Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8 IF Bedienungsanleitung

使用説明書

(P. 2–13)

Instruction Manual

(PP. 14–21)

Bedienungsanleitung

(S. 22–29)

Manuel d'utilisation

(P. 30–37)

Manual de instrucciones (PP. 38–45)

Manuale di istruzioni

(PP. 46–53)

(P. 54–61)

(P. 62–69)

AF-S Zoom-Nikkor

ED 70–200mm

f/2.8G IF

AF-S Zoom-Nikkor

ED 70–200mm

f/2.8 IF

NORMAL

ACTIVE

OFF

M/A M

FULL ∞2.5m

Nomenclature

1Lens hood

2Lens hood lock release button

3Lens hood attachment index

4Lens hood setting index

5Lens hood mounting index

6Distance scale

7Distance index line

8Focus ring

9Zoom ring

!Focal length scale

"Focal length scale index line

#Tripod collar ring rotating index

$Position indexes (90˚)

%Tripod collar ring

&Mounting index

(Lens mount rubber gasket

)CPU contacts

~Tripod collar mounting foot

+Tripod collar lock screw

,Tripod collar

-Tripod collar lock release lever

.Tripod collar ring fastening screw

/Vibration reduction mode switch

:Vibration reduction ON/OFF switch

;Focusing limit switch

<Focus mode switch

=Focus lock button

Usable cameras and available functions

There may be some restrictions or limitation for available functions. Refer to your

camera’s instruction manual for details.

Cameras Vibration Autofocus

Exposure mode

reduction P*1SAM

F6, F5, F100, F80-Series/N80-Series*,

F75-Series/N75-Series*,

F65-Series/N65-Series*,

D2-Series, D1-Series, D100, D70

Pronea 600i/6i*, Pronea S*2

F4-Series, F90X/N90s*,

F90-Series/N90*, F70-Series/N70*

F55-Series/N55-Series*,

F60-Series/N60*,

F50-Series/N50, F-401x/N5005*,

F-401s/N4004s*, F-401/N4004*

F-801s/N8008s*, F-801/N8008*,

F-601M/N6000*

Other Nikon cameras*3

*Sold exclusively in the USA. ○: Possible ×:Impossible

*1P includes AUTO (General-Purpose Program) and Vari-Program System

*2Manual (M) is not available

*3This lens is not compatible with the F3AF

○○○○○○

×○○○○○

×○○○××

××○○○○

××○○××

××

××××

Introduction

Thank you for purchasing the AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF lens.

This is a high-performance zoom lens featuring special Vibration Reduction (VR) and

high-speed Internal Focusing (IF) mechanisms. It also employs a Silent (S) Wave Motor

to drive the focusing mechanism.

Major features

●With this lens, you can take pictures at shutter speeds approx. 3 stops slower than you

ordinarily could without using a VR lens, expanding the range of usable shutter speed

options and making telephoto shooting much easier without a tripod.

●Two vibration reduction modes are available: (1) the NORMAL mode for reducing

camera shake, and. (2) the ACTIVE mode for reducing camera shake when taking

pictures from a moving vehicle.

●Panning is also possible, as the lens automatically distinguishes panning from camera

shake and vibration reduction works effectively (in the NORMAL mode).

●Autofocus (A) or manual (M) mode can easily be selected with the focus mode switch.

●Various functions provided: (1) autofocusing with manual override providing an

instant change from autofocusing to manual focusing, (2) focusing limit switch to limit

AF operation within a certain shooting distance, (3) focus lock button to lock focus on

the lens, etc. (Refer to “Focusing.”).

●More accurate exposure control is possible when this is mounted on a Nikon camera

having 3D Matrix Metering capability, because subject distance information is

transferred from the lens to the camera body.

●The use of five ED (extra-low dispersion) lens elements ensures sharp pictures

virtually free of color fringing. Also, by utilizing a 9-blade diaphragm that produces a

nearly circular aperture, out-of-focus images in front of or behind the subject are

rendered as pleasing blurs.

●Closest focusing distance of 1.5m (4.9 ft.) (AF) and 1.4m (4.6 ft.) (MF) are provided.

●Detachable tripod collar is provided and can be removed when not needed.

Important!

●Be careful not to soil or damage the CPU contacts.

●AF-I/AF-S Teleconverters TC-14E/TC-14EII/TC-17EII/TC-20E/TC-20EII are usable. Even

when a teleconverter is attached, both vibration reduction and autofocus functions work

properly.

●When mounted on Nikon digital cameras (Nikon DX format) D2-Series, D1-Series,

D100 and D70, the lens’ picture angle becomes 22˚50’–8˚ and its 35mm equivalent

focal length range is approx. 105–300mm.

●If the lens mount rubber gasket is damaged, be sure to visit the nearest Nikon

authorized dealer or service center for repair.

Lens’ focus mode

Cameras M/A M

Autofocus with manual

Manual focus

priority

(Focus assist is available.)

Manual focus

(Focus assist is available.)

Other Nikon AF cameras

Manual focus

(except the F3AF, F-601/N6006*)

(Focus assist is available.)

Focusing

Set your camera’s focus mode selector according to this chart:

F6, F5, F4-Series, F100, F90X/N90s*,

F90-Series/N90*, F80-Series/

N80-Series*, F75-Series/

N75-Series*, F70-Series/N70*,

F65-Series/N65-Series*,

Pronea 600i/6i*, Pronea S, D2-Series,

D1-Series, D100, D70

*Sold exclusively in the U.S.A.

Autofocus with manual override (M/A mode)

1Set the focus mode switch to M/A. (Fig. D)

2Autofocus is provided, but you can manually override the focus by operating the

separate focus ring while lightly depressing the shutter release button or AF start

(AF-ON) button on the camera body of cameras so equipped.

3To cancel manual override, remove your finger from the shutter release button or the

AF start button.

To limit the range of autofocus (with M/A mode compatible cameras only)

With AF operation, if the subject is always more than 2.5m (8.2 ft.) away, set the

focusing limit switch to “∞–2.5m” to reduce focusing time. If the subject is 2.5m (8.2 ft.)

or closer, set it to “FULL” (Fig. E).

Focus lock (with M/A mode compatible cameras only)

With autofocus operation, focus is locked while pressing the focus lock button. (Fig. C)

・The AF-Lock function can be engaged on either the camera and lens. Focus is locked while

either of these buttons is pressed.

Vibration reduction mode

The following cameras are usable:

35mm SLR cameras: F6, F5, F100, F80-Series/N80-Series, F75-Series/N75-Series,

F65-Series/N65-Series

Digital SLRs cameras: D2-Series, D1-Series, D100, D70

・When using the lens with cameras other than those listed above, set the vibration reduction

mode switch to OFF to cancel the vibration reduction mode. With the Pronea 600i/6i

camera, in particular, battery power may become depleted quickly if this switch is left ON.

Camera’s focus mode

Basic concept of vibration reduction

Setting the vibration reduction ON/OFF switch (Fig. F)

ON: Vibration is reduced while the shutter release button is lightly pressed and also at

the instant the shutter is released. Because vibration is reduced in the viewfinder,

auto/manual focusing and exact framing of the subject are easier.

OFF: Vibration is not reduced.

Setting the vibration reduction mode switch (Fig. G)

First, set the vibration reduction ON/OFF switch ON, then select the following mode:

NORMAL:The vibration reduction mechanism primarily reduces camera shake, making

smooth panning shots possible.

ACTIVE: The vibration reduction mechanism reduces camera shake when taking

pictures and those from a moving vehicle. In this mode, the lens does not

automatically distinguish panning from camera shake.

Strength of vibrations

Set the vibration reduction mode switch to “NORMAL”.

Panning shots

Camera shake

Set the vibration reduction mode switch to “ACTIVE”.

Camera shake

when taking

pictures from a

moving vehicle

Number of vibrations

When taking pictures

When taking panning shots

When taking pictures from

a moving vehicle

Set the vibration reduction mode switch to

either “NORMAL” or “ACTIVE”.

Set the vibration reduction mode switch

to “NORMAL”.

Set the vibration reduction mode switch

to “ACTIVE”.

Notes on using vibration reduction

●Wait until the image in the viewfinder stops vibrating before fully depressing the

shutter release button after you have lightly pressed the shutter release button.

●

When taking panning shots, be sure to set the vibration reduction mode switch to NORMAL.

If you move the camera in a wide arc when panning, vibration in the direction of that

movement is not affected. For example, if you pan the camera horizontally, only

vibration in the vertical direction is reduced, making smooth pans much easier.

●Due to the characteristics of the vibration reduction mechanism, the image in the

viewfinder may become blurred after releasing the shutter.

●Do not turn the camera power OFF while the vibration reduction mode is in operation.

Otherwise, the lens may emit a chattering noise if the camera is shaken. This is not a

malfunction. Turn the camera power ON again to correct this.

●If the lens is removed from the camera while the vibration reduction mode is in

operation, the same thing may happen as stated above. Mount the lens and press the

shutter release button halfway to eliminate the chattering noise.

●With F80-Series/N80-Series, F75-Series/N75-Series, F65-Series/N65-Series, D100

and D70 cameras, vibration reduction does not work while the flash is recycling.

●When the lens is mounted on a tripod, set the vibration reduction ON/OFF switch to

OFF. However, set the switch to ON when using a tripod without securing the tripod

head, or when using a monopod.

●If you set the AF start (AF-ON) button to ON on the body of cameras so equipped,

vibration reduction does not operate.

Focusing, zooming, and depth of field

First turn the zoom ring until the desired composition is framed in the viewfinder before

focusing. If your camera has a depth of field preview (stop-down) button or lever, depth

of field can be observed while looking through the camera viewfinder.

Setting the aperture

Because this lens does not have an aperture ring, you must set the aperture on the camera.

Taking flash pictures with cameras having built-in flash

When using the following cameras, check the focal length and shooting distance before

taking flash pictures to prevent vignetting since the light emitted from the flash may be

obstructed by the lens barrel.

Cameras Usable focal length / Shooting distance

F75-Series/N75-Series* 70mm / 3m (9.8 ft.) or greater

80mm or longer / No restriction

F70-Series/N70* 80mm / 1.8m (5.9 ft.) or greater

105mm or longer / No restriction

F65-Series/N65-Series*, F60-Series/N60*, 105mm / 1.8m (5.9 ft.) or greater

F55-Series/N55-Series* 135mm or longer / No restriction

F50-Series/N50* 105mm / 4m (13.1 ft.) or greater

135mm or longer / No restriction

Pronea 600i/6i* 80mm / 2.5m (8.2 ft.) or greater

105mm or longer / No restriction

Pronea S 135mm / 4m (13.1 ft.) or greater

200mm / No restriction

F-401x/N5005*, F-401s/N4004s*, 135mm or longer / No restriction

F-401/N4004*

○



Screen

Camera

F5+DP-30

◎

◎ ―

―

― ◎ ― ◎

G2 G3

BCE

EC-B

EC-E FJKLMPU

F4+DP-20

F4+DA-20

F5+DA-30

◎

―

――

―

◎◎

○



○

（–0.5）

○

（+0.5）

◎

○

◎

― ― ― ― ― ―◎ ◎ ◎◎ ◎

◎

Recommended focusing screens

Various interchangeable focusing screens are available for certain Nikon SLR cameras to

suit any picture-taking situation. The ones recommended for use with this lens are:

◎： Excellent focusing

○： Acceptable focusing

Slight vignetting or moiré patterns appear in the viewfinder, but not on the film.

―： Not available.

()： Indicates degree of exposure compensation needed (Center-Weighted metering only). For F6 cameras,

compensate by selecting "Other screen” in Custom Setting “b6: Screen comp.” and setting the EV level to

-2.0 to +2.0 in 0.5 EV steps. When using screens other than type B or E, “Other screen” must be selected

even when the required compensation value is “0” (no compensation required). For F5 cameras,

compensate using Custom Setting #18 on the camera body. For F4-Series cameras, compensate using

the Exposure Compensation Dial for the focusing screen.

See instruction manual of the camera body for more details.

Blank box means not applicable. Since type M screen can be used for both macrophotography at a 1:1

magnification ratio and for photomicrography, it has different applications than other screens.

•When using the B and E focusing screens in cameras other than those listed above, refer to the columns for

the B and E screens.

*Sold exclusively in the U.S.A.

Using a tripod

When using a tripod, attach it to the lens’ tripod collar instead of the camera.

CAUTION

When using a tripod, be sure to fully tighten the tripod collar lock screw, otherwise

the lens may fall off the tripod accidentally and cause bodily injury.

