Nordson Spectra 30 HMI Bedienungsanleitung

Instruction Sheet P/N 1123825 10/2014

Spectra 30 HMI Kit - P/N 1123817

This instruction sheet describes how to replace the touch screen panel in

the Spectra 30 pattern controller.

WARNING: Risk of personal injury or equipment damage! Refer to

the safety information provided in the melter manual before servicing

the melter. Failure to comply with the safety information provided can

result in personal injury, including death.

Required Tools:

4mmhexkey

Large flat screwdriver

Touch Screen Panel

Replacing the Touch Screen Panel

Continue

1. Turn off the pattern controller switch and disconnect the

input power supply.

2. Unfasten the four captive screws (see ain

Figure 1) to remove the pattern controller front cover.

Allow only personnel with appropriate training and experience to

operateorservicetheequipment.Theuseofuntrainedor

inexperienced personnel to operate or service the equipment can

result in injury, including death, to themselves and others, and

damage to the equipment.

Warning:

Figure 1

a: Four captive screws

Figure 2

3. Remove the display ribbon cable (see cin Figure 2)

by lifting up the cable connector lock tabs and carefully

pulling it out.

4. Unfasten the two captive screws that hold the

touch screen panel to the base panel (see din

Figure 2).

5. Unfasten the two screws (see ein Figure 2)

that hold the touch screen panel to the metal plate

holder.

a: Touch screen panel b: Standoffs

c: Ribbon cable d: Two captive screws

e: Screws

6. Remove the touch screen panel (see ain

Figure 2) by compressing the standoffs (see b

in Figure 2).

7. Disconnect the following cables:

Figure 3

a: USB cable b: Network cable c: Touch screen panel power connector

Replacing the Touch Screen Panel,contd.

1. Re-connect the following cables:

Figure 4

Re-installing the Touch Screen Panel

SUSB cable (see ain Figure 3)

Snetwork cable (see bFigure 3)

Stouch screen panel power connector (see cFigure 3)

SUSB cable (see ain Figure 3)

Snetwork cable (see bFigure 3)

Stouch screen panel power connector (see cFigure 3)

2. Install the new touch screen panel by pressing it back into

the standoffs (see bin Figure 2).

3. Re-fasten the two screws to securely hold the touch screen

panel to the metal plate holder (see ein Figure 2).

a: Two screws b: Touch screen panel

4. Re-connect the display ribbon cable (see cin Figure 2). Make

sure to lock the ribbon cable in place by pressing down the cable

connector.

Sground wire

5. Re-fasten the two captive screws to securely hold the

touch screen panel to the base panel (see din Figure 2).

6. Re-install the front cover by re-fastening four captive

screws (see ain step 2) in Replacing the Touch Screen

Panel.

7. Turn on the input power supply.

Andere Nordson Controller Handbücher

Nordson

Nordson Sure Coat Stücklistenhandbuch

Nordson

Nordson PCI Bedienungsanleitung

Nordson

Nordson 1006453A Referenzhandbuch

Nordson

Nordson ValveMate 7197PCP-2K Bedienungsanleitung

Nordson

Nordson Encore Referenzhandbuch

Nordson

Nordson iTrax Referenzhandbuch

Nordson

Nordson 1064311A-02 Bedienungsanleitung

Nordson

Nordson Spectra 30 Bedienungsanleitung

Nordson

Nordson Vantage Referenzhandbuch

Nordson

Nordson Rhino XD3 Bedienungsanleitung

Nordson

Nordson Encore Stücklistenhandbuch

Nordson

Nordson Gun Controller Bedienungsanleitung

Nordson

Nordson ValveMate 7197PCP-2K Bedienungsanleitung

Nordson

Nordson CoolWave 2 Bedienungsanleitung

Nordson

Nordson Smart-Coat 107 000A Bedienungsanleitung

Nordson

Nordson 7197PCP-DIN Bedienungsanleitung

Nordson

Nordson IPS10A Bedienungsanleitung

Nordson

Nordson ValveMate 7197PCP-2K Bedienungsanleitung

Nordson

Nordson 765104 Bedienungsanleitung

Nordson

Nordson ValveMate 8000 Bedienungsanleitung

Nordson

Nordson Pro-Flo Stücklistenhandbuch

Nordson

Nordson Encore Enhance Referenzhandbuch

Nordson

Nordson ValveMate 7100 Bedienungsanleitung

Nordson

Nordson Encore Leitfaden

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung