North Star 49436 Bedienungsanleitung

SAVE THESE INSTRUCTIONS

32 Inch Surface Cleaner

Owner’s Manual

WARNING: Read and understand all instructions, warnings, and cautions before using this

product. Failure to follow the instructions, warnings, and cautions may result in serious personal

injury and/or property damage.

Item #49436

Page 2 of 16

Thank you very much for choosing a Northstar product!

For future reference, please complete the owner’s record below:

Serial Number/Lot Date Code: ________________________________

Purchase Date: ____________________________________________

Save the receipt, warranty, and this manual.

This surface cleaner is designed for certain applications only Northern

Tool and Equipment cannot be responsible for issues arising from

modification or use of this product in applications for which it was not

designed. We strongly recommend that this product not be modified

and/or used for any application other than that for which it was designed.

For technical questions, please call 1-800-222-5381.

Page 3 of 16

Table of Contents

Intended Use..........................................................................................................................................4

Technical Specifications......................................................................................................................4

Important Safety Information...............................................................................................................4

Specific Operation Warnings...............................................................................................................6

Assembly ...............................................................................................................................................7

Before Each Use....................................................................................................................................9

Operating Instructions..........................................................................................................................9

After Each Use.......................................................................................................................................9

Maintenance ........................................................................................................................................10

Replace the Hose...........................................................................................................................10

Replace a Nozzle............................................................................................................................10

Replace the Swivel Complete Fixture.............................................................................................11

Replace the Swivel Filter................................................................................................................12

Replace the Swivel O Rings...........................................................................................................12

Parts Diagram......................................................................................................................................13

Parts List..............................................................................................................................................14

Troubleshooting..................................................................................................................................15

Replacement Parts..............................................................................................................................15

Page 4 of 16

Intended Use

This surface cleaner is designed for high-pressure cleaning of a variety of outdoor surfaces such as

concrete, asphalt, paving stone walkways pool and boat decks etc.An included lance can be used to

clean hard-to-reach areas. The cleaner connects to a pressure washer and is rated up to 5000 PSI

with 8 GPM with fluid temperatures up to 200º F.

Technical Specifications

Property

Description

Cleaning Width (in)

Max. PSI

5000

GPM

Material

Stainless-steel

Caster Type

Swivel

Temperature Capacity (°F)

200

Weight

55 lbs.

Important Safety Information

Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. It will

do the job better and more safely at the capacity for which it was intended. DO NOT use this

equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.

Page 5 of 16

WORK AREA SAFETY

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to other cutting tools and rotating parts.

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the

presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite

the flammable liquids, gases, or dust.

Do not allow the product to come into contact with an electrical source. The tool is not insulated

and contact will cause electrical shock.

Keep children and bystanders away from the work area while operating the tool. Do not allow

children to handle the product.

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your

work area. Some of these hazards may be hidden from your view and may cause personal injury

and/or property damage if contacted.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not

use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment

of inattention while operating the tool may result in serious personal injury.

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving

parts. Air vents on the tool often cover moving parts and should be avoided.

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant

safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust

mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection

systems, and hearing protection when appropriate. This applies to all persons in the work area.

Do not overreach. Keep proper footing and balance at all times.

Do not use the tool when tired or under the influence of drugs, alcohol or medication.

Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on

the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal

injury.

Secure the work with clamps or a vise instead of your hand when practical. This safety precaution

allows for proper tool operation using both hands.

Page 6 of 16

CLEANER USE AND CARE

Do not force the cleaner. Tools do a better and safer job when used in the manner for which they

are designed. Plan your work, and use the correct tool for the job.

Check for damaged parts before each use and before connecting the cleaner to a pressure

washer. Carefully check that the cleaner will operate properly and perform its intended function.

Replace damaged or worn parts immediately. Never operate the cleaner with a damaged part.

Store the cleaner when it is not in use. Store it in a dry, secure place out of the reach of children.

Inspect the cleaner for good working condition prior to storage and again before re-use.

Use only replacement parts that are recommended by the distributor. Parts that may be suitable

for one cleaner may create a risk of injury when used with another cleaner. Never use a part that

has a lower operating pressure than the cleaner itself.

Do not leave the cleaner unattended when it is pressurized.

Do not turn the cleaner over when it is pressurized by connection to an operating pressure

washer to avoid high-pressure spraying water that could cause personal injury.

Specific Operation Warnings

DO NOT exceed the rated PSI capacity.

Keep body parts clear of nozzle heads and away from skirt while operating machine.

DO NOT lift machine from surface or point nozzle heads at people while operating.

Wear the proper safety gear including ANSI Z87.1 approved safety glasses.

Use only on hard level surfaces.

No altercations shall be made to this product.

Only attachments and/or adapters supplied by the manufacturer shall be used.

Not for use by or around children.

Page 7 of 16

Assembly

1. Check the contents of the shipping carton against the parts list to ensure all parts are present.

2. Attach the twin front casters to the housing as shown below. After tightening the bolts check that

the casters swivel and the wheels turn smoothly.

3. Attach the swivel complete fixture to the center hole of the housing (this may already be done at

the factory). Push the fixture up from underneath the housing and attach the large screw.

4. Place each wheel on the axle and secure them by the collars.

Page 8 of 16

5. Insert the handlebar into the frame and secure it using the bolts (18) and spring clips (13).

6. Connect the bottom of the hose to the swivel piping (shown below, left) and the top to the

connection at the gun (17).

The quick-release

coupling at the

gun can be

connected to the

lance for hard-to-

reach areas.

Release the

quick coupling

between the gun

and hose then

attach the gun to

the lance, if

needed.

Page 9 of 16

Before Each Use

Perform the following inspections before each to ensure the cleaner is working properly.

Check for any worn or damaged parts. Replace any such part before using the cleaner.

Check that all the parts are tightly fastened. Tighten any that are loose.

Check that the casters swivel and roll smoothly. Repair or replace any that don’t function

properly.

Check that the swivel and sprayer arm rotate smoothly.

Use a low-pressure water connection to check that the sprayer nozzles are clear and spray

correctly. If any nozzle doesn’t, replace or clean the non-working nozzle (see maintenance

section for the steps).

Operating Instructions

1. After before-use inspections, place the cleaner at the edge of the surface to clean.

2. Bring a pressure washer to the area.

Do not use the surface cleaner with a pressure washer that has a fluid delivery greater than 5000 PSI

or 8 GPM and 200º F. Fluid delivery above these parameters may overload the cleaner and cause

damage to components and possibly personal injury.

3. Connect the surface cleaner gun to the pressure washer hose.

4. With one hand on the surface cleaner handle, start the pressure washer.

Do not tilt the surface cleaner up off any of the wheels or casters while in use. The operating pressure

is very high and wildly spraying fluid can easily cause personal injury and property damage.

5. Slowly walk behind the surface cleaner watching for good cleaning action. Use the lance for

hard-to-reach areas. WARNING: Turn off the pressure washer and release pressure before

converting between the gun and lance connections to the washer to avoid injury from the high-

pressure fluid.

6. When cleaning is complete, stop the pressure washer. When fluid pressure is released through

the sprayer nozzles, disconnect it from the surface cleaner.

After Each Use

Perform the following inspections after each use to clean the cleaner and ready it for the next use.

Clean out any dirt or foreign material from under the housing, wheels, and casters. If necessary,

use a cloth or sponge to wash the surface cleaner and rinse it with tap water.

Check for loose parts and any damage.

Page 10 of 16

Maintenance

Disconnect the surface cleaner from a pressure washer and ensure that the cleaner is not pressurized

before performing any inspections, maintenance or adjustments to avoid any wildly spraying fluid that

may cause personal injury and property damage.

Maintain your tool in good repair by adopting a program of conscientious repair and maintenance in

accordance with the recommended procedures found in this manual.

For general inspections, see the Before Each Use section.

Replace the Hose

Disconnect the bottom of the hose from the swivel piping and the top from the gun, as shown below,

then reconnect a new hose to these connections.

The Hose-Swivel Connection

Replace a Nozzle

To replace a clogged, worn, or damaged nozzle, simply unscrew it from the sprayer and screw on a

new or cleaned replacement nozzle.

Plugged nozzles can be easily cleaned with a needle or small paper clip.

Inhaltsverzeichnis

Andere North Star Ultraschall-Schmuckreiniger Handbücher

North Star

North Star 63594 Bedienungsanleitung

Beliebte Ultraschall-Schmuckreiniger Handbücher anderer Marken

Kränzle

Kränzle Round Cleaner 300 INOX Leitfaden

RIDGID

RIDGID 36023 Bedienungsanleitung

JOCCA

JOCCA 1249 Bedienungsanleitung

Kärcher

Kärcher FC 7 Cordless Bedienungsanleitung

Kärcher

Kärcher SB OB Bedienungsanleitung

Connoisseurs

Connoisseurs SafeWave LaSonic Bedienungsanleitung

Laser

Laser 6166 Bedienungsanleitung

poolstar

poolstar NetSpa Super Vac Bedienungsanleitung

Hammerhead

Hammerhead DCFSCP18 Bedienungsanleitung

Rothenberger

Rothenberger RODIA 1600 Bedienungsanleitung

Hedson

Hedson DRESTER X Series Bedienungsanleitung

ETEKCITY

ETEKCITY CD-2800 Bedienungsanleitung

RCBS

RCBS 87006 Merkblatt

Ryobi

Ryobi P2905 Bedienungsanleitung

Ryobi

Ryobi PBLHV704 Bedienungsanleitung

IPC

IPC Combo-C PW-C80 Bedienungsanleitung

Kärcher

Kärcher WRP 1000 Classic Bedienungsanleitung

Makita

Makita DCL280F Bedienungsanleitung