Nova 55264 Bedienungsanleitung

133-01-2303

Neptune Max Stand

Accessory

OPERATION MANUAL

SKU 55264

For safety reasons, please read

carefully read amd understand

these instructions.

The NOVA Neptune Max Stand is

designed to fit and be used with

the Neptune, Neptune Max, DVR

XP and 1624-44 woodlathes.

Use of the Neptune Max Stand on

other lathes could cause a

malfunction and risk of serious

injury, if you are unsure of the use

or the application of this

accessory, contact the technical

support department of Teknatool

International or your reseller.

Further information can also be

found in your lathe manual.

Parts List:

Part SKU

Description

Qty

1 FW12 Flat Washer M12 ZP 8

2 SW12 Spring Washer M12 ZP 8

3 C12035 M12x35mm Cap