Ninja Master Prep Professional QB1004NZ 30 Bedienungsanleitung

Master Prep™ Professional

QB1004NZ 30

OWNER’S GUIDE

QB1004NZ_30_IB_120626_2.indd 1 12-06-26 12:59 PM

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL

APPLIANCES, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR NINJA™ MASTER PREP™

PROFESSIONAL.

IMPORTANT: This appliance

can be used by children aged from

8 years and above and persons

with reduced physical, sensory

or mental capabilities or lack

of experience and knowledge if

they have been given supervision

or instruction concerning use of

the appliance in a safe way and

understand the hazards involved.

Children should be supervised to

ensure that they do not play with

the appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

1. Close supervision is necessary

when any appliance is used by or

near children.

2. To protect against electric shock,

DO NOT immerse cord, plug or

any part of the main unit in water

or any other liquids.

3. DO NOT let cord hang over edge

of table or counter, or touch hot

surfaces.

4. DO NOT operate the appliance

with a damaged plug or cord,

or if the unit has been dropped,

damaged or dropped in water. To

avoid the risk of electric shock,

do not disassemble or attempt to

repair the appliance on your own.

If the supply cord is damaged, it

must be replaced by a qualiﬁed

electrician in order to avoid a

hazard. Incorrect re-assembly or

repair can cause a risk of electrical

shock or injury to persons when

the appliance is usedt.

5. Unplug appliance from outlet

when not in use and before

cleaning.

6. DO NOT place on or near a hot

gas or electric burner.

7. The use of accessory

attachments, including canning

jars not recommended by the

manufacturer may cause ﬁre,

electrical shock or risk of personal

injury.

8. Extreme caution must be used

when moving an appliance

containing hot food, water or

other liquids.

QB1004NZ_30_IB_120626_2.indd 1 12-06-26 12:59 PM

23. DO NOT operate the appliance

empty.

24. If the appliance overheats, a

thermal switch will become

activated and shut off the motor.

To reset, unplug the appliance and

let it cool down for approximately

10 minutes before using again.

25. THIS PRODUCT IS INTENDED

FOR HOUSEHOLD USE ONLY.

Do not use this appliance for

anything other than its intended

use. Do not use outdoors.

WARNING: Extension

cords are not recommended for use

with this product.

SAVE THESE

INSTRUCTIONS

9. Use this appliance on a stable

work surface away from water.

10. DO NOT remove the motor head

before the chopping blades have

stopped turning.

11. CAUTION! Chopping blades are

sharp, handle with care. When

handling the chopping blades,

always hold by the plastic shaft.

12. DO NOT attempt to sharpen

blades.

13. DO NOT expose pitcher to

extreme temperature changes.

14. DO NOT use pitcher if it is cracked

or chipped.

15. DO NOT use the appliance if

chopping blades are bent or

damaged.

16. Avoid contact with moving parts

at all times. Keep hands, hair,

clothing as well as spatulas and

other utensils away from pitcher

during operation to prevent risk of

personal injury and/or damage to

the appliance.

17. Exercise extreme caution when

blending hot liquids.

18. Immediately release the On/Off

pulse button on the motor head

in the event that the appliance

malfunctions during use.

19. To reduce the risk of injury, NEVER

operate the appliance without the

splash guard in place; DO NOT try

to defeat the interlock mechanism;

make sure that the cutting blades

are properly assembled before

operating the appliance.

20. DO NOT use outdoors.

21. DO NOT use appliance for other

than intended use.

22. DO NOT operate the appliance for

more than 15 seconds.

QB1004NZ_30_IB_120626_2.indd 2 12-06-26 12:59 PM

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~, 50Hz.

Power: 500 Watts

Pitcher Capacities:

• 1.5 L (48 ounces) (6 cups)

• 1.2 L (40 ounces) (5 cups)

Bowl Capacity: 0.5 L (16 ounces) (2 cups)

Z854

SAA110120EA

QB1004NZ_30_IB_120626_2.indd 3 12-06-26 12:59 PM

Contents

Thank you for

purchasing

the Ninja™

Master Prep™

Professional.

Getting Started ...................................................................................6

Using the Master Prep™ Professional Pitchers .........................8

Using the Master Prep™ Professional Bowl ...............................10

Cleaning and Maintenance .............................................................12

Troubleshooting Guide ....................................................................12

QB1004NZ_30_IB_120626_2.indd 4 12-06-26 12:59 PM

Getting Started

i Master Prep™ Professional 40 oz. Pitcher

with Non-Slip Base

j Pitcher Storage Lid (x 2)

k Bowl Splash Guard

l Upper Blade

m Lower Blade

n Master Prep™ Professional Bowl with

Non-Slip Base

o Bowl Storage Lid

p Power Cord (not shown)

a On/Off Pulse Button

b Power Head

c Pouring Spout

d Pitcher Splash Guard

e Ninja™ 6-Blade

f Master Prep™ Professional 48 oz. Pitcher

with Non-Slip Base

g Spindle Pin

h Ninja™ 4-Blade

QB1004NZ_30_IB_120626_2.indd 5 12-06-26 12:59 PM

The Ninja™ Master Prep™ Professional is an indispensable kitchen tool that is perfect

for blending, chopping, mixing or pureeing when preparing your favorite recipes.

For best results, be sure to carefully read all the instructions contained in the manual

before using this appliance.

500 Watt Power Head

The 500 watt power head operates on 220-240V~, 50Hz. electrical power. NEVER

allow the power head to become wet when plugged into an electrical outlet.

W A R N I N G : The power head should never be immersed in water or any other liquid.

CAUTION: Make sure that the power head is unplugged from the electrical outlet and

that the blades have stopped turning before attaching or removing any accessory.

CAUTION: Blades are sharp! Use extreme caution when handling the blades.

Always hold them by the shaft. Do not attempt to sharpen blades.

IMPORTANT: Never run the appliance empty.

QB1004NZ_30_IB_120626_2.indd 6 12-06-26 12:59 PM

WARNING: DO NOT try to place the

blade onto the power head and then

into the Master Prep™ Professional

Pitcher.

Using the Master Prep™ Professional Pitchers

CAUTION: Blades are sharp! Use

extreme caution when handling the

blades. Always hold them by the shaft.

IMPORTANT: Never run the appliance

empty.

1 Place the Master Prep™ Professional

Pitcher on a clean, dry, level surface.

2 Holding the blade by the shaft, place it

onto the spindle pin inside the Master

Prep™ Professional Pitcher.

• Use the Ninja™ 6-Blade in the 1.5 L.

Pitcher. (ﬁg. 1)

• Use the Ninja™ 4-Blade in the 1.2 L.

Pitcher. (ﬁg. 2)

IMPORTANT: Place blade inside the

container carefully as blades are sharp.

Shaft

QB1004NZ_30_IB_120626_2.indd 7 12-06-26 12:59 PM

3 Add the ingredients to be processed

into the Master Prep™ Professional

Pitcher.

IMPORTANT: Never add ingredients

into the Master Prep™ Professional

Pitcher before placing the blades in

ﬁrst.

4 Place the pitcher splash guard onto the

top of the Master Prep™ Professional

Pitcher. (ﬁg. 3)

5 Place the power head on top of the

pitcher splash guard making sure

that it is securely in place. (ﬁg. 4) DO

NOT attempt to operate the appliance

without the safety splash guard in

place.

6 To start the appliance, plug the power

cord into the electrical outlet, securely

hold power head while operating

and press on the on/off pulse button

located on the top of the power head.

(ﬁg. 5)

7 Hold the Master Prep™ Professional

Pitcher ﬁrmly while depressing the

on/off pulse button to ensure the unit

stays in place.

NOTE: DO NOT operate the appliance

continuously for more than 15 seconds

at a time.

8 To stop the appliance, remove your

ﬁngers from the on/off pulse button.

9 In order to obtain a better quality of

chopping, operate the appliance by

using the “pulse” method.

10 Make sure that the blades have

stopped completely before removing

the power head.

11 If the ingredients stick to the side of

the Master Prep™ Professional Pitcher,

stop the appliance, remove the power

head and the splash guard. Use a

spatula to dislodge the pieces and then

replace the splash guard and the power

head. Continue processing.

12 Depending on the consistency of the

contents, use the pouring spout to

empty liquid contents.

13 For thicker consistencies, ﬁrst remove

splash guard and blade (by its shaft),

then empty contents of the Master

Prep™ Professional Pitcher.

QB1004NZ_30_IB_120626_2.indd 8 12-06-26 12:59 PM

Using the Master Prep™ Professional Bowl

Shaft

CAUTION: Blades are sharp! Use

extreme caution when handling the

blades. Always hold them by the shaft.

IMPORTANT: Never run the appliance

empty.

1 Place the Master Prep™ Professional

bowl on a clean, dry, level surface.

2 Holding the lower blade by the shaft,

place it over the spindle pin inside the

Master Prep™ Professional bowl. (ﬁg. 1)

3 Carefully insert the upper blade over

the lower blade rotating it until it locks

onto the lower blade. (ﬁg. 2)

IMPORTANT: Always assemble the

blades inside the container.

WARNING: DO NOT try to place the

blades onto the power head and then

into the Master Prep™ Professional b o w l .

4 Place the food that you want to process

into the Master Prep™ Professional b o w l .

IMPORTANT: Never add ingredients

into the Master Prep™ Professional bowl

before placing the blade assembly in

ﬁrst.

NOTE: DO NOT add more than 2 cups

dry or 1 cup liquid ingredients as this

will strain the motor and may cause

overﬂow.

QB1004NZ_30_IB_120626_2.indd 9 12-06-26 12:59 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ninja Küchenmaschine Handbücher

Ninja

Ninja BN650UK Bedienungsanleitung

Ninja

Ninja CT682SP Bedienungsanleitung

Ninja

Ninja NJ100 Bedienungsanleitung

Ninja

Ninja Master Prep Professional QB1005Q Bedienungsanleitung

Ninja

Ninja BN650ANZ Bedienungsanleitung

Ninja

Ninja Mega Kitchen System Bedienungsanleitung

Ninja

Ninja BN650 Bedienungsanleitung

Ninja

Ninja BL685 Bedienungsanleitung

Ninja

Ninja PROFESSIONAL XL AUTO-IQ NF700C Series Bedienungsanleitung

Ninja

Ninja Mega Kitchen System BL770AMZ Series Bedienungsanleitung

Ninja

Ninja Master Prep QB600W Bedienungsanleitung

Ninja

Ninja NJ100 Bedienungsanleitung

Ninja

Ninja Pulse BL206Q Series Bedienungsanleitung

Ninja

Ninja CT800 Series Bedienungsanleitung

Ninja

Ninja Express Chop NJ100 Series Bedienungsanleitung

Ninja

Ninja NJ100NZ Bedienungsanleitung

Ninja

Ninja BN602 Bedienungsanleitung

Ninja

Ninja NN100 Series Bedienungsanleitung

Ninja

Ninja NJ100 Bedienungsanleitung

Ninja

Ninja BL770 series Bedienungsanleitung

Ninja

Ninja BL772 Bedienungsanleitung

Ninja

Ninja Precision Processor Bedienungsanleitung

Ninja

Ninja Express Chop NJ100C Bedienungsanleitung

Ninja

Ninja Master Prep QB1000UK series Bedienungsanleitung

Beliebte Küchenmaschine Handbücher anderer Marken

INNOLIVING

INNOLIVING INN-727 Bedienungsanleitung

Berkel

Berkel C32 Bedienungsanleitung

Beko

Beko CHP5554W Bedienungsanleitung

KitchenAid

KitchenAid 5KFP0719 Bedienungsanleitung

QUIGG

QUIGG KM 2017Wi.20 Bedienungsanleitung

Lakeland

Lakeland PRESS AND CHOP 31557 Bedienungsanleitung

Bosch

Bosch MMR08 GB Series Bedienungsanleitung

HOFFEN

HOFFEN Chef Express T9532 Bedienungsanleitung

Garland

Garland 852 ZG Bedienungsanleitung

Robot Coupe

Robot Coupe CL50 Gourmet Bedienungsanleitung

SAPIRHOME

SAPIRHOME SP-1111-K Bedienungsanleitung

Moulinex

Moulinex DJ3051 Bedienungsanleitung

Bosch

Bosch MUM5 Bedienungsanleitung

cecotec

cecotec Mambo Touch Bedienungsanleitung

KitchenAid

KitchenAid 9KFC0516 Bedienungsanleitung

Black & Decker

Black & Decker hc 300 Montageanleitung

Gorenje

Gorenje SBR 1000 DV Bedienungsanleitung

Arzum

Arzum AR 1128 Bedienungsanleitung