Nortel DMS-10 Bedienungsanleitung
DMS-10 and DMS-100 Families
Billing Media Converter II
Automatic Message Accounting Transmitter
1997 Quick Reference Guide
BMCA001 and up 02.01 Standard July 1997
297-6201-500
Your guide to:
• Maintenance commands
• Index Corruption Maintenance
• Replacement procedures
• PCA switch setting and jumper options
This Quick Reference Guide applies to all EMC chassis
(metal front door panels) Automatic Message Accounting
Transmitter (AMAT) style Billing Media Converter II (BMC II)
systems.
Other style BMC II systems cannot use this Quick
Reference Guide.
AMAT BMC II systems can be identified by the information
on their rear panel labels.
Catalog Number or Model Number:
NT8M0xxE (EMC Chassis models)
DMS-10 and DMS-100 Families
Billing Media Converter II
Automatic Message Accounting Transmitter
1997 Quick Reference Guide
Publication Number: 297-6201-500
Applicability: BMCA001 and up
Document Release: Standard 02.01
Date: July 1997
Copyright 1997, 1996 Northern Telecom
All rights reserved
Printed in the United States of America
Northern Telecom Confidential: The information contained in this
document is the property of Northern Telecom. Except as specifically
authorized in writing by Northern Telecom, the holder of this document shall
keep all information contained herein confidential and shall protect same in
whole or in part from disclosure and dissemination to third parties and use
same for evaluation, operation, and maintenance purposes only.
Information is subject to change without notice. Northern Telecom reserves
the right to make changes in design or components as progress in
engineering and manufacturing may warrant. The DMS-100 version of this
equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules, and the radio interference
regulations of the Canadian Department of Communications. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
DMS is a trademark of Northern Telecom.
iii
BMC II AMAT Quick Reference Guide
Publication history
May 1996 Standard 01.01.
First standard issue.
July 1997 Standard 02.01.
• Integrated the new Quick Reference Guide template into this document.
• Added the 1 and 2 GB disk drives to the BMC AMAT Front View figure
in BMC II AMAT Figures.
• Added DMS-10 and DMS-100 software and firmware files reference
tables to BMC II AMAT Figures.
• Modified Maintenance Commands with commands left out of first
issue:
— DELFILE f v1 v2
— LSTDIR ALL SORT
— LSTDIR FILE f v1 v2
— IDXMAINT DIR CLOSED t LAST v
— IDXMAINT DIR CLOSED t NEXT v
— IDXMAINT EXAMINE t HDR s
— IDXMAINT EXAMINE LOG DATE d
— IDXMAINT EXAMINE LOG HOUR x
— IDXMAINT EXAMINE LOG MSG n
— BX25PARM t
— BX25PARM t v
— BX25PARM PRIHDR
— BX25PARM PRIHDRx
— DMSO p aa
— DMSP xxxx
— SETTERM TIMEOUT
— SETTERM TIMEOUT x
— DELETE f v1:v2.
• Added notes concerning the necessity to execute the LINIT and SIT-
DAT WRITE commands after modification of the value of a command
in the CP Commands and Site Dependent Data Commands subsections
of the Maintenance Commands.
• Added a disk capacity and related number of total tracks available table
to the Disk Commands subsection of Maintenance Commands.
• Moved listing for VALPARM LOGHDR command from Site Data
Commands subsection to Testing Commands subsection of Maintenance
Commands.
• Added a CMD and STA code descriptions table to the TEC/DSI Com-
mands subsection of Maintenance Commands.
• Removed the Bus Terminator PCA from the list of valid PCAs in the
Miscellaneous PCA Replacement Procedure.
• Modified the Disk Drive Replacement Procedure section to support the
1 GB (Turbo and Non-Turbo) and 2 GB (Turbo only) disk drive systems
• Modified the BMC AMAT disk drive options table to reflect the proper
option settings for the 380 MB Non-Turbo disk drives and the new 1
and 2 GB disk drives in the Disk Drive Replacement Procedure.
iv
297-6201-500 BMCA001 and up Standard 02.01 July 1997
• Added notes regarding the location of the defect map and HEAD and
CYLINDERS out of range to step 9 of the Install replacement disk
drive procedure in the Disk Drive Replacement Procedure.
• Added note concerning the placement of the J5 jumper to step 8 of the
Disk Crossover PCA Replacement Procedure.
• Added the following to the PCA Switch and Strap Settings:
— CPU LED display codes table
— EPROM PCA table
— 56K Interface PCA table
— Disk Interface PCA table
— SCSI Interface PCA table
— DSI PCA table
— TEC PCA table.
• Modified statements in various sections concerning firmware to verify
filename and release level prior to installation of replacement PCA.
• Modified PCA options statements in various sections to refer to the
PCA Switch and Strap Settings to verify settings prior to installation.
• Modified the start-up activity steps of various sections to indicate that
Turbo BMC and Non-Turbo BMC with 1 GB disk drive users should
wait for the CP S/W Loaded message to print.
• Modified the command sequence used to clear alarms on the standby
processor in various sections.
• Corrected various minor format and content errors throughout the docu-
ment.
v
BMC II AMAT Quick Reference Guide
Contents
BMC II AMAT Figures 1
Maintenance Commands 7
Alarm Commands 7
Boot Commands 7
CP Commands 8
File Manipulations Commands 10
Index Maintenance Commands 11
Miscellaneous Commands 12
Polling Link Adjustment Commands 12
Processor Activity Command 13
Program Version Commands 13
Site Dependent Data Commands 13
Statistics Commands 16
System Clock Commands 16
TEC/DSI Function Commands 17
Testing Commands 17
User Security Commands 18
Monitor Level Commands 19
Guide to Index Corruption Recovery 21
Version number missing from index, but is on disk 21
Recognition 21
Recovery 23
Sequence numbers not incrementing properly 24
Recognition 24
Recovery 26
AMAIDX OPEN ERROR:03 28
Miscellaneous PCA Replacement Procedure
(NT6M60xx, NT6M62xx, NT6M63xx, NT6M64xx,
NT6M66xx, NT6M70xx, NT6M89xx, or
NT6M90xx) 31
Disk Replacement Procedure 35
Removing the Faulty Disk Drive 35
Installing the Replacement Disk Drive 36
Disk Crossover PCA Replacement Procedure
(NT6M72xx/6M93xx) 41
Error Control II PCA Replacement Procedure
(NT6M65xx) 45
Error Control II Jumper PCA Replacement
Procedure (NTM609xx) 47
vi
297-6201-500 BMCA001 and up Standard 02.01 July 1997
Power and Alarm Communications PCA
Replacement Procedure (NT6M84xx) 49
56K Crossover PCA Replacement Procedure
(NT6M48xx) 51
Power Supply Replacement Procedure
(NT6M71xx) 53
56K Interface PCA Replacement Procedure
(NT6M94xx) 57
PCA Switch and Strap Settings 61
List of Figures
BMC II AMAT Front View 1
DMS-10 Non-Turbo with 5 1/4” disk drives - Side View 2
DMS-10 Turbo (any) or Non-Turbo with 3 1/2” disk drives -
Side View 2
DMS-100/DCO Non-Turbo with 5 1/4” disk drives - Side
View 3
DMS-100 Turbo (any) or Non-Turbo with 3 1/2” disk drives -
Side View 3
Version number missing 22
Version number recovered 23
Sequence numbers not incrementing 25
Sequence numbering corrected 26
List of Procedures
Miscellaneous PCA replacement 31
Remove faulty disk drive 35
Install replacement disk drive 37
Disk Crossover PCA replacement (NT6M72xx or
NT6M93xx) 41
Error Control II PCA (NT6M65xx) replacement 45
Error Control II Jumper PCA (NTM609xx) replacement 47
Power and Alarm Communications PCA (NT6M84xx)
replacement 49
56K Crossover PCA (NT6M48xx) replacement 51
Power Supply (NT6M71xx) replacement 53
56K Interface PCA (NT6M94xx) replacement 57
Miscellaneous PCA replacement 29
Remove faulty disk drive 33
Install replacement disk drive 35
Disk Crossover PCA replacement (NT6M72xx or
NT6M93xx) 39
Error Control II PCA (NT6M65xx) replacement 43
Error Control II Jumper PCA (NTM609xx) replacement 45
Power and Alarm Communications PCA (NT6M84xx)
replacement 47
56K Crossover PCA (NT6M48xx) replacement 49
Power Supply (NT6M71xx) replacement 51
56K Interface PCA (NT6M94xx) replacement 55
vii
BMC II AMAT Quick Reference Guide
List of Tables
DMS-10 BMC AMAT software and firmware files 4
DMS-100 BMC AMAT software and firmware files 5
DCO BMC AMAT software and firmware files 6
Disk drive size and related number of tracks 10
Valid status values for CMD and STA bytes 17
Disk drive options 36
NT6M62xx CPU PCA 61
CPU LED display codes 61
NT6M63CA EPROM PCA 62
NT6M63CK, NT6M63DA, NT6M63DC, NT6M63FI, and
NT6M63FL EPROM PCA 63
NT6M60BA Quad SIO (Slot 6), BMC set to INTERNAL timing
and Polling Modem set to EXTERNAL timing 63
NT6M60BAQuadSIO(Slot 6),BMC setto EXTERNALtiming
and Polling Modem set to INTERNAL timing 64
NT6M60BA PTR SIO (Slot 7), BMC set to INTERNAL timing
and Polling Modem set to EXTERNAL timing 64
NT6M60BA PRT SIO (Slot 7), BMC set to EXTERNAL timing
and Polling Modem set to INTERNAL timing 65
Baud Rate Reference 65
NT6M84BA PWR/ALM Communications PCA, BMC set to
INTERNALtimingandPollingModemsettoEXTERNAL
timing 66
NT6M84BA PWR/ALM Communications PCA, BMC set to
EXTERNALtimingandPollingmodemsettoINTERNAL
timing 66
NT6M94xx 56K Interface PCA 67
NT6M66AC (MD) or NT6M66AH Disk Interface PCA 67
NT6M66BA SCSI Interface PCA 67
NT6M70AB DMS-100 DSI PCA 68
NT6M70BD DMS-100 DSI PCA 69
NT6M89AA DMS-10 TEC PCA 70
NT6M89AB and NT6M89BD DMS-10 TEC PCA 70
NT6M90xx 800 bpi DCO TEC PCA 71
NT6M90xx 1600 bpi DCO TEC PCA 72
viii
297-6201-500 BMCA001 and up Standard 02.01 July 1997
Andere Handbücher für DMS-10
3
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Nortel Telefonsystem Handbücher
Nortel
Nortel DMS-100 Series Bedienungsanleitung
Nortel
Nortel 2245 Bedienungs- und Wartungsanleitung
Nortel
Nortel Meridian 1 Option 11C Bedienungsanleitung
Nortel
Nortel Meridian Meridian 1 Stücklistenhandbuch
Nortel
Nortel DCT1900 Bedienungsanleitung
Nortel
Nortel DMS-100 Series Bedienungsanleitung
Nortel
Nortel Companion MICS-XC Bedienungsanleitung
Nortel
Nortel ICS 7.1 Bedienungsanleitung
Nortel
Nortel BCM50 Produkthandbuch
Nortel
Nortel BCM50 Bedienerhandbuch
Nortel
Nortel North American DMS-100 Bedienungsanleitung
Nortel
Nortel BCM50 Bedienerhandbuch
Nortel
Nortel Business Communications Manager 2.5 Betriebsanleitung
Nortel
Nortel BCM1000 Produkthandbuch
Nortel
Nortel Meridian Meridian 1 Bedienungs- und Montageanleitung
Nortel
Nortel Meridian 1 Option 11C Bedienungsanleitung
Nortel
Nortel BCM50 Bedienungsanleitung
Nortel
Nortel BCM50 Installationsanleitung
Nortel
Nortel BCM50 Bedienungsanleitung
Nortel
Nortel Meridian Meridian 1 Gebrauchsanweisung
