhaveactivatedRCUintheheatpump.

• CheckthattheLED”SerialLink”ontheRCUashesif

any value is changed on the heat pump. If it is not lit

there is no communication between the RCU and the

heat pump. Check the cable and any joins. Restart the

heat pump.

The RCU does not respond to SMS

• ThelampontheGSMmodemashesat3sintervals

when it has a connection with the GSM network. If

the lamp ﬂashes at one second intervals there is no

connection. Check that the SIM card is correctly in-

serted, try moving the antenna to a better location,

check that no PIN code is required to use the subscrip-

tion.

• CheckthesettingsforSMSintheRCU.Refertothe

section “Modem” and ”Users”.

If the RCU is to be connected directly to a

computer a crossover network cable must

be used!

NOTE!

8RCU 10/20

Installation

Assembly

Stick the product label securely to the cover. The label can

be placed in any orientation, depending on the location of

the unit.

Open the plastic cover by separating its two halves.

The RCU is placed outside the heat pump and its best loca-

tion is mounted on a wall.

Connect the communication cable in accordance with the

appropriate product description. Then continue with the

instructions under the heading “Final installation”.

FIGHTER 360P

Open the centre front cover. Connect the supplied black

communication cable to the heat pump’s modular connec-

tor (106) on the CPU card (34). Route the communication

cable (105) down to the area at the bottom of the heat

pump. Use the supplied connector to connect the commu-

nication cable from the RCU.

The CPU card in FIGHTER 360P must have version number

2.00 or higher for communications to work.

1 3

0 4

1 3

0 4

Här är pluggen (61)

bortskruvad. Används i

MAV Extra shunt.

LEK

101

100

102

3229 1

60 69

105

FIGHTER 11XX

Connect the black communication cable to the heat

pump’s modular connector (106) located on the CPU card

(34). Use the supplied connector and cable, plugged in the

CPU card’s (34) modular connector ﬁrst, to position the

connection on the outside.

The CPU card in FIGHTER11XX must have version number

1.03 or higher for communications to work.

Installation

106

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nibe Adapter Handbücher

Nibe

Nibe Contura Connect Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung