Nitrox Explore 250W Bedienungsanleitung
Attention: Dear users, according to the relevant national regulations,please do not use electric bicycles before carefully reading the
instructions and understanding the performance of electric bicycles. And please property keep this manual and the product certificate of the vehicle.
Electric Bicycle Instruction Manual
Nitrox Explore 250W
Important Safety Information
Parts Identification
Display screen recognition
Configuration Table
Pre-Ride Safety Checklist
Assembly Instructions
Guide to Electric bike installation
Gears Operation
Charging Procedure
Battery Charging Information
Maintenance
Troubleshooting
Safety Notes
1
2
3
5
6
9
10
14
15
17
18
19
21
Table of Contents
Helmets significantly reduce the rate of head injuries.Always wear a helmet that complies with your state laws when riding the E-bike .Check
with your local police department for requirements in your community.Make yourself more visible by wearing bright reflective clothing. Keep
your reflectors clean and eye protection Also check your state laws concerning other protective gear that may be required when riding fhe
E-bike.
Electric bikes can be dangerous to use. The user or consumer assumes all risk of personal injuries, damage, or failure of the bicycle or system and all
other losses or damages to themselves and others and to any property arising as a result of using the bicycle. It is important for you to understand your
new bicycle. By reading this manual before you go out on your first ride, you'll know how to get better performance, comfort, and enjoyment from your
new bicycle. It is also important that your first ride on your new bicycle is taken in a controlled environment, away from cars, obstacles, and other
cyclists.
Important Safety Information
WARNING:
1. Always Wear A Helmet
Your new E-bike incoiporates many features and functions that have never been built into a bicycle before. Read this manual thoroughly to
understand how those features enhance your riding pleasure and safety.
2. Know Your E-bike
Take it slow until you are miliar with the riding conditions that you encounter. Be especially careful in wet conditions as traction can be
greatly reduced and brakes becoming less effective.Never ride faster than conditions warrant or beyond your riding abilities.Remember that
alcohol,drugs, fatigue and inattention can significantly reduce your ability to make good judgement and safely.
3. Ride Within Your Limits
For your safety and enjoyment,and to insure a long life for your E-bike. Inspect and maintain your E-bike regularly.Follow the inspection and
maintenance guidelines beginning on page 3. Check critical safety equipment before each and every ride.
4. Keep Your E-bike In Safe Condition
1
Parts Identification
Display
Handlebar
Power button
Speed mode
T
LED Headlight
Front fender
Disc brake rotor
ire
Front Fork
Battery
Pedals
Chain Crank
Tire
Derailleur
Bike motor
Rear fender
Light
Controller
Seat
Bike Frame
2
Gear adjustment
Gear adjustment
3
Configuration Table
Item Name
Vehicle Size
Packing Size
Color
Frame Material
Net Weight
Gross Weight
Max. Support Weight
Max Speed
Inner Tire Pressure
Model No.
Charger
Battery
Brake System
Tire Size
Pedal
Product specification
164*68*115(CM)
142.5*27*86.5(CM)
Black
Steel
Approx.33.3kg(73.41lb)
Approx.41.8kg(92.15"lb)
120kg(264.55lb)
25KM/H (pls contact with seller if you have questions )
20PSI / 140KPA
AC-DC 54.6V 2A 100-240V
V8F 2.0
AC DC5.5X2.1
48V15AH
Front and back brake
20x4.0
Aluminum alloy pedal
4
Instructions before riding
Safety Check
1. Brakes
2. Wheels and Tires
3. Steering
4. Chain
5.Bearings
Basic Steps
Notice:Before every riding,and after every 25-45 miles,we advise following the pre-riding safety checklist in the table below.
5
6. Cranks and Pedals
7. Derailleurs
8. Frame, Fork,
and Seat
9. Motor Drive
Assembly and Throttle
10. Battery
11. Electrical Cables
6
12. Accessories
Your cables,spokes,and chain will stretch after an initial break-in period of 50-100 mile (80-160km),and bolted connections can loosen.Always have a
certified,reputable be mechanic perform on your E-bike after your initial break-in period of 50-100 mile (80-160km) (depending on riding conditions such as
total weight,riding characteristics,and terrain).Regular inspections and tune-ups are particularly important for ensuring that your bike remains safe and fun
to ride.
7
Assembly Instructions
The following assembly steps are only a general guide to assist in the assembly of your bike from electric bikes and is not a complete or comprehensive
manual of all aspects of assembly, maintenance, and repair.
We recommend you consult a certified, reputable bike mechanic to assist in the assembly, repair, and maintenance of your bike.
Please recycle packaging materials especially cardboard and foam (all #6 EPS foam).
Ensure all pieces are included in the package including:
• V8FE-bike
• Manual(s)
• Assembly Tool kit
• Front fender
• Front Wheel
• Handlebar
• Handlebar holder
• Charger
• Pedals (marked left and right)
• Battery Keys (two, identical with number)
Step 1: Unpack e-bike from the carton and carefully set out all contents of the box. Remove packaging material protecting the bike frame and
components.
8
Inhaltsverzeichnis
Andere Nitrox Fahrrad Handbücher
