Nortel Enterprise Edge M7208 Stücklistenhandbuch

P0908512 Issue 01

Enterprise Edge

M7208

User Card

Page 1 Enterprise Edge M7208 User Card

Your Enterprise Edge M7208 telephone

Using Key Inquiry Check what is programmed on your memory keys.

1. Release all calls or lines with dial tone.

2. Press ƒ•‚.

3. Press the key(s) that you want to check.

4. Read the display.

5. Press ƒwhen finished.

Adjusting display

contrast 1. Press ƒ•‡.

2. Press ⁄to ·on the key pad for the contrast level you want; the

higher the number the higher the contrast level.

Selecting a ring

type and volume

level

1. Press ƒ•ﬂ.

2. Press ⁄, ¤, ‹or ›to hear the different ring types.

3. While the telephone is ringing, press √to adjust the

volume level.

4. Press ƒto store the ring.

Adjusting the

handset or

telephone

speaker volume

1. Press √when using the handset or the speaker.

Display

shows the time, date, call information, and guides you.

Indicators

appear beside lines and features.

Feature button

starts or ends a feature.

Release button

cancels active calls.

Hold button

Dial pad

Volume control

Memory and line buttons

are buttons with indicators for one

touch dialing, feature operation

or line access.

Page 2 Enterprise Edge M7208 User Card

Making and answering calls

Answering calls Answering calls using the handset

When your telephone rings, or ºflashes beside an Intercom or line key:

1. Lift the handset.

Press the key beside the flashing ºbefore lifting the handset.

Answering calls using Handsfree

When your telephone rings, or ºflashes beside an Intercom or line key:

1. Press ©.

Making calls Depending upon the dialling mode programmed on your telephone, you may

have to lift the handset before making a call.

¬External calls using numbered line keys

1. If you do not have an external Prime line, press a line key.

2. Dial your call.

∆External calls using Intercom keys

1. Lift the handset.

2. If ºappears beside an Intercom key, enter a line pool access code.

Press an Intercom key without º, then enter a line pool access code.

3. When you hear external dial tone, dial your call.

Internal calls using Intercom keys

1. If you do not have an internal Prime line, press ∆.

2. Dial your call.

Note: Line pool access codes and extension numbers are supplied by your

System Administrator.

Making calls using Handsfree

1. Press ©instead of lifting the handset.

˙Holding Calls

1. Press ˙.The ºflashes beside the line on hold.

2. Press the line key with the flashing ºto return to the call.

Automatic hold

Calls are put on hold automatically when you switch from one line to another.

Exclusive hold

Use Exclusive Hold (ƒ˙) to keep a call on hold so that it

can be retrieved only at your telephone.

©System Administrator can program Handsfree for your telephone.

Switching between Handsfree and handset

1. Press ©and replace the handset to switch to Handsfree.

2. Pick up the handset to switch back.

Using Mute

1. Press ©to turn the microphone OFF.

2. Press ©again to turn the microphone ON.

Page 3 Enterprise Edge M7208 User Card

Programming memory keys

Remember: Press ƒ•‚ to check a memory or line key.

Programming

memory keys External Autodial

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•⁄.

3. Press a memory key.

4. Dial the external number.

5. Press ˙to store the number.

6. Label your new key.

Internal Autodial

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•¤.

3. Press a memory key.

4. Dial the extension number.

5. Label your new key.

Features

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•‹.

3. Press a memory key.

4. Press ƒand the feature code.

5. Label your new key.

Erasing memory keys

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•⁄.

3. Press the memory key you want to erase.

4. Press ˙to erase the key.

About memory keys

Memory keys are the keys with

indicators other than line or

Handsfree keys. Memory keys

store telephone numbers or

feature codes to give you one-

touch dialling or feature

activation. You can change what

a memory key does by just

programming it with a new

number or feature. You cannot

program a line or Handsfree key.

Page 4 Enterprise Edge M7208 User Card

Setting up the telephone

Notice These telephones now conform to the latest standards in relation to the

positioning of Q and Z on the number keys. The Q appears on key

number 7 and the Z appears on key number 9.

Connecting the cords ATTENTION Before attempting to

carry out any work on the telephone,

ensure that the line cord is unplugged

from the wall socket.

To remove any of the cords, squeeze

the release latch on the plug and gently

pull the plug from the socket.

Connect the handset cord to the jack

labelled with the telephone icon and

route the cord as shown.

If you are using a headset, route the

cord along the channel in the base and

connect the cord to the telephone jack

that is marked with the headset icon.

Route the line cord through the stand

and connect the cord to the telephone

jack that is marked with the jack icon.

Attach the stand using either pair of

slots; to raise the back of the telephone

to its highest position, use these slots.

Once the above work is complete, plug

the line cord back into its wall socket.

Connect to jack

from distribution block

Connect to receiver

Page 5 Enterprise Edge M7208 User Card

Setting up the telephone

Mounting the

telephone on

the wall

Page 5 Enterprise Edge M7208 User Card P0908512 Issue 01

Inhaltsverzeichnis

Andere Nortel Telefon Handbücher

Nortel

Nortel Call Center Telephone Einrichtungshandbuch

Nortel

Nortel M2016S Secure Set Bedienungsanleitung

Nortel

Nortel Meridian Meridian 1 Bedienungsanleitung

Nortel

Nortel MERIDIAN 1 M2216ACD Bedienungsanleitung

Nortel

Nortel Industrial Handset Bedienungsanleitung

Nortel

Nortel Vista 100 Handbuch

Nortel

Nortel NORSTAR M7324 Stücklistenhandbuch

Nortel

Nortel Norstar T7316E Bedienungsanleitung

Nortel

Nortel 2001 Referenzhandbuch

Nortel

Nortel NORSTAR M7324 Bedienungsanleitung

Nortel

Nortel Enterprise Edge M7208 Bedienungsanleitung

Nortel

Nortel M2216ACD Bedienungsanleitung

Nortel

Nortel NN43001-504 Bedienungsanleitung

Nortel

Nortel DMS-100 Series Bedienungsanleitung

Nortel

Nortel Norstar Bedienungsanleitung

Nortel

Nortel Meridian 9417 Bedienungsanleitung

Nortel

Nortel M760 Bedienungsanleitung

Nortel

Nortel BCM50 3.0 Bedienungsanleitung

Nortel

Nortel M 7000 Stücklistenhandbuch

Nortel

Nortel Meridian M2006 Abmessungen

Nortel

Nortel Norstar M7100 Bedienungsanleitung

Nortel

Nortel i2004 Bedienungsanleitung

Nortel

Nortel Enterprise Edge M7324N Stücklistenhandbuch

Nortel

Nortel Business Series Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung