Norbar NORTRONIC Bedienungsanleitung

OPERATOR’S MANUAL

NORTRONIC®

Part Number 34399 | Issue 4 | Original Instructions (English)

NORBAR TORQUE TOOLS LTD

Wildmere Road, Banbury,

Oxfordshire, OX16 1JU

UNITED KINGDOM

Tel + 44 (0)1295 270333

Email enquiry@norbar.com

NORBAR TORQUE TOOLS PTY LTD

45–47 Raglan Avenue, Edwardstown,

SA 5039

AUSTRALIA

Tel + 61 (0)8 8292 9777

Email enquiry@norbar.com.au

NORBAR TORQUE TOOLS INC

36400 Biltmore Place, Willoughby,

Ohio, 44094

USA

Tel + 1 866 667 2279

Email inquiry@norbar.us

NORBAR TORQUE TOOLS PTE LTD

194 Pandan Loop

#07-20 Pantech Business Hub

SINGAPORE 128383

Tel + 65 6841 1371

Email enquiries@norbar.sg

NORBAR TORQUE TOOLS (SHANGHAI) LTD

91 Building-7F, No.1122 North Qinzhou Rd,

Xuhui District, Shanghai

CHINA 201103

Tel + 86 21 6145 0368

Email sales@norbar.com.cn

NORBAR TORQUE TOOLS INDIA PVT. LTD

Plot No A-168, Khairne Industrial Area,

Thane Belapur Road, Mahape,

Navi Mumbai – 400 709

INDIA

Tel + 91 22 2778 8480

Email enquiry@norbar.in

www.norbar.com

www.norbar.com/HowtoUseANorTronic

All manuals and user guides at all-guides.com

all-guides.com

All manuals and user guides at all-guides.com

Contents

Introduction 3

Part Numbers Covered by This Manual 3

Parts Included 3

USB Wireless Adapters (accessory) 3

Software Compatibility 3

Features and Functions 4

Before Use 5

Preparation 5

Battery Fitting / Replacement 5

Ratchet Head Fitting / Replacement 5

Button Functions 6

Measure Display 6

Operation 7

Start Up 7

Peak Reading with Manual Reset 7

Peak Reading with Auto Reset 8

Tool Target 8

Targets – Change 9

Zero Display Offset 9

# of Saved Readings 9

Sleep 9

Resume from Sleep (Gyroscope drift calibration) 9

USB Interface 10

Wireless Interface 11

Low Battery 11

Flat Battery 11

Torque CRS 11

Multiplier 11

Exit Measure Display (Options Menu) 12

TDS Receive Results Interface 12

Tool Target - SETTING 13

Set Target 13

Audit mode 13

Set Angle Limit 13

Set Angle Target 13

Set Final Target 14

Linked Targets 14

TDS Target Interface 15

Tool SETUP 16

Torque Limits 17

Angle Limits 18

Units 18

Date & Time 18

Sleep 19

Angle 19

Auto Zero 19

Active From 19

Vibrate 20

Wireless 20

Auto Reset 21

Hold Time 21

All manuals and user guides at all-guides.com

Display 21

Multiplier 21

Complete 22

Warnings 22

Torque CRS 22

Data Store 23

View Results 23

Erase All 23

About 24

Specifications 25

EU Declaration of Conformity 27

Maintenance 28

NorTronic® Calibration 28

Battery Replacement 28

Repair 28

Cleaning 28

Product Disposal 28

Battery Disposal 28

Trouble Shooting 29

Glossary of Terms 29

All manuals and user guides at all-guides.com

INTRODUCTION

The NorTronic® is an electronic torque and angle wrench capable of measuring, displaying, storing and

transmitting test results and receiving configuration settings from TDS (Torque Data System PC software) via

the USB or wireless interface.

The tool comes in 3 torque capacities: - 50 N·m, 200 N·m & 330 N·m.

The NorTronic® features 2 identical colour displays positioned at 90 degrees to each other. This enables the

user to see a display when the tool is being operated in the vertical or horizontal plane.

The NorTronic® gives visual, audible and physical indication via vibration that the Tool Target has been reached.

Part Numbers Covered by This Manual

Part Number

Torque

Capacity

Ratchet

Square Drive

Wireless Communication

Frequency

43500

50 N·m

⅜”

868 MHz

43501

50 N·m

½”

868 MHz

43502

200 N·m

½”

868 MHz

43503

330 N·m

½”

868 MHz

43504

50 N·m

⅜”

915 MHz

43505

50 N·m

½”

915 MHz

43506

200 N·m

½”

915 MHz

43507

330 N·m

½”

915 MHz

NorTronic® models 43500, 43501, 43502 & 43503 use an 868MHz wireless frequency; this is designed for

use in Europe.

NorTronic® models 43504, 43505, 43506 & 43507 use a 915MHz wireless frequency; this is designed for use

in USA, Canada, Australia and New Zealand.

For use outside the above areas, disable wireless feature until regulatory approval is obtained.

Parts Included

Part Number

Quantity

NorTronic® electronic torque wrench.

4350X

USB flash drive (Manuals / Software).

61131

Quick reference guide.

34398

USB lead to PC (Mini USB to Type A).

39678

AA Rechargeable Battery

39663

Calibration Certificate.

NorTronic® carry case.

44506 - 44508

USB Wireless Adapters (Accessory)

USB Wireless Adapters

Part Number

USB Wireless Adapter (868 MHz)

43508

USB Wireless Adapter (915 MHz)

43509

Software Compatibility

NorTronic®

TDS

Reason for upgrade

Version 2.XX

2.0.XX

NOTE: ‘X’ is shown in place of the latest software release version #.

All manuals and user guides at all-guides.com

FEATURES AND FUNCTIONS

• TDS (Torque Data System) software included for complete data management and archiving to a PC.

Includes seamless data synchronisation. See TDS Manual part number 34397 for more information.

• All NorTronic® tools are Torque Handles with a 16mm spigot to interface to additional end fittings and

offsets. A push through ratchet head end fitting is supplied as standard.

• Ability to enter offset compensation for non-standard end fitting.

• NorTronic® can be locked from adjustment “P type” for production environments (via TDS).

• 2 colour 0.95” OLED displays for visual indication of measurement against Target status.

• Audible indication of Target status.

• Vibration feedback when Target reached.

• 4 digit resolution for all NorTronic® electronic torque wrenches.

• Maximum of 2400 (date & time stamped) reading memory store.

• 5 user buttons.

• Operational from three AA internal rechargeable / non rechargeable batteries.

• Up to 15 linked (or non-linked) Targets can be on the tool at any one time.

• USB port for interface to TDS.

• Built in Wireless transceiver for Wireless interface to TDS.

• 12 Torque units.

• Time & date stamped Test Results.

• Displays torque only or torque & angle.

• IP44 protection against dust and water ingress.

• Ability to Ratchet when measuring Angle.

• Directly display and save the output Torque of a HT (Hand Torque) gearbox when used in conjunction

with a NorTronic®.

• Produce, save, view and print Real Time Torque & Angle Graphs in conjunction with TDS.

• View and print Reports for Results in conjunction with TDS.

• 4 Target modes - Torque Target only, Snug Torque followed by Angle Target, Snug Torque followed by

Angle Target + final Torque Target or Audit Torque Target.

• Improved battery life when sleeping (batteries do not need to be removed for storage).

• ASCII mode for interfacing to third party control systems.

All manuals and user guides at all-guides.com

all-guides.com

BEFORE USE

Preparation

IMPORTANT: IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER,

THE PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED.

WARNING: ALLOW THE NORTRONIC® TO EQUALISE TO THE AMBIENT

TEMPERATURE/HUMIDITY BEFORE SWITCHING ON. WIPE OFF ANY

MOISTURE BEFORE USE.

Battery Fitting / Replacement

NOTE: Insert positive battery terminal into handle cavity first. Rotate the end cap clockwise to

tighten and counter-clockwise to release.

Ratchet Head Fitting / Replacement

NOTE: All NorTronic® tools are Torque Handles with a 16mm spigot. Should you wish to change

to a different spanner end fitting, depress the plunger on the ratchet head and pull to

release.

Depress

End cap

Battery +ve

All manuals and user guides at all-guides.com

BUTTON FUNCTIONS

Throughout SETUP and Operation, the buttons perform the following functions:

MEASURE DISPLAY

NOTE: Both of the displays on the NorTronic® show the same information at all times.

Function

Number of readings that have been saved for the current Target.

Shows the next peak reading that will be saved to the NorTronic® (if Auto Reset enabled).

Wireless connected to P.C. (TDS).

USB connected to P.C. (TDS).

Low Battery / Flat Battery.

Target less than 10% of Tool Capacity (ISO6789:2017)

Current Torque Units.

Torque reading.

Angle reading.

Current Snug Torque & Angle Target.

Torque CRS has been changed from default value.

Multiplier in use

Audit Target

Button

Function

Operation

SETUP

Change Target

Scroll through options or change a

selected value.

When changing a value, hold the button

down for a faster rate of change.

Zero Torque & Angle display if below

the Active From threshold.

Cancel the peak reading if above the

Active From threshold and send via

USB / Wireless.

Confirm a setting.

Exit the measure display.

Exit current menu / screen.

Save test results to NorTronic®.

None

M T = 100 + 30°

29°

332.1

19  I<10% N·m

All manuals and user guides at all-guides.com

Torque display

Torque input

Reset pressed

Active

From

Zero Torque

OPERATION

Start Up

The NorTronic® does not have a power ON/OFF switch. The NorTronic® is always powered up or in a deep

sleep mode.

Upon fitting the batteries and end cap, press any button to wake the NorTronic® up from sleep. The Norbar

logo is displayed for 2 seconds followed by the measure display:

Peak Reading with Manual Reset Operation

When Torque is applied, the NorTronic® will track the torque input until it has exceeded the Active From

setting (See page 19) and then enters into peak mode for Torque & Angle.

The Angle display is shown as “0°” until the Torque is above the Active From setting for the tool. If the Snug

Torque value is set (See page 13) and is above the Active From setting, the Angle display is shown as “0°”

until the Torque reaches the Snug Torque value and then displays the Angle value in peak mode.

After a Peak Torque or Angle has been applied and then the Torque has dropped below the Active From

setting, both the Torque & Angle readings continuously flash.

Press the ZERO button to Reset the Torque display to the current Torque input and Angle Display

to “0°”.

Press the SAVE button to Reset & Save the peak Torque & Angle readings to the Data Store on

the NorTronic® tool.

If a Target is in use and a reading has been saved, press the UP button (and hold in for 2 seconds)

to delete the last reading that has been saved via the Delete Last Result? confirmation screen.

Delete

Last Result ?

Y / N

All manuals and user guides at all-guides.com

Hold Time

Active

From

Zero Torque

Torque display

Torque input

Auto Reset

Trigger

Peak Reading with Auto Reset

When Torque is applied, the NorTronic® will track the torque input until it has exceeded the Active From

setting (See page 19) and then enters into peak mode for both Torque & Angle.

The angle display is shown as “0°” until the torque is above the Active From setting for the tool. If the Set

Target (Snug Torque) is set, the angle display is shown as “0°” until the torque reaches the Set Target

(Snug Torque) value (see page 13) and then displays the angle value in peak mode.

When a peak torque or angle has been applied after which the torque has dropped below the Active From

setting, both the torque & angle readings continuously flash for the duration of the Hold Time (see page 21).

The displays are then reset to the current torque input.

If the Save button (which now becomes latching) has been pressed prior to the Peak being

detected, the Torque & Angle readings are saved to the Data Store on the NorTronic®.

If a Target is in use and a reading has been saved, press the UP button (and hold in for 2

seconds) to delete the last reading that has been saved via the Delete Last Result?

confirmation screen.

Delete

Last Result ?

Y / N

Tool Target

Having already set a Tool Target (see page 13 for more details), the NorTronic® beeps as the applied torque

approaches the Torque Target (starting slow and getting faster) until a continuous tone is heard when the

Target has been reached. This stops after the Torque has been released.

The Torque & Angle digits will be shown as:

White = below Active From setting or no Target set

Yellow = above Active From setting, but below Target Lower Limit

Green = above Target Lower Limit and below Target Upper Limit

Red = above Target Upper Limit

The tool Vibrates when the Torque Target or Angle Target has been reached (if enabled in SETUP –

Vibrate, see page 20 for more information).

TIP: If an angle only target has been set, the beeper sounds as the user approaches the angle

target, quickening in frequency until a continuous tone when the angle target has been

reached.

All manuals and user guides at all-guides.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere norbar Elektrowerkzeuge Handbücher

norbar

norbar TTi20 Bedienungsanleitung

norbar

norbar PTM-72 Series Service-Handbuch

norbar

norbar EVOTORQUE Bedienungsanleitung

norbar

norbar 20506 Bedienungsanleitung

norbar

norbar ClickTronic Series Bedienungsanleitung

norbar

norbar ET2-72-1000-110 Bedienungsanleitung

norbar

norbar Slimline SL0 Bedienungsanleitung

norbar

norbar TruCheck 0.1 Bedienungsanleitung

norbar

norbar 34230 Bedienungsanleitung

norbar

norbar TT Series Betriebsanleitung

norbar

norbar PNEUTORQUE PTM series Bedienungsanleitung

norbar

norbar EvoTorque ET-72-1000-110 Bedienungsanleitung

norbar

norbar EvoTorque EBT Series Bedienungsanleitung

norbar

norbar NorTronic ASCII Bedienungsanleitung

norbar

norbar NorTronic 43501 Bedienungsanleitung

norbar

norbar EVOTORQUE 2 Bedienungsanleitung

norbar

norbar NorTronic Series Bedienungsanleitung

norbar

norbar 5 Bedienungsanleitung

norbar

norbar PNEUTORQUE PT 72 Series Bedienungsanleitung

norbar

norbar PNEUTORQUE PTME-72-1000 Service-Handbuch

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch

Silca

Silca MARKER 2000 Bedienungsanleitung

norbar NORTRONIC Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken