Notifier ID50 SERIES Bedienungsanleitung

ID50/60 operating

manual

997-264-000-8, Issue 8 January 2007

ID50 Series Panel - Operating Manual

Contents

i 997-264-000-8, Issue 8

January2007

Contents

1 Introduction 1

1.1 Associated Documents 1

1.2 The ID50 / ID60 Series Panel 1

1.2.1 Device Type Abbreviations 2

1.3 Cleaning 2

2 Panel Controls and Indicators 3

2.1 Controls 3

2.2 Indicators 4

3 Automatic Alarms - What to do 5

3.1 Fire 5

3.1.1 Fire in Delayed Mode 7

3.2 Pre-alarm 8

3.3 Fault 9

3.2.1 Power Fail 10

3.3 Plant Alarm 11

4 Operator Actions at Panel 12

4.1 Introduction 12

4.1.1 Liquid Crystal Display 12

4.1.2 InternalBuzzer 13

4.1.3 Access Codes 13

4.1.4 Keyswitch 14

4.2 MUTE BUZZER Pushbutton 14

4.3 EXTEND DELAY Pushbutton 14

4.4 END DELAYS/EVACUATE Pushbutton 15

4.5 SILENCE/RESOUND Pushbutton 16

4.6 RESET Pushbutton 17

4.7 Numeric Keys 18

4.7.1 Cancellation/Termination Button 18

4.7.2 Level 2 Options Menu Button 18

4.8 Level 2 Option Menus 19

4.9 TEST - User Option 20

4.9.1 LEDs - User Option 21

4.9.2 LCD - User Option 21

4.9.3 Zones - User Option 22

4.9.4 Auto High Test - User Option 24

4.9.5 Outputs - User Option 25

ID50 Series Panel - Operating Manual

Contents

ii997-264-000-8, Issue 8

January2007

4.9.6 Buzzer - User Option 27

4.9.7 Keyboard - User Option 27

4.10 DISABLE / ENABLE - User Option 28

4.10.1 Zones - User Option 28

4.10.2 Outputs - User Option 31

4.10.3 Day Mode - User Option 32

4.10.4 Delays - User Option 33

4.11 CLOCK - User Option 34

4.11.1 Time - User Option 35

4.11.2 Date - User Option 36

4.12 VIEW MODE - User Option 37

4.12.1 Log - User Option 38

4.12.2 Devices - User Option 39

4.12.3 Faults - User Option 40

4.12.4 Input Events - User Option 41

4.12.5 Disabled - User Option 42

4.12.6 Alarm Count - User Option 42

4.12.7 Voltages - User Option 43

4.12.8 Version - User Option 44

4.13 Commissioning 44

4.14 Print 44

Appendix 1 - Log Book A1-1

Appendix 2 - Maintenance A2-1

Appendix 3 - ID60 Single Loop Panel

Differences A3-1

ID50 Series Panel - Operating Manual

Contents

iii 997-264-000-8, Issue 8

January2007

ID50 Series Panel

ID50 Series Panel - Operating Manual

Introduction

1 997-264-000-8, Issue 8

January2007

1 Introduction

This manual contains operating instructions for the ID50

and ID60 Series Fire Detection Panels. Differences

between the ID50 and ID60 panels are given in

Appendix 3.

Users of this manual are assumed to be working with a

panel that has already been installed and configured

appropriately for the area under its supervision.

1.1 Associated Documents

This manual does not describe the installation or

configuration procedures of the panel. For information

on these topics, refer to the ID50 Series

Panel - Installation, Commissioning and

Configuration Manual (Ref. 997-263-000-X).

1.2 The ID50/ ID60 Series Panel

Thepanel,assupplied by NOTIFIER,isa 1-loop, 16-zone

Analogue Addressable Panel. The single loop has the

capacity for up to 99 analogue sensors plus up to 99

modules and, in some installations, panels may also be

connectedto repeatersusingtheRS485Communications

Link.

All the control and operation functions described in this

manual can be carried out using the pushbuttons on the

front of the panel.

A keyswitch is provided which, when set to the right, has

thesame effectas enteringan access 2 passcode.Set it

to the centre to cancel out of all menus and return to the

Status: NORMAL display. This indicates access level 2

is de-selected.

ID50 Series Panel - Operating Manual

Introduction

2997-234-000-8, Issue 8

January2007

1.2.1 Device Type Abbreviations

Throughout this manual the panel may refer to devices

by an abbreviated name. The following table lists the

device type abbreviation and its description.

Abbreviation Type Description

AUX Plant Warning Input

AVR* Advanced VIEW™ Reference*

AVS* Advanced VIEW™ Sensor*

CTE Monitored (Relay Type) Output (VdS)

CTL Monitored (Relay Type) Output

ESE Extinguishant System Output (VdS)

ESM Extinguishant System

ESO Monitored Extinguishing System Output

EST Extinguishant Monitor System Trigger

ION Ionisation Smoke Detector

IRL Immediate Release Input

MCP† Manual Call Point†

MLT Advanced Multi Sensor

MNS Monitor module (no short-circuit)

MON Fire Alarm Monitor Input

MRL Manual Release Input

OPT Optical/Photo-electric Smoke Detector

OPX Optiplex Multi-sensor

RLE Unmonitored(RelayType)orO/COutputs(VdS)

RLY Unmonitored(RelayType)orO/COutputs

SDR Monitored (Sounder Type) Output

SM4* SMART Multi-criteria Sensor*

TMP Temperature Detector

TxD MonitoredTransmissionRoutingOutput

ZMX Conventional Detector Input

Note: Devices marked ‘*’ are supported by the ID60

Panel only. The Device marked ‘†’ is also

available as ‘DKM’ - not used in this application

(provided to be compatible with VdS

requirements).

1.3 Cleaning

The panel case may be cleaned periodically by wiping

with a soft, damp lint-free cloth.

Do not use solvents.

ID50 Series Panel - Operating Manual

Panel Controls & Indicators

3 997-264-000-8, Issue 8

January2007

2 Panel Controls and Indicators

The panel’s controls and indicators are used to operate

theoverall system anddisplaythe panelstatus.The panel

hasfive functionpushbuttons,twelve numeric/cursorkeys

andthirty-twozonalLEDindicators,two‘FIRE’indicators

and fourteen system status LED indicators.

An access level 2 keyswitch is provided to enable the

operation of panel controls and access to user menus

without entering a passcode via the numeric keypad.

2.1 Controls

The pushbuttons are listed below, together with

references to the relevant sections of the manual:

Function Pushbuttons

•MUTE BUZZER - (Section 4.2).

•EXTEND DELAY - (Section 4.3).

•END DELAY/EVACUATE1- (Section 4.4)

•SILENCE/RESOUND - (Section 4.5).

•RESET - (Section 4.6).

1Also configurable as Transmission Device (TD)

Enable/Disable.

Numeric/Cursor Keys

•Numeric/Cursor keys - (Section 4.7).

Keyswitch

Turn the keyswitch to enable level 2 access. The

keyswitch provides an alternative to entering the level 2

access code via the numeric keys. See Section 4.1.3

and Section 4.1.4.

ID50 Series Panel - Operating Manual

Panel Controls & Indicators

4997-264-000-8, Issue 8

January2007

2.2 Indicators

The panel status indicators comprise three groups:

a. Zone Status LED indicators.

b. Panel/System LED indicators.

c. Visible/Audibleindicators.

Zone Status LED Indicators

•ZONE FIRE - these LEDs indicate affected zone(s).

•ZONE FAULT/DISABLE/TEST - these LEDs indicate

affected zone(s).

Panel/System LED Indicators

•FIRE - these LEDs indicate a fire condition.

•Other System Status LEDs:

FAULT indicates a fault has been

detected by the panel.

DISABLEMENT indicates the presence of a

manually-configured

disablement.

TEST indicatesatest is in progress.

DELAYACTIVE indicates delays are active.

FIRE OUTPUTACTIVEindicates fire outputs have

been operated.

PRE-ALARM1indicates a pre-alarm

condition exists.

POWER indicates status of power

supply.

SYSTEM FAULT indicates the CPU has reset

orasystemfaulthasoccurred.

EARTH FAULT indicates an earth fault has

occurred.

PLANTALARM2indicates a fault or warning

fromaplant-monitoringdevice.

FIRE CONTROL O/P: FAULT/DISABLED

indicates a fire control output

fault or disablement.

FIRE OUTPUT: FAULT/DISABLED

indicates a fire output fault or

disablement

SOUNDER: FAULT/DISABLED

indicates a sounder circuit

fault or disablement

POWER SUPPLY FAULT

indicates an unsatisfactory

power supply to the panel.

1ThisLEDisalsoconfigurableasSOUNDERSSILENCED.

2This LED can be configured as: FAULT O/P: FAULT/

DISABLED.

Visible/Audible Indicators

•Liquid Crystal Display (LCD) - (Section 4.1.1).

•Internal Buzzer - (Section 4.1.2).

ID50 Series Panel - Operating Manual

Automatic Alarms - What to do

5 997-264-000-8, Issue 8

January2007

3 Automatic Alarms - What to do

Before any automatic alarms have been sounded the

panel only operates in display mode (quiescent state).

Theusermust then turn the keyswitchtothe right or enter

aLevel 2access code to enable the panel’spushbuttons.

Only one alarm condition can be displayed at a time

onthe LCD.If firealarms,faultsand/or warningconditions

(Plant Alarm) are present on the panel at the same time,

they are displayed in the following priority order:

a. Fire Alarms.

b. Pre-alarms

c. Faults.

d. Warnings.

The alarm condition is registered in a log.

The user must then enter a Level 2 access code, or turn

the keyswitch to the right, to enable the panel’s

pushbuttons. When the Level 2 access code is active,

the ‘

’ buttons can be used to scroll through the

alarms and the ‘

’ button will display the first alarm.

3.1 Fire

Automatic panel actions:

If the system detects a fire alarm, the panel always does

the following automatically:

a. Operates the internal (high-pitched) buzzer.

b. Illuminates the red FIRE LEDs, and the numbered

red ZONE FIRE LED.

c. Displays information on the LCD regarding the fire

condition. The information includes device address

and device location (see example below).

FIRE 02 / 05 Z01 M12 MCP 11:59

MAIN BUILDING BASEMENT ROOM 23

Note: If a delay is configured DELAYED is displayed on

the top line of the LCD. When a delay is active the

DELAYACTIVELED illuminatesandthe remaining

time before the first day mode delay expires is

displayedevery 5 secs.The LED onlyextinguishes

when the delay period has expired.

d. Operatesthe sounders and output modulesaccording

to the panel’s Control-by-Event (CBE) Rules

(configured during the Commissioning stage).

ALARM

CONDITION

ZONE

NUMBER

DEVICE

ADDRESS

ZONE TEXT

TIME OF LOGGED

ALARM CONDITION

DISPLAYED

ALARM

CONDITION

LOGGED

ALARM

CONDITIONS

DEVICE

TYPE

DEVICE

TEXT

ID50 Series Panel - Operating Manual

Automatic Alarms - What to do

6997-264-000-8, Issue 8

January2007

Recommended operator actions:

Note: Intherecommendedoperatoractionsdescribedbelow

onlyMUTEBUZZERand ENDDELAYareselectable

atAccess Level1.TheoperationofEXTEND DELAY,

EVACUATE,SILENCE,RESOUNDandRESETmust

onlybepossibleataccessLevel2,inaccordancewith

the requirements of EN54:Part 2.

1Operate the MUTE BUZZER pushbutton to silence

the panel’s internal buzzer.

2Follow prescribed instructions for evacuation of

premises,notification of FireBrigadeand investigation

of source of fire.

3If additional sounder operations are required to

achieve a complete and immediate evacuation of the

premises, press the END DELAY /EVACUATE

pushbutton (needs access level 2). This will cause

the internal buzzer to resound, so press the MUTE

BUZZER pushbutton to silence.

4When more than one fire Alarm condition is present,

itis possible to manually scroll through all logged Fire

Alarm conditions using the ‘

’ arrows.

Note: With multiple alarms, the LCD displays the first

alarm event.

5When evacuation of the premises is achieved, or at

the direction of an authorised person, the Alarm

Sounders may be silenced by pressing the

SILENCE / RESOUNDpushbutton.

Note: The SOUNDERS SILENCED LED illuminates if

this option was configured during panel

commissioning. The default function for this LED

is PRE-ALARM.

6To re-start the sounders, press the

SILENCE / RESOUND pushbutton. You must wait at

least 10 seconds after having originally silenced the

soundersbeforeresoundingthem. If the SOUNDERS

SILENCED LED option was configured during

commissioning to illuminate, this will now extinguish.

7When the cause of the alarm has been removed and

call points and input devices have been locally reset,

the system may be returned to ‘Status: NORMAL’*by

pressing the RESET pushbutton.

*Unless the Site name menu was edited during

commissioning-refer to Section 4.1.1 Liquid crystal

Display.

Status: NORMAL

Sat 01/12/2001 00:00:00

EN54-2: 7.6.1, 7.8, 8.7.1,

9.1.2

Ensure EN54 compliance

for access to controls.

Andere Handbücher für ID50 SERIES

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Notifier Feueralarm Handbücher

Notifier

Notifier 1010 Bedienungsanleitung

Notifier

Notifier FS-WST Bedienungsanleitung

Notifier

Notifier IFS-2600 Technisches Handbuch

Notifier

Notifier NBG-12LO Bedienungsanleitung

Notifier

Notifier NFS-3030/E Betriebsanleitung

Notifier

Notifier UniNet 2000 AFP-300 NION Bedienungsanleitung

Notifier

Notifier NFS-640 Bedienungsanleitung

Notifier

Notifier VGM NION UniNet 2000 Bedienungsanleitung

Notifier

Notifier UZC-256 Bedienungsanleitung

Notifier

Notifier AFC-600 Bedienungsanleitung

Notifier

Notifier NBG-12S Bedienungsanleitung

Notifier

Notifier NBG-12LOB Bedienungsanleitung

Notifier

Notifier AFP-200 Bedienungsanleitung

Notifier

Notifier ID50 SERIES Bedienungsanleitung

Notifier

Notifier NAM-232 Bedienungsanleitung

Notifier

Notifier NBG-12LX Bedienungsanleitung

Notifier

Notifier ONYX Series Bedienungsanleitung

Notifier

Notifier 002-439 Bedienungsanleitung

Notifier

Notifier NBG-12LX Bedienungsanleitung

Notifier

Notifier AM2020 Bedienungsanleitung

Notifier

Notifier AFP-300 Betriebsanleitung

Notifier

Notifier CAB-5 Technisches Handbuch

Notifier

Notifier ID50 SERIES Merkblatt

Notifier

Notifier UniNet 2000 Simplex 4010 NION Bedienungsanleitung

Beliebte Feueralarm Handbücher anderer Marken

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Bedienungsanleitung

System Sensor

System Sensor 22051TLE-RF-26 Bedienungsanleitung

Pittway

Pittway Notifier AM2020 Bedienungsanleitung

Ampac

Ampac ZoneSense Bedienungsanleitung

Kidde

Kidde VM-1 Produkthandbuch

LST

LST SIM016-3 Bedienungsanleitung

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Originalbetriebsanleitung

bolid

bolid S2000-IP-03 Bedienungsanleitung

GST

GST DI-9204 Bedienungsanleitung

E2S

E2S BExTBG05D Bedienungsanleitung

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Bedienungsanleitung

Siemens

Siemens FDOOT221 Bedienungsanleitung

hyfire

hyfire HY5000 Series Bedienungsanleitung

FlameStop

FlameStop PFSIFP8 Bedienungsanleitung

Radionics

Radionics Radionics 9124 Bedienungsanleitung

UniPOS

UniPOS FD 7120 Bedienungsanleitung

FIREWOLF

FIREWOLF FW-C01224 Bedienungsanleitung

Siemens

Siemens MH-5 Series Service-Handbuch