Nobles SpeedGleam Produkthandbuch

ENGLISH - ESPAÑOL

Operator and Parts Manual

Manual del Operador y Piezas

Model No.:

612963 – SpeedGleam

612964 – SpeedGleam Pac.

612965 – SpeedGleam Pac. Can.

612966 – SpeedGleam Plus

612967 – SpeedGleam Plus Pac.

612968 – SpeedGleam Plus Pac. Can.

36 Volt Dust Control Burnisher

Pulidora con control de polvo de 36V

SpeedGleam/Plus

612938

Rev. 01 (03-02)

CUSTOMER SERVICE: 1-800-365-6625

FAX: 1–800–678–4240

NOBLES

12875 RANSOM STREET

HOLLAND MI 49424 U.S.A.

Home

Find...

Go To..

OPERATION

2Nobles SpeedGleam/Plus (01–02)

This manual is furnished with each new model. It

provides necessary operation and maintenance

instructions and an illustrated parts list.

Read this manual completely and understand the

machine before operating or servicing it.

Use the illustrated Parts List to order replacement

parts. Before ordering parts or supplies, be sure to

have your machine model number and serial number

available. Parts and supplies may be ordered by

phone or mail from any authorized parts and service

center, distributor or from any of the manufacturer’s

subsidiaries.

This machine will provide excellent service. However,

the best results will be obtained at minimum costs if:

SThe machine is operated with reasonable care.

SThe machine is maintained regularly - per the

maintenance instructions provided.

SThe machine is maintained with manufacturer

supplied or equivalent parts.

MACHINE DATA

Please fill out at time of installation for future reference.

ModelNo.-

Install. Date -

Serial No.-

E2002 Tennant Company Printed in U.S.A

Nobles and Speedgleam are registered United States trademarks of Tennant

Company.

Home

Find...

Go To..

OPERATION

Nobles SpeedGleam/Plus (03–02) 3

TABLE OF CONTENTS

SAFETY PRECAUTIONS 4. . . . . . . . . . . . . . . . . . . .

SAFETY LABELS 5. . . . . . . . . . . . . . . . . . . . . . . . . . .

MACHINE COMPONENTS 6. . . . . . . . . . . . . . . . . . .

CONTROL PANEL SYMBOLS 6. . . . . . . . . . . . . . .

MACHINE INSTALLATION 7. . . . . . . . . . . . . . . . . . .

UNCRATING MACHINE 7. . . . . . . . . . . . . . . . . .

INSTALLING BATTERIES 7. . . . . . . . . . . . . . . .

MACHINE SETUP 8. . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLING PAD 8. . . . . . . . . . . . . . . . . . . . . . .

INSTALLING DUST CONTROL BAG 8. . . . . . .

ADJUSTING THE CONTROL GRIP HEIGHT 8

MACHINE OPERATION 9. . . . . . . . . . . . . . . . . . . . .

PRE–OPERATION 9. . . . . . . . . . . . . . . . . . . . . . .

BURNISHING WITH THE PUSH MODEL 9. . .

BURNISHING WITH THE DRIVE MODEL 10. .

WHILE OPERATING MACHINE 11. . . . . . . . . . .

CIRCUIT BREAKERS 11. . . . . . . . . . . . . . . . . . . .

EMERGENCY STOP BUTTON

(DRIVE MODEL–OPTION) 11. . . . . . . . . . . . . . . .

HOUR METER (OPTION) 12. . . . . . . . . . . . . . . .

LOW VOLTAGE PAD SHUT-OFF METER

(DRIVE MODEL–OPTION) 12. . . . . . . . . . . . . . . .

CHARGING BATTERIES 12. . . . . . . . . . . . . . . . . . . .

MACHINE MAINTENANCE 13. . . . . . . . . . . . . . . . . .

DAILY MAINTENANCE 13. . . . . . . . . . . . . . . . . . .

WEEKLY MAINTENANCE 14. . . . . . . . . . . . . . . .

MONTHLY MAINTENANCE 14. . . . . . . . . . . . . . .

QUARTERLY MAINTENANCE 14. . . . . . . . . . . .

BATTERY MAINTENANCE 15. . . . . . . . . . . . . . .

TRANSPORTING MACHINE 15. . . . . . . . . . . . . . . . .

STORING MACHINE 15. . . . . . . . . . . . . . . . . . . . . . . .

RECOMMENDED STOCK ITEMS 15. . . . . . . . . . . . .

TROUBLE SHOOTING 16. . . . . . . . . . . . . . . . . . . . . .

MACHINE SPECIFICATIONS 17. . . . . . . . . . . . . . . .

MACHINE DIMENSIONS 17. . . . . . . . . . . . . . . . .

ELECTRICAL DIAGRAMS 36. . . . . . . . . . . . . . . . . . .

PARTS LIST 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MAIN HOUSING GROUP 40. . . . . . . . . . . . . . . . .

DUST BAG AND BATTERY COVER GROUP 42

BATTERY AND CHARGER GROUP 43. . . . . . .

PAD DRIVER GROUP 44. . . . . . . . . . . . . . . . . . .

DRIVE GROUP (Drive Model) 46. . . . . . . . . . . . .

WHEEL GROUP (Push Model) 48. . . . . . . . . . . .

CONTROL CONSOLE GROUP (Drive Model) 50

CONTROL CONSOLE GROUP (Push Model) 52

OPTIONS 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HOUR METER KIT 54. . . . . . . . . . . . . . . . . . . . . .

LOW VOLTAGE SHUT-OFF KIT 54. . . . . . . . . . .

EMERGENCY STOP KIT 54. . . . . . . . . . . . . . . . .

KEY SWITCH KIT 54. . . . . . . . . . . . . . . . . . . . . . .

FLASHING LIGHT KIT 55. . . . . . . . . . . . . . . . . . .

PARKING BRAKE KIT 56. . . . . . . . . . . . . . . . . . . .

Home

Find...

Go To..

OPERATION

4Nobles SpeedGleam/Plus (03–02)

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is

designed exclusively to burnish dry floors in an

indoor environment and is not constructed for any

other use. Use only recommended burnishing

pads.

All operators must read, understand and practice

the following safety precautions.

The following safety alert symbols are used throughout

this manual as indicated in their description.

WARNING: To warn of hazards or unsafe

practices which could result in severe personal

injury or death.

FOR SAFETY: To identify actions which must be

followed for safe operation of equipment.

The following information signals potentially

dangerous conditions to the operator or

equipment:

FOR SAFETY

1. Do not operate machine:

–With flammable liquids or near flammable

vapors as an explosion or flash fire may

occur.

–Unless trained and authorized.

–Unless operation manual is read and

understood.

–If not in proper operating condition.

–On wet or damp surfaces.

–With the use of a liquid substance.

–In outdoor areas.

–Without dust bag in place.

2. Before starting machine:

–Make sure all safety devices are in place

and operate properly.

3. When using machine:

–Go slow on inclines and slippery surfaces.

–Use care when reversing machine.

–Always follow safety and traffic rules.

–Report machine damage or faulty

operation immediately.

4. Before leaving or servicing machine:

–Stop on level surface.

–Turn off machine.

–Set parking brake, if equipped.

5. When servicing machine:

–Avoid moving parts. Do not wear loose

jackets, shirts, or sleeves.

–Block machine tires before jacking

machine up.

–Use hoist or jack of adequate capacity to

lift machine.

–Disconnect battery connections before

working on machine.

–Wear protective eyewear and gloves when

handling batteries or battery cables.

–Avoid contact with battery acid.

–Use manufacturer supplied or approved

replacement parts.

6. When transporting machine:

–Do not lift machine if batteries are

installed.

WARNING: Batteries emit hydrogen gas.

Explosion or fire can result. Keep sparks and

open flame away. Keep battery compartment open

when charging.

WARNING: Flammable materials or reactive

metals can cause explosion or fire. Do not pick

up.

WARNING: To reduce the risk of fire,

explosion or personal injury, do not use

flammable liquids or operate machine in or near

flammable vapors/liquids or combustible dusts,

as the electric motor will spark upon start up and

during operation which could cause a flash fire or

explosion. This machine is not equipped with an

explosion proof motor.

WARNING: Moving parts. Turn off power

before working on machine.

Home

Find...

Go To..

OPERATION

Nobles SpeedGleam/Plus (03–02) 5

SAFETY LABELS

The safety labels appear on the machine in the

locations indicated. Replace labels if they become

damaged or illegible.

FOR SAFETY LABEL –

Located on control Console.

FOR SAFETY:

Read manual

before operating

machine.

WARNING: Batteries emit

hydrogen gas. Explosion

or fire can result. Keep

sparks and open flame

away. Keep battery

compartment open when

charging.

WARNING: Moving parts.

Turn off power before

working on machine.

WARNING LABEL –Located on control

console. The label warns operator of safe

practices of equipment –English text.

Battery Charging

Label –Located in

battery compartment.

Moving Parts Label –

Located on pad housing.

Home

Find...

Go To..

OPERATION

6Nobles SpeedGleam/Plus (01–02)

MACHINE COMPONENTS

5 6

1. Adjustable Control Console

2. Control Grips

3. Console Height Adjustment Levers

4. Main Power ON/OFF Switch (Drive Model)

5. Main Power ON/OFF Switch (Push Model)/

Pad ON/OFF Switch (Drive Model)

6. Pad Pressure Switch

7. Pad Pressure Meter

8. Battery Meter

9. Pad/Drive Start Triggers

10. Speed Control Knob (Drive Model)

11. Reverse Trigger (Drive Model)

12. Main Power ON/OFF Key Switch (Option)

13. Emergency Stop Switch (Option –Drive Model)

14. Hour Meter (Option)

15. Rear Tilt Wheels –for pad installation

16. Safety Tilt Shut–Off Switch

–for pad installation

17. Dust Control Bag Compartment

18. Wall Rollers

19. Battery Compartment Hood

20. Battery Charge Plug

21. Dust Control Skirt

22. Low Voltage Interrupter Meter (Option)

23. Circuit Breaker Buttons

24. Parking Brake (Option –Drive Model)

CONTROL PANEL SYMBOLS

Main Power

Pad Motor

Circuit Breaker

Main Power

Circuit Breaker

Battery Charge

Fast Slow

Reverse

Pad

Pad Pressure

Key Switch Hour Meter

Home

Find...

Go To..

OPERATION

Nobles SpeedGleam/Plus (01–02) 7

MACHINE INSTALLATION

UNCRATING MACHINE

Carefully check carton for signs of damage. Report

damages at once to carrier.

Check Machine Contents to ensure package is

complete. Contact distributor for missing items.

Machine Contents:

2 –Battery Cables #611116000

6 –Battery Cable Boots

1 –Battery Tray #604298

1 –Dust Bag, Cloth (Installed) #900210.

1 –Dust Bag, Paper #611781

1 –20 inch Hair Blend Burnishing Pad (installed)

#611788–Carton of 5.

3 –12V 215AH Batteries (Optional) #600394

1 –Battery Charger, 36DC/25A, 120V (Optional)

#469760868.

To uncrate your machine, remove shipping straps and

carefully lift or use a ramp to remove machine from

pallet. Do not roll machine off pallet, damage may result.

ATTENTION: To prevent machine damage, install

batteries after removing machine from pallet.

FOR SAFETY: When transporting machine, do not

lift machine if batteries are installed.

INSTALLING BATTERIES

WARNING: Batteries emit hydrogen gas.

Explosion or fire can result. Keep sparks and

open flame away. Keep battery compartment open

when charging.

FOR SAFETY: When servicing machine, wear

protective eyewear and gloves when handling

batteries or battery cables. Avoid contact with

battery acid.

Recommended Battery Specifications:

Three 12 volt, deep cycle, 215 amp hour batteries.

Part Number #600394. Maximum battery dimensions

are 178 mm (7 in)W x 394 mm (15.5 in)L x 362 mm

(14.25 in) H.

1. Park the machine on a level surface.

2. Turn the main power switch to the OFF position

and remove key, if equipped.

3. Unlatch and hinge open both the dust bag hood

and the battery hood to access the battery

compartment.

Remove the two loose battery cables and cable

boots from the battery tray (Figure 1).

FIG. 1

4. Carefully install the batteries into the battery tray

with the battery posts arranged as shown. Then

place the battery carrying handles on top of the

batteries to allow clearance for battery hood

(Figure 2).

MACHINE FRONT

FIG. 2

ATTENTION: Do not drop batteries into

compartment. Battery and machine housing

damage may result.

5. Using the cable boots, connect the battery cables

to the battery posts as shown, RED TO POSITIVE

& BLACK TO NEGATIVE (Figure 3).

Connect Last

BLK

MACHINE FRONT

IMPORTANT:

Route cables to left

of machine to allow

hood clearance.

RED

BLK

RED

NOTE: Black wire #31

connects to negative

post on middle battery.

CHARGER

PLUG

BLK

FIG. 3

6. Apply a light coating of non–metallic grease or

protective spray on the cable connections to

prevent battery corrosion.

Home

Find...

Go To..

OPERATION

8Nobles SpeedGleam/Plus (01–02)

MACHINE SETUP

INSTALLING PAD

NOTE: Consult your authorized distributor for pad

recommendations.

Pad Specifications required:

SFor 2000 RPM burnishing.

S25.4mm (1.0 in) thickness

S508mm (20 in) dia. with 89mm (3.5 in) center hole.

NOTE: Machine is not designed for spray buffing.

1. Turn the main power switch off and tilt the

machine back on its rear wheels (Figure 4).

FOR SAFETY: Before leaving or servicing

machine, stop on level surface and turn off

machine.

NOTE: For safety, when machine is tilted on its rear

wheels, power to the pad motor automatically shuts off.

FIG. 4

ATTENTION: Do not leave machine tilted back for

an extended time, battery acid may leak.

2. Remove the plastic center lock from pad driver by

turning the lock counterclockwise.

3. Position the pad centered on the pad driver and

replace the centerlock securely (Figure 5).

FIG. 5

NOTE: Make sure centerlock does not cross thread or

floor damage may occur.

ATTENTION: Do not operate machine without a

pad and/or centerlock in place.

4. After installing pad, return machine to operating

position.

INSTALLING DUST CONTROL BAG

1. Open the dust control bag compartment at the

front of the machine.

2. Slide the bag over the plastic snout. Close

compartment (Figure 6).

FIG. 6

3. Empty or replace the dust bag daily. Do not allow

bag to fill beyond half full.

ADJUSTING THE CONTROL GRIP HEIGHT

The machine has three control grip height settings.

1. Locate the two spring loaded levers below the

console (Figure 7).

2. Squeeze the levers together and lift or lower

control grips to a comfortable operating height

(Figure 7).

FIG. 7

Home

Find...

Go To..

OPERATION

Nobles SpeedGleam/Plus (01–02) 9

MACHINE OPERATION

FOR SAFETY: Do not operate machine unless

operator manual is read and understood.

WARNING: To reduce the risk of fire,

explosion or personal injury, do not use

flammable liquids or operate machine in or near

flammable vapors/liquids or combustible dusts,

as the electric motor will spark upon start up and

during operation which could cause a flash fire or

explosion. This machine is not equipped with an

explosion proof motor.

PRE–OPERATION

1. Sweep floor and remove debris.

2. Check condition of pad.

3. Check battery charge level (For accurate reading

pad must be spinning). Batteries will need

recharging if battery meter reads in the yellow or

red zone.

4. Check that the dust control bag is installed.

5. Make sure the floor is completely dry.

BURNISHING WITH THE PUSH MODEL

1. Turn key on, if equipped, then turn the main power

to the ON position (Figure 8).

FIG. 8

2. Pull the trigger switches to start the pad spinning.

The pad will automatically draw to floor (Figure 9).

FIG. 9

3. Slowly push the machine forward to begin

burnishing.

FOR SAFETY: When using machine, go slow on

inclines and slippery surfaces.

4. Press the pad pressure switch to increase (+) or

decrease (–) the pad pressure. Adjust the pad

pressure so that the pad pressure meter reads

within the green zone (Figure 10).

ATTENTION: Do not operate the machine with the

pad pressure meter adjusted in the red zone, floor

damage and brush motor overload will result.

FIG. 10

NOTE: If machine vibrates, remove pad and realign.

ATTENTION: Keep machine moving at all times to

prevent floor damage.

5. To stop burnishing, release the triggers. The pad

will automatically raise to the transport position.

FOR SAFETY: When transporting machine, do not

lift machine if batteries are installed.

Home

Find...

Go To..

OPERATION

10 Nobles SpeedGleam/Plus (01–02)

BURNISHING WITH THE DRIVE MODEL

1. Turn key on, if equipped, then turn the main power

and pad switches to the ON position (Figure 11).

FIG. 11

2. Turn the speed control knob to the slowest setting.

This will prevent an abrupt take off (Figure 12).

FIG. 12

3. Pull the trigger switches to begin burnishing. The

machine will slowly begin to move forward and the

pad will automatically draw to floor and begin to

spin. To increase the speed, gradually turn the

speed control knob to the desired speed

(Figure 13).

FIG. 13

FOR SAFETY: When using machine, go slow on

inclines and slippery surfaces.

4. Press the pad pressure switch to increase (+) or

decrease (–) the pad pressure. Adjust the pad

pressure so that the pad pressure meter reads

within the green zone (Figure 14).

ATTENTION: Do not operate the machine with the

pad pressure meter adjusted in the red zone, floor

damage and brush motor overload will result.

FIG. 14

NOTE: If machine vibrates, realign pad.

ATTENTION: Keep machine moving at all times to

prevent floor damage.

5. To operate machine in reverse, simply pull the

reverse trigger (Figure 15).

FIG. 15

6. To stop machine, release the triggers. The pad will

automatically raise to the transport position.

7. To transport machine, turn the pad switch off and

pull the triggers. The pad will automatically raise to

the transport position.

FOR SAFETY: When transporting machine, do not

lift machine if batteries are installed.

Home

Find...

Go To..

Andere Handbücher für SpeedGleam

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nobles Bodenreinigungsmaschine Handbücher

Nobles

Nobles Concorde 608349 Leitfaden

Nobles

Nobles 608352 Produkthandbuch

Nobles

Nobles FALCON 2800 PLUS Produkthandbuch

Nobles

Nobles FALCON ULTRA B Produkthandbuch

Nobles

Nobles SpeedGleam Produkthandbuch

Nobles

Nobles Marksmant 412 Bedienungsanleitung

Nobles

Nobles Flood Pumper Plus Bedienungsanleitung

Nobles

Nobles Speed Scrub Rider Bedienungsanleitung

Nobles

Nobles Strive ReadySpace Bedienungsanleitung

Nobles

Nobles SPEED SCRUB Bedienungsanleitung

Nobles

Nobles Speed Scrub Rider Bedienungsanleitung

Nobles

Nobles SPEED SCRUB Bedienungsanleitung

Nobles

Nobles FALCON 2800 PLUS Bedienungsanleitung

Nobles

Nobles Marksmant 412 Produkthandbuch

Nobles

Nobles Typhoon 1610P Pumpout Produkthandbuch

Nobles

Nobles Speedshine Series 9001766 Produkthandbuch

Nobles

Nobles Trooper 1000 Bedienungsanleitung

Nobles

Nobles 608567 Produkthandbuch

Nobles

Nobles 1002564 - 1016 Power Eagle Produkthandbuch

Nobles

Nobles BR--2500 Bedienungsanleitung

Nobles

Nobles EZ Rider HP Bedienungsanleitung

Nobles

Nobles SpeedGleam Bedienungsanleitung

Nobles

Nobles Trooper 1500H 608570 Produkthandbuch

Nobles

Nobles 24 Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch

BETCO

BETCO PB24 Bedienungsanleitung