Attaching the tripod

•Insert the tripod collar mounting foot 1into the tripod collar, then fully tighten the

tripod collar lock screw 2. (Fig. H)

•Loosen the tripod collar ring fastening screw 1. Depending on the camera’ s position

(vertical or horizontal) 2, turn the lens to an appropriate position index on the tripod

collar ring by aligning the tripod collar ring rotating index on the lens, then tighten the

screw 3. (Fig. J)

Detaching the tripod

•Fully loosen the tripod collar lock screw 1. While holding down the tripod collar lock

release lever 2, slide the tripod collar mounting foot 3to detach. (Fig. I)

Using bayonet hood HB-29

Attaching the hood

Align the lens hood attachment index ( ) on the lens hood with the hood mounting

index on the lens, and turn the hood counterclockwise (as viewed from the camera side)

until it click stops. (Fig. A)

・Make sure that the lens hood mounting index aligns with the lens hood setting index ( ).

・If the lens hood is not correctly attached, vignetting can occur.

・To facilitate attachment or removal of the hood, hold it by its base rather than its outer edge.

・To store the lens hood, attach it in the reverse position.

Detaching the hood

While holding down the lens hood lock release button, turn the hood clockwise (as viewed

from the camera side) to detach. (Fig. B)

Lens care

●Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a soft,

clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner.

Wipe in a circular motion from center to outer edge, taking care not to leave traces or

touch other parts of the lens.

●Never use thinner or benzene to clean the lens as this might damage it, result in a fire,

or cause health problems.

●To protect the front lens element, an NC filter is recommended at all times. A lens

hood also helps protect the front of the lens.

●When storing the lens in its lens case, attach both front and rear caps.

Inhaltsverzeichnis

Andere Nikon Kameraobjektiv Handbücher

Nikon

Nikon Coolpix W100 Bedienungsanleitung

Nikon

Nikon AF-S DX VR Zoom-Nikkor 55-200mm f/4-5.6G... Bedienungsanleitung

Nikon

Nikon NIKKOR Z 24-200mm f/4-6.3 VR Bedienungsanleitung

Nikon

Nikon AF-S NIKKOR 24-120mm f/4G ED VR Bedienungsanleitung

Nikon

Nikon AF-I Nikkor ED 600mm f/4D IF Bedienungsanleitung

Nikon

Nikon Lenses AF Fisheye-Nikkor 16mm f/2.8 Bedienungsanleitung

Nikon

Nikon AF-S DX Zoom-Nikkor 18-55mm f/3.5-5.6G ED II Bedienungsanleitung

Nikon

Nikon AF Nikkor 24-85 Betriebsanleitung

Nikon

Nikon AF-S NIKKOR 24-70mm f/2.8G ED Bedienungsanleitung

Nikon

Nikon ED 17-55mm f/2.8G IF Betriebsanleitung

Nikon

Nikon AF-S Nikkor 300mm f/4D IF-ED Bedienungsanleitung

Nikon

Nikon AF Zoom-Nikkor 28-80mm f/3.3-5.6G (2.9x) Bedienungsanleitung

Nikon

Nikon NIKKOR Z 85mm f/1.8 S Bedienungsanleitung

Nikon

Nikon JAA801DA Bedienungsanleitung

Nikon

Nikon AF-S DX Zoom-Nikkor 17-55mm f/2.8G IF-ED Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 28-70mm f/2.8D IF-ED (2.5x) Bedienungsanleitung

Nikon

Nikon AF-S NIKKOR 400mm f/2.8G ED VR Bedienungsanleitung

Nikon

Nikon AF Zoom-Nikkor 75-300mm f/4.5-5.6 Bedienungsanleitung

Nikon

Nikon Nikkor ED 300mm f/2.8 IF Bedienungsanleitung

Nikon

Nikon AF-S NIKKOR 24-70mm f/2.8G ED Bedienungsanleitung

Nikon

Nikon AF-S NIKKOR Bedienungsanleitung

Nikon

Nikon AF-S NIKKOR 24-85mm f/3.5-4.5G ED VR Bedienungsanleitung

Nikon

Nikon AF-S DX Nikkor ED 55-200/4-5.6G Betriebsanleitung

Nikon

Nikon NIKKOR Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung