Nidec M600-M70X Montageanleitung

1 0478-0030-02

1 Safety information

2 Introduction

This document covers through-panel mounting instructions for Unidrive

M600 / M70X, F300, H300, E200 & E300 Size 6 drives. The standard

drive is rated to IP20 pollution degree 2 (dry, non-conductive

contamination only, NEMA 1). However, it is possible to configure the

drive to achieve IP65 rating (NEMA 12) at the rear of the heatsink for

through-panel mounting.

The following items are supplied in the kit bag:

Table 2-1 Contents of kit box (CT Part Number: 3470-0055-00)

The following items are included in the kit boxes 3470-0054 and

3470-0037, either of which can be supplied with the drive.

Table 2-2 Additional items provided

The following items are not included in the kit box, however they

are required to complete the installation.

Table 2-3 Additional items required

3 Instructions

3.1 Preparing for installation

Figure 3-1 Installing the gasket

1. Install the through panel mounting gasket onto the drive with the kit

provided as shown (1).

Figure 3-2 Frame 6 drive and assembled gasket

2. Drive and assembled gasket (2).

Unidrive M600-M70X, F300, H300, E200 & E300

Size 6 Through-panel Mounting Installation Sheet

Follow the instructions

The mechanical and electrical installation instructions must

be adhered to. Any questions or doubt should be referred to

the supplier of the equipment. It is the responsibility of the

owner or user to ensure that the installation of the drive and

any external option unit, and the way in which they are

operated and maintained, comply with the requirements of

the Health and Safety at Work Act in the United Kingdom or

applicable legislation and regulations and codes of practice in

the country in which the equipment is used.

Competence of the installer

The drive must be installed by professional assemblers who

are familiar with the requirements for safety and EMC. The

assembler is responsible for ensuring that the end product or

system complies with all the relevant laws in the country

where it is to be used.

Description Image Qty

Through panel mounting gasket x 1

Through panel securing brackets x 3

Through panel mounting

instructions sheet x 1

Description Image Qty

Frame 6 mounting brackets x 2

Description Image Qty

Suitable M6 fastener 6

Suitable M5 fastener 6

WARNING

20478-0030-02

3.2 Preparing the backplate

Figure 3-3 Backplate mounting detail

Prepare the backplate in accordance with the mounting dimensions shown in Figure 3-3.

3.3 Installing the drive

Figure 3-4 Installing the lower mounting bracket

Loosely secure the lower mounting bracket to the mounting plate, using

three M6 fasteners as shown in Figure 3-4. This will allow small

movement of the bracket when securing the upper mounting bracket.

Figure 3-5 Inserting the drive through the backplate

Insert the drive through the cut-out in the mounting plate, and engage

the drive chassis mounting slots on the lower mounting bracket ensuring

that the drive is supported at all times until secured firmly.

3 0478-0030-02

Figure 3-6 Securing the upper mounting bracket

Locate the upper mounting bracket into the drive chassis upper

mounting slots and secure the drive to the mounting bracket using M6

fasteners. Make sure the M6 fasteners on the lower mounting bracket

are fully secured before proceeding further. Max Torque 2.5 N m (22 lb

in).

Figure 3-7 Installing the through panel mounting brackets

Install the through panel securing brackets (x3) into the drive chassis,

and secure them to the backplate using suitable M5 fasteners.

Dieses Handbuch passt für folgende Modelle

Andere Nidec Gleichstromantrieb Handbücher

Nidec

Nidec Unidrive M600 Leitfaden

Nidec

Nidec HVAC Drive H300 Bedienungsanleitung

Nidec

Nidec Unidrive M100 Bedienungs- und Wartungsanleitung

Nidec

Nidec Answer Drives 1000 Series Betriebsanleitung

Nidec

Nidec LEROY-SOMER Powerdrive MD2 Kurzanleitung

Nidec

Nidec HVAC Drive H300 Montageanleitung

Nidec

Nidec NE200 Series Bedienungsanleitung

Nidec

Nidec COMMANDER S100 Bedienungsanleitung

Nidec

Nidec RINDCODE NRX Series Bedienungsanleitung

Nidec

Nidec COMMANDER S100 Bedienungsanleitung

Nidec

Nidec LEROY-SOMER POWERDRIVE MD2R Series Bedienungsanleitung

Nidec

Nidec E300 Series Leitfaden

Nidec

Nidec LEROY-SOMER ORTHOBLOC 3000 Bedienungsanleitung

Nidec

Nidec NE200 Series Bedienungsanleitung

Nidec

Nidec DFS Series Bedienungsanleitung

Nidec

Nidec F600 Bedienungsanleitung

Nidec

Nidec Unidrive M201 Bedienungsanleitung

Nidec

Nidec Commander C200 Bedienungsanleitung

Nidec

Nidec AD1000 Bedienungsanleitung

Nidec

Nidec AD3000 Gebrauchs- und Pflegehandbuch

Nidec

Nidec LEROY-SOMER Bedienungsanleitung

Nidec

Nidec HVAC Drive H300 Bedienungsanleitung

Nidec

Nidec Unidrive M100 Montageanleitung

Nidec

Nidec LEROY-SOMER Commander ID30 Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung