Ninja Kitchen ULTRA PREP PS100 Bedienungsanleitung

ULTRA PREP™

PS100

Series

ninjakitchen.com

OWNER’S GUIDE

1ninjakitchen.com

CONTENTS

THANK YOU

for purchasing the Ninja® Ultra Prep™

Registration � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �1

Important Safeguards� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Getting Started � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4

Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6

Assembling & Using the Jar� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

Care & Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the Power Pod Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . 8

Storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Resetting the Motor Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Ordering Replacement Parts� � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Helpful Tips� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

PLEASE READ CAREFULLY AND

KEEP FOR FUTURE REFERENCE�

THIS BOOK COVERS MODEL NUMBER:

PS100

PS101

TECHNICAL SPECIFICATIONS

Voltage: 120V, 60Hz

Watts: 700W

Pitcher Capacity: 48 oz. (6 cups, 1.5 L)

TIP: You can ﬁnd the model and serial

numbers on the QR code located on

the bottom of the power pod.

RECORD THIS INFORMATION

Model Number: ��

Serial Number: ��

Date of Purchase: ��

(Keep receipt)

Store of Purchase: ��

registeryourninja.com

Scan QR code using mobile device

2 3

ninjakitchen.com

1DO NOT try to place the blade onto

the power pod and then into the Jar.

ALWAYS assemble the blade inside the jar.

2Remove utensils prior to processing.

Failure to remove may cause the jar to be

damaged or to shatter which may cause

personal injury.

3The blades are sharp, not locked in place,

and removable. Handle with care. When

handling the blades, always hold them by

the shaft. Failure to do so will result in a

risk of laceration.

4Make sure to carefully remove the splash

guard lid and blade assembly, holding it

by the shaft, before emptying contents of

the jar. Failure to do so will result in a risk

of laceration.

5DO NOT place ingredients into the jar

without ﬁrst installing the blade assembly.

6 DO NOT operate the appliance without the

splash guard lid in place.

7DO NOT blend hot liquids, as doing so

may cause excessive pressure buildup,

resulting in a risk of the user being burned.

8To protect against electrical shock,

DO NOT submerge the appliance or

allow the power cord to come into

contact with water or any other liquid.

9DO NOT allow the appliance to be used

by children. Close supervision is necessary

when used near children. This is not a toy.

10 NEVER leave an appliance unattended

when inuse.

11 Appliance accessories are not intended to

be used in the microwave, as it may result

in damage to the accessories.

12 Remove the power pod from the

appliance and unplug the power cord

from the electrical outlet when not in use,

before assembling or disassembling parts,

and before cleaning. To unplug, grasp the

plug and pull from the electrical outlet.

NEVER pull from the power cord.

13 DO NOT abuse the power cord. NEVER

carry the power pod by the power cord

or yank it to disconnect from electrical

outlet; instead grasp the plug and pull

to disconnect.

14 DO NOT operate any appliance with

a damaged cord or plug or after the

appliance malfunctions or has been

dropped or damaged in any manner. This

appliance has no serviceable parts. Return

the appliance to SharkNinja Operating LLC

for examination, repair, or adjustment.

15 DO NOT let the power cord hang over the

edges of tables or counters or touch hot

surfaces such as the stove.

16 ALWAYS use appliance on a clean, dry,

level surface.

17 Keep hands, hair, clothing, and utensils

out of container while processing to

reduce the risk of severe injury to persons

or damage to the appliance. A scraper

may be used, but only when the appliance

is not running.

18 Avoid contact with moving parts.

19 DO NOT attempt to sharpen blades.

20 DO NOT use the appliance if blades are

bent or damaged.

21 DO NOT expose jar to extreme

temperature changes.

22 DO NOT use jar if cracked or chipped.

23 DO NOT operate the appliance on or

near any hot surfaces (such as on a gas

or electric burner or in a heated oven).

24 The use of accessory attachments,

including canning jars, is not recommended

by the manufacturer and may cause ﬁre,

electrical shock, or risk of personal injury.

25 DO NOT remove the power pod before the

blades have stopped turning.

26 DO NOT overﬁll.

27 DO NOT operate the appliance empty.

28 DO NOT try to defeat the interlock

mechanism. Make sure the blades

are properly installed before operating

the appliance.

29 Immediately release the Power Pod

control button on the power pod if the

appliance malfunctions during use.

30 DO NOT operate the appliance for more

than 15 seconds.

31 If the appliance overheats, a thermal

switch will activate and shut o the motor.

To reset, unplug the appliance and let it

cool down for approximately 10 minutes

before using again.

32 This product is intended for household

use only. DO NOT use this appliance for

anything other than its intended use.

DO NOT use outdoors.

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

To reduce the risk of electric shock, this appliance has a polarized plug

(one blade is wider than the other). This plug will ﬁt into a polarized outlet

only one way. If the plug does not ﬁt fully into the outlet, reverse the plug.

If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet.

DO NOT modify the plug in any way. Extension cords are not recommended

for use with this product.

4 5

ninjakitchen.com

GETTING STARTED

WELCOME

Congratulations on

your purchase. Use this

Owner’s Guide to learn

about the great features

of your Ninja®Ultra Prep™.

From assembly to use to

maintenance, you will ﬁnd

it all in here.

PARTS

APower Pod

(power cord not shown)

BSplash Guard Lid

CJar with

Non-Slip Base

DHigh-Speed Blade

ETotal Crushing® &

Power Chopping Blade

FDough Blade

GPower Pod

Cleaning Brush

Power Pod

Control Button

6 7

ninjakitchen.com

BEFORE FIRST USE ASSEMBLING & USING THE JAR

1Remove all packaging material and labels from the

appliance. Separate all parts.

2Wash the jar, splash guard lid, and blades in warm, soapy

water. When washing the blades, use a dishwashing utensil

with a handle to avoid direct hand contact with blades.

3Handle the blades with care to avoid contact with sharp

edges. Rinse and air-dry thoroughly.

4The jar, splash guard lid, and blades are all dishwasher safe.

It is recommended that the jar, splash guard lid, and blades

be placed on the top rack. Ensure blades are removed

from the jar before placing in the dishwasher.

5Wipe the Power Pod clean with a damp cloth.

1Review important safeguards on pages

2-3 before proceeding to step 2.

2Place the jar on a clean, dry, level surface.

3Holding the blade by the shaft, carefully

lower it onto the spindle pin inside the

jar (Fig. 1).

4Add the ingredients to be processed

into the jar.

5Place splash guard lid on the jar (Fig. 2).

6Place the power pod on top of the

splash guard lid, making sure it is securely

in place (Fig. 3).

7To start the appliance, plug the power

cord into an electrical outlet, securely hold

the power pod, and press the Power Pod

control button located on the top of the

power pod. Continue to hold jar and power

pod ﬁrmly while operating (Fig. 4).

Fig. 2

Shaft

Fig. 1

8To stop the appliance, stop pressing the

Power Pod control button.

9Make sure the blade has stopped

completely before removing the power pod.

10 If ingredients stick to the sides of the jar,

stop the appliance, remove the power pod

and splash guard lid, then use a spatula to

scrape ingredients down toward the blades.

11 To remove ingredients with a thinner

consistency, pour them through the

spout on the splash guard lid. To remove

contents with thicker consistencies, ﬁrst

take o the splash guard lid. Carefully

remove the blade and set it aside before

emptying contents from jar.

Fig. 3

Fig. 4

NOTE: Be careful not

to over-process. Use

repeated short pulses

until your desired

consistency is reached.

ninjakitchen.com

CARE & MAINTENANCE TROUBLESHOOTING GUIDE

STORING

1Store the unit upright with the Total

Crushing® & Power Chopping Blade

inside the jar. Place the splash guard lid

on top of the jar, and the power pod on

top of the splash guard lid. Store the

High-Speed Blade inside the storage

box, and the dough blade in a drawer.

RESETTING THE MOTOR

THERMOSTAT

The unit features a unique safety system

that prevents damage to the unit’s

motor and drive system should you

inadvertently overload it. If the appliance

is overloaded, the motor will stop.

To reset the appliance, follow the

resetting procedure below:

1Unplug the appliance from the

electrical outlet.

2Remove the power pod and splash

guard lid and empty the container to

ensure no ingredients are jamming the

blade assembly.

3Allow the appliance to cool for

approximately 10 minutes.

4Replace the splash guard lid and

power pod and plug the appliance

into the electrical outlet.

5Proceed to use the appliance as

before, making sure not to exceed the

recommended maximum capacities.

CLEANING

1Separate all parts.

2Hand-Washing: Wash the jar, splash

guard lid, and blades in warm, soapy

water. When washing the blades, use

a dishwashing utensil with a handle to

avoid direct hand contact with blades.

Handle the blades with care to avoid

contact with sharp edges. Rinse and

air-dry thoroughly.

Dishwasher: The jar, splash guard lid,

and blades are all dishwasher safe. It is

recommended that the blades be placed

on the top rack. Ensure the blades are

removed from the jar before placing in

the dishwasher.

3Wipe the Power Pod clean with a

damp cloth.

USING THE POWER POD

CLEANING BRUSH

1Use the bristled end of the power pod

cleaning brush to gently remove any

debris from the base of the power pod.

2Carefully use the pointed end of the

power pod cleaning brush to remove

stuck-on debris.

3Gently rinse the power pod cleaning

brush after use and let air-dry.

NOTE: do not use the power pod

cleaning brush to clean any part of the

Ninja Ultra Prep™, except for the base of

the power pod.

ISSUE POSSIBLE REASONS & SOLUTIONS

Motor does not start

or blade assembly

does not rotate.

Check that the bottom of power pod is clean and no ingredients

are blocking connection when attaching the splash guard.

There are too many ingredients in the jar.

The unit has overheated or overloaded. Unplug and wait

approximately 10 minutes before using again.

Make sure the splash guard lid is securely attached to jar.

Make sure the power pod is securely seated on splash guard lid.

Check that the plug is securely inserted into the electrical outlet.

Check fuse or breaker in your home. Replace fuse/reset breaker.

Ingredients are

unevenly chopped.

Either you are chopping too many ingredients at one time,

or the pieces are not small enough. Try cutting the ingredients

into smaller pieces of even size and processing smaller

amounts per batch.

Ingredients are

chopped too ﬁne

or are too watery.

The ingredients have been over-processed. Use brief pulses or

process for a shorter time. Let blade assembly stop

completely between pulses.

Ingredients collect

on splash guard lid

or on the sides of

the jar.

You may be processing too many ingredients. Turn the unit

o. When the blade assembly comes to a complete stop,

take o the power pod and splash guard lid, and remove

some of the ingredients.

You cannot create

snow from solid ice.

Do not use ice that has been sitting out or has started to melt.

Use ice straight from the freezer. Start by using short pulses

to break up large pieces, then continue processing until snow

is achieved.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, visit ninjakitchen.com

or contact Customer Service at 1-877-646-5288.

10 11

ninjakitchen.com

ONE (1) YEAR

LIMITED WARRANTY

HELPFUL TIPS

SOY BEAN DIP RECIPE

The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja

Operating LLC. Warranty coverage applies to the original owner and to the original product only

and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a

period of 1 year from the date of purchase when it is used under normal household conditions

and maintained according to the requirements outlined in this Owner’s Guide, subject to the

following conditions and exclusions.

What is covered by my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole

discretion, will be repaired or replaced for up to 1 year from the original purchase date.

2. In the rare event that a replacement unit is issued, the warranty coverage ends 6 months after

the receipt date of the replacement unit or the remainder of the existing warranty, whichever

is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of

equal or greater value.

What is not covered by my warranty?

Our Customer Service/Product Specialists are available to provide all the warranty service

options available to you, including the possibility of upgrading to our VIP Warranty Service

Options for select product categories.

1. Normal wear and tear of wearable parts (including all blending vessels, lids, blade assemblies,

and power pod) that require regular maintenance and/or replacement to ensure the proper

functioning of your unit are not covered by this warranty.

2. Any unit that has been tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the customer to send the unit to us for repair or

replacement. A fee of $19.95 for return shipping costs will be charged at the time of return

shipment of the repaired or replacement unit.

4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in

transit.

5. Consequential and incidental damages.

6. Defects caused by or resulting from damages from shipping or from repairs, service, or

alteration to the product or any of its parts that have been performed by a repair person not

authorized by SharkNinja.

7. Products purchased, used, or operated outside of North America.

Problems with your unit/How to get service:

If your appliance fails to operate properly while in use under normal household conditions

within the warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our

Customer Service and Product Specialists are also available at 1-877-646-5288 to assist with

product support and warranty service options.

How to initiate a warranty claim:

You can call 1-877-646-5288 to have a Customer Service Specialist assist you. Please note, you

must call 1-877-646-5288 to initiate a warranty claim. Return and Packing Instruction information

will be provided at that time.

For Customer Service hours, visit ninjakitchen.com.

Replacement parts are available for purchase at ninjaaccessories.com. For more information on

what are classiﬁed as wearable and non-wearable parts, visit ninjakitchen.com/warranty.

This warranty gives you speciﬁc legal rights, and you may also have other rights that vary from

state to state or province to province.

Some states or provinces do not permit the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.

• For coarse chopping, use short, quick

pulses and monitor food texture.

• For mincing, chopping, and pureeing,

increase the length of pulses.

• To crush ice into snow, start by using

short pulses to break up large pieces,

then continue processing until snow

is achieved.

• The Total Crushing® & Power

Chopping Blade can be used

to chop meat, ﬁsh, vegetables,

cheese, and more.

• For ﬁner purees, dressings,

and extractions, use the

High-Speed Blade.

• Cut larger ingredients into smaller

pieces to better ﬁt them in the

Ninja® Ultra Prep™. When chopping

harder foods like meat and cheese,

cut them into 1-inch cubes.

Prep: 10 minutes

Blade: High-Speed Blade

Pulsing time: 15 seconds

DIRECTIONS

1Clean and dry jar and blade.

2Place the High-Speed Blade into the

Jar, then add soy beans.

3Pulse for 15 seconds.

INGREDIENTS

740g dry soy beans

12 13

ninjakitchen.com

NOTES

@ninjakitchen

SharkNinja Operating LLC

US: Needham, MA 02494

1-877-646-5288

ninjakitchen�com

Illustrations may dier from actual product. We are constantly striving to improve

our products, therefore the speciﬁcations contained herein are subject to change

withoutnotice.

NINJA is a registered trademark of SharkNinja Operating LLC.

ULTRA-PREP is a trademark of SharkNinja Operating LLC.

PS100Series�IB�MP�180531

PRINTED IN CHINA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ninja Kitchen Küchenmaschine Handbücher

ninja Kitchen

ninja Kitchen Foodi CB100EU Bedienungsanleitung

Beliebte Küchenmaschine Handbücher anderer Marken

INNOLIVING

INNOLIVING INN-727 Bedienungsanleitung

Berkel

Berkel C32 Bedienungsanleitung

Beko

Beko CHP5554W Bedienungsanleitung

KitchenAid

KitchenAid 5KFP0719 Bedienungsanleitung

QUIGG

QUIGG KM 2017Wi.20 Bedienungsanleitung

Lakeland

Lakeland PRESS AND CHOP 31557 Bedienungsanleitung

Bosch

Bosch MMR08 GB Series Bedienungsanleitung

HOFFEN

HOFFEN Chef Express T9532 Bedienungsanleitung

Garland

Garland 852 ZG Bedienungsanleitung

Robot Coupe

Robot Coupe CL50 Gourmet Bedienungsanleitung

SAPIRHOME

SAPIRHOME SP-1111-K Bedienungsanleitung

Moulinex

Moulinex DJ3051 Bedienungsanleitung

Bosch

Bosch MUM5 Bedienungsanleitung

cecotec

cecotec Mambo Touch Bedienungsanleitung

KitchenAid

KitchenAid 9KFC0516 Bedienungsanleitung

Black & Decker

Black & Decker hc 300 Montageanleitung

Gorenje

Gorenje SBR 1000 DV Bedienungsanleitung

Arzum

Arzum AR 1128 Bedienungsanleitung

ninja Kitchen ULTRA PREP PS100 Bedienungsanleitung

Beliebte Küchenmaschine Handbücher anderer Marken