Nortel Enterprise Edge M7324N Stücklistenhandbuch

P0908520 Issue 02

Enterprise Edge

M7324N

User Card

Page 1 Enterprise Edge M7324N User Card

Your Enterprise Edge M7324N Telephone

Using Button

Inquiry Check what is programmed on your memory buttons.

1. Release all calls or lines with dial tone.

2. Press ƒ•‚.

3. Press the button(s) that you want to check and read the display.

4. Press ƒ when finished.

Adjusting display

contrast 1. Press ƒ•‡.

2. Press UP or DOWN for the level you want.

3. Press OK when finished.

Selecting a ring

type and volume

level

1. Press ƒ•ﬂ.

2. Press ⁄, ¤, ‹, ›, or NEXT to hear the different ring types.

3. While the telephone is ringing, press √to adjust the volume

level.

4. Press OK

to store the volume level and ring.

Mounting the

telephone The M7324N telephone can be placed on any level surface. It cannot be

wall-mounted.

Using display buttons Three display buttons appear directly below

the display. When they are active, these

buttons are labelled in capital letters on the

bottom line of the display. In Enterprise Edge

documents, display buttons are shown as

underlined, capital letters: for example, OK.

Display

shows the time, date, and call information; guides you while

using features; tilts for easy viewing. The lower line of the display

is reserved for display button instructions.

Display buttons

Release button cancels active calls

Dial pad

Volume control

Memory and line buttons

are buttons with labels for

one-touch dialing, feature

operation, or line access.

Hold button

Indicators

appear beside active

lines and features.

Feature button

starts or ends a feature.

Page 2 Enterprise Edge M7324N User Card

Making and answering calls

Answering calls Answering calls using the handset

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Lift the handset.

Press the button beside the flashing ºbefore lifting the handset.

Answering calls using Handsfree

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Press ©.

Making calls Depending upon the dialing mode programmed on your telephone, you may

have to lift the handset before making a call.

¬External calls using numbered line buttons

1. If you do not have an external Prime line, press a line button.

2. Dial your call.

∆External calls using Intercom buttons

1. Lift the handset.

2. If ºappears beside an Intercom button, enter a line pool access code.

Press an Intercom button without º, then enter a line pool access code.

3. When you hear external dial tone, dial your call.

Internal calls using Intercom buttons

1. If you do not have an internal Prime line, press ∆.

2. Dial your call.

Note: Line pool access codes and extension numbers are supplied by your

System Administrator.

Making calls using Handsfree

1. Press ©instead of lifting the handset.

˙Holding Calls

1. Press ˙.The ºflashes beside the line on hold.

2. Press the line button with the flashing ºto return to the call.

Automatic hold

Calls are put on hold automatically when you switch from one line to another.

Exclusive hold

Use Exclusive Hold (ƒ˙) to keep a call on hold so that it can be

retrieved only at your telephone.

©This button operates your telephone’s built-in microphone and speaker. Your

System Administrator can program Handsfree for your telephone.

Switching between Handsfree and handset

1. Press ©and replace the handset to switch to Handsfree.

2. Pick up the handset to switch back.

Using Mute

1. Press ©to turn the microphone OFF.

2. Press ©again to turn the microphone ON.

Page 3 Enterprise Edge M7324N User Card

Programming memory buttons

Remember: Press ƒ•‚ to check a memory or line button.

Programming

memory buttons External Autodial

1. If you are on a call or a line with dial tone, press ˙or®.

2. Press ƒ•⁄.

3. Press a memory button.

4. Dial the external number.

5. Press OK to store the number.

6. Label your new button.

Internal Autodial

1. If you are on a call or a line with dial tone, press ˙or®.

2. Press ƒ•¤.

3. Press a memory button.

4. Dial the extension number.

5. Label your new button.

Features

1. If you are on a call or a line with dial tone, press ˙ or ®.

2. Press ƒ•‹.

3. Press a memory button.

4. Press ƒand the feature code.

5. Label your new button.

Erasing memory buttons

1. If you are on a call or a line with dial tone, press ˙ or®.

2. Press ƒ•⁄.

3. Press the memory button you want to erase.

4. Press OK to erase the button.

About memory

buttons Memory buttons are the buttons with

labels other than line or Handsfree

buttons. Memory buttons store

telephone numbers or feature codes to

give you one-touch dialling or feature

activation. You can change the function

of a memory button by programming it

with a new number or feature.

If you have programmed a memory

button with an extension number, the

indicator comes on when the number is

busy.

Page 4 Enterprise Edge M7324N User Card

Setting up the telephone

Notice These telephones now conform to the latest standards in

relation to the positioning of Q and Z on the number buttons.

The Q appears on button number 7 and the Z appears on

button number 9.

ATTENTION Before attempting to carry

out any work on the telephone, ensure

that the line cord is unplugged from the

wall socket.

To remove any of the cords, squeeze the

release latch on the plug and gently pull

the plug from the socket.

Connect the handset cord to the jack

labelled with the telephone icon and

route the cord as shown.

If you are using a headset, route the

cord along the channel in the base and

connect the cord to the telephone jack

that is marked with the headset icon.

Route the line cord through the stand

and connect the cord to the telephone

jack that is marked with the jack icon.

Attach the stand using either pair of

slots; to raise the back of the telephone

to its highest position, use these slots.

Once the above work is complete, plug

the line cord back into its wall socket.

Connecting the cords

Press here to

remove the stand.

Press here firmly

until it clicks, to

attach the stand.

Page 4 Enterprise Edge M7324N User Card P0908520 Issue 02

Inhaltsverzeichnis

Andere Nortel Telefon Handbücher

Nortel

Nortel Enterprise Edge Prime Stücklistenhandbuch

Nortel

Nortel M7100N Stücklistenhandbuch

Nortel

Nortel DMS-100 Series Bedienungsanleitung

Nortel

Nortel 3050 Bedienungsanleitung

Nortel

Nortel NorStar M7310 Bedienungsanleitung

Nortel

Nortel Telephone Bedienungsanleitung

Nortel

Nortel CallPilot 100 Einrichtungshandbuch

Nortel

Nortel Meridian M5312 Bedienungsanleitung

Nortel

Nortel T Series Bedienungsanleitung

Nortel

Nortel T7316 Stücklistenhandbuch

Nortel

Nortel T7208 Stücklistenhandbuch

Nortel

Nortel Nortel IP Phone 1120E Bedienungsanleitung

Nortel

Nortel M3905 Bedienungsanleitung

Nortel

Nortel i2002 Bedienungsanleitung

Nortel

Nortel i2002 Stücklistenhandbuch

Nortel

Nortel Compact DR5 Stücklistenhandbuch

Nortel

Nortel Norstar T7316E Stücklistenhandbuch

Nortel

Nortel M2216ACD Bedienungsanleitung

Nortel

Nortel Enterprise Edge Feature Programming... Bedienungsanleitung

Nortel

Nortel Remote Office 9150 Bedienungsanleitung

Nortel

Nortel Call Center Telephone Einrichtungshandbuch

Nortel

Nortel Call Center Telephone Einrichtungshandbuch

Nortel

Nortel 3902 Bedienungsanleitung

Nortel

Nortel 7100 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung