Nokia BH-607 Bedienungsanleitung

Nokia Bluetooth Headset BH-607

Issue 2.

ENGLISH

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this BH-607 product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be

found at http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Nokia operates a policy of continuous

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

To the maximum extent permitted by

applicable law, under no circumstances shall

Nokia or any of its licensors be responsible

for any loss of data or income or any special,

incidental, consequential or indirect

damages howsoever caused.

The contents of this document are provided

"as is". Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made in

relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior notice.

The availability of particular products may

vary by region. Please check with your Nokia

dealer for details. This device may contain

commodities, technology or software

subject to export laws and regulations from

the US and other countries. Diversion

contrary to law is prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Headset

BH-607, you can make and answer

calls hands-free with your compatible

mobile device. The headset is provided

with wind noise reduction and noise

cancellation that helps you handle

calls in noisy environments.

Read this user guide carefully before

using the headset. Also, read the user

guide for the device that you connect

to the headset.

This product may contain small parts.

Keep them out of the reach of small

children.

Note: The surface of this

device does not contain

nickel in the platings. The

surface of this device contains stainless

steel.

My own key

The headset has a shortcut key that

you can set to perform different

functions on a compatible Nokia

device using the Nokia Accessory

Setup Application.

With the application, you can also

view headset information and define

headset settings when the headset is

connected to your device. For details,

read the built-in help of the

application.

If the application is not already

installed in your mobile device, check

the availability of the application for

your device from the support pages of

this headset at www.nokia.com/

support or your local Nokia website.

If the application is not available for

your Nokia device, you can use the

ENGLISH

shortcut key to mute the microphone

during a call.

Bluetooth wireless technology

Bluetooth wireless technology allows

you to connect compatible devices

without cables. The headset and the

other device do not need to be in line

of sight, but they should be within 10

metres (33 feet) of each other.

Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the Headset Profile 1.1 and

Hands-Free Profile 1.5. Check with the

manufacturers of other devices to

determine their compatibility with

this device.

Get started

The headset contains the following

parts shown on the title page: power

key (1), volume key (2), My own key

(3), answer/end key (4), microphones

(5), indicator light (6), charger

connector (7), earloop (8), and

earpiece (9).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic. Metallic

materials may be attracted to the device.

Do not place credit cards or other

magnetic storage media near the device,

because information stored on them may

be erased.

Charge the battery

Before charging the battery, carefully

read “Battery and charger

information”.

ENGLISH

Warning: Use only chargers

approved by Nokia for use

with this particular model.

The use of any other types may invalidate

any approval or warranty, and may be

dangerous. Use of unapproved chargers

may present a risk of fire, explosion, or

other hazard.

When you disconnect the power cord of

any accessory, grasp and pull the plug,

not the cord.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to the

charger connector. The red

indicator light is displayed during

charging.

Charging the battery fully may take

up to 1 hour. Charging the battery

with the AC-15 charger for 15

minutes provides up to 5 hours of

talk time.

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet.

The fully charged battery has power

for up to 7 hours of talk time or up to

160 hours of standby time.

To check the battery charge when the

headset is not connected to a charger,

press the power key when the headset

is connected to a mobile device. If the

indicator light is green, the charge

level is sufficient. If the light is yellow,

you may need to recharge the battery

soon. If the light is red, recharge the

battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the power

key for about 2 seconds. The headset

beeps, and the green indicator light

ENGLISH

flashes slowly while the headset tries

to connect to one or two last

connected devices. When the headset

is connected to at least one device and

is ready for use, the blue indicator

light flashes slowly. If the headset has

not been paired with a device, it

automatically enters pairing mode.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the headset

is not connected to a device within

about 30 minutes, it switches off

automatically.

Pair and connect the headset

Before using the headset, you must

pair and connect it to a compatible

device.

You can pair the headset with up to

eight devices, but you can connect it

to only up to two devices at a time.

1. Ensure that your mobile device is

switched on and the headset is off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The headset

enters pairing mode, and the blue

indicator light starts to flash

quickly.

If the headset has been previously

paired with a device, ensure that

the headset is switched off, and

press and hold the power key for

about 5 seconds until the blue

indicator light starts to flash

quickly.

3. Within about 3 minutes, activate

the Bluetooth feature on your

device, and set it to search for

Bluetooth devices. For details, see

the user guide of your mobile

device.

4. Select the headset from the list of

found devices.

ENGLISH

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes slowly.

To manually connect the headset to

one or two last used devices, press and

hold the answer/end key for about 2

seconds (when no devices are

connected), or make the connection in

the Bluetooth menu of the desired

device. If you have a device connected

to the headset and want to connect a

second device, make the connection in

the Bluetooth menu of the device.

You may be able to set your device so

that the headset connects to it

automatically. To activate this feature

in a Nokia device, change the paired

device settings in the Bluetooth menu.

Basic use

Change the earpad

The headset may be provided with

different sized earpads. Select the

earpad that fits the best and is the

most comfortable for your ear.

To change the earpad, pull the current

earpad from the earpiece, and push

the new earpad into place (13).

Place the headset on the ear

Gently push the earpiece against your

ear.

ENGLISH

You can rotate the earpad to keep the

headset securely in the ear (14). For

example, if you use the headset on the

right ear, you may need to rotate the

earpad to the right for the best fit. If

you wear an earring, ensure that it is

not accidentally attached to the

earpad.

To use the headset with the earloop,

attach the earloop to it (12). To detach

the earloop, gently pull it from the

headset. Slide the earloop behind your

ear (10), and point the headset

towards your mouth (11). Push or pull

the earloop to set its length.

Adjust volume

The headset automatically adjusts the

volume according to ambient noise. To

manually adjust the volume, slide the

volume key up or down. To adjust the

volume quickly, slide and hold the key.

The selected volume level is saved for

the device that you currently use with

the headset.

Calls

To make a call, use your mobile device

in the normal way when the headset is

connected to it.

To redial the number you last called (if

your mobile device supports this

feature with the headset), when no

call is in progress, press the answer/

end key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds. Proceed

as described in the user guide of the

mobile device.

To answer or end a call, press the

answer/end key. To reject a call, press

this key twice.

ENGLISH

To mute or unmute the microphone

during a call, press the volume key. The

headset beeps, and a related icon is

displayed on your device (if supported

by the device).

To switch a call between the headset

and a compatible connected device,

press and hold the answer/end key for

about 2 seconds.

Manage two calls

To manage two calls at the same time,

your mobile device must support the

Bluetooth Hands-Free Profile 1.5, and

call waiting must be activated in the

device. Call waiting is a network

service and is available when the

headset is connected to only one

device.

To answer a waiting call and end the

active call, press the answer/end key.

To answer a waiting call and put the

active call on hold, press and hold the

answer/end key for about 2 seconds.

To end the active call and make the

call on hold active, press the answer/

end key.

To switch between the active call and

the call on hold, press and hold the

answer/end key for about 2 seconds.

Turn lights on or off

By default, the indicator lights are

shown in all situations. To turn the

lights off in some situations (for

example, during a call or when the

headset is connected to a mobile

device), press and hold the answer/

end key, and slide and hold the volume

key down for about 5 seconds when

the headset is connected to a device.

The yellow indicator light flashes

once.

Andere Handbücher für BH-607

Inhaltsverzeichnis

Andere Nokia Headset Handbücher

Nokia

Nokia BH-121 Bedienungsanleitung

Nokia

Nokia HS 36W Bedienungsanleitung

Nokia

Nokia BH-216 Bedienungsanleitung

Nokia

Nokia BH-112 Bedienungsanleitung

Nokia

Nokia WH-800 Bedienungsanleitung

Nokia

Nokia HS-54W - Headset - Over-the-ear Kurzanleitung

Nokia

Nokia HS HS 4W Bedienungsanleitung

Nokia

Nokia 02715Z1 Bedienungsanleitung

Nokia

Nokia WH 600 - Headset - Binaural Bedienungsanleitung

Nokia

Nokia BH 212 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-218 Bedienungsanleitung

Nokia

Nokia BH-905I Bedienungsanleitung

Nokia

Nokia HS-53W Bedienungsanleitung

Nokia

Nokia Bluetooth Headset BH-701 Bedienungsanleitung

Nokia

Nokia BH-801 - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-702 Bedienungsanleitung

Nokia

Nokia HS 26W - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-214 Service-Handbuch

Nokia

Nokia BH-800 Bedienungsanleitung

Nokia

Nokia HS-54W - Headset - Over-the-ear Bedienungsanleitung

Nokia

Nokia BH-101 Bedienungsanleitung

Nokia

Nokia BH-904 Bedienungsanleitung

Nokia

Nokia BH-210 Bedienungsanleitung

Nokia

Nokia BH 301 - Headset - Over-the-ear Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung