Nortel BayStack 100-S Bedienungsanleitung

Wall Mounting the Instant Internet 100-S Unit

*211487-A*

You can mount the BayStack Instant Internet 100-S unit on any drywall, wood, or cement wall that is

at least 0.39 inches (10 mm) thick and is capable of supporting the combined weight of the unit and

attached cables (approximately 11 pounds or 5 kg).

A set of brackets, self-tapping (3.5x16) drywall screws, and (3x18) plastic expansion lugs (Figure 1)

has been included with the Instant Internet 100-S unit. You will need a Phillips screwdriver, which is

not included with the unit. If you are mounting the unit on a drywall or cement wall, you will need a

drill and a 1/4-inch drill bit, which are also not included with the unit. If you are mounting the unit

on a wood wall, you will need a #6 wood screw (not included) that is long enough to penetrate the

wood by at least 1/2-inch.

Figure 1 provides a template for you to use as a guide for placing the screws in the wall.

Figure 1 Template for correct placement of holes in the wall

To use this template:

1Trace the illustration onto another piece of paper.

2Cut out the tracing, making sure to cut out the holes provided for the screws.

3Place the tracing against the wall where you would like to mount the Instant Internet 100-S unit.

4Using a pencil, trace inside the holes that you have cut out to mark where the screws should go.

5Remove the tracing and place the screws where you have marked.

10119EA

*211487-A*

Preparing a drywall or a cement wall for mounting

To mount your Instant Internet 100-S on a drywall or cement wall, you must first prepare the wall.

To prepare a drywall or cement wall for mounting the Instant Internet 100-S unit:

1Use a drill and a 1/4-inch (0.63~0.65 mm) drill bit to drill four 1 1/16-inch (27.0 mm) deep holes

where you marked the wall with the template.

2Insert each of the plastic expansion lugs included with the unit into the four newly drilled holes.

3Repeat steps 1 & 2 for the other mounting bracket.

Mounting the Instant Internet 100-S on a wall

To mount the Instant Internet 100-S on a wood wall or a prepared drywall or cement wall:

1Place the bracket against the wall where you marked the wall with the template.

Align the holes in the bracket with the expansion lugs if you are mounting on a drywall or

cement wall.

2Insert each of the four screws through the holes in the bracket and into the wood wall or the

expansion lugs.

To mount your Instant Internet 100-S on a wood wall, use only wood screws; do not use the

plastic expansion lugs.

3Screw in the screws.

4Repeat steps 1, 2, & 3 for the other mounting bracket.

Figure 2 shows the components and illustrates the combined procedures for preparing a drywall or

cement wall and for mounting the unit on the wall.

Figure 2 Components for mounting the BayStack Instant Internet 100-S unit on a wall

For more information on mounting your BayStack Instant Internet 100-S unit, refer to Setting Up the

BayStack Instant Internet 100-S Unit (part number 209374-A).

LEGEND

1 Hole drilled in the wall 3 Wall mount bracket

2 Plastic expansion lug 4 Self-tapping drywall screw or #6 wood screw

10095EA

12 3 4

Andere Handbücher für BayStack 100-S

6

Inhaltsverzeichnis

Andere Nortel Netzwerk-Hardware Handbücher

Nortel

Nortel BayStack 100-S Service-Handbuch

Nortel

Nortel BayStack 650 Handbuch

Nortel

Nortel Meridian SL-100 Bedienungsanleitung

Nortel

Nortel 2340 Bedienungsanleitung

Nortel

Nortel HomeOffice II Bedienungsanleitung

Nortel

Nortel Meridian 1 Option 11C Compact Gebrauchs- und Pflegehandbuch

Nortel

Nortel Passport 8000 Series Montageanleitung

Nortel

Nortel Meridian Produkthandbuch

Nortel

Nortel 5000 Bedienungsanleitung

Nortel

Nortel IVR 2.5/S Bedienungsanleitung

Nortel

Nortel BayStack 100-S Bedienungsanleitung

Nortel

Nortel 2230l 2231 Bedienungsanleitung

Nortel

Nortel Norstar Compact Plus Bedienungsanleitung

Nortel

Nortel Optical Multiservice Edge 6130 Technisches Handbuch

Nortel

Nortel Passport 8683POS Leitfaden

Nortel

Nortel RLC Bedienungsanleitung

Nortel

Nortel SONET AccessNode Bedienungsanleitung

Nortel

Nortel R2MFC Bedienerhandbuch

Nortel

Nortel NAC Bedienungsanleitung

Nortel

Nortel Meridian 1 Option 11C Installations- und Betriebshandbuch

Nortel

Nortel Norstar ICS Stücklistenhandbuch

Nortel

Nortel BayStack 650 Bedienungsanleitung

Nortel

Nortel 2340 Bedienungsanleitung

Nortel

Nortel BayStack 600 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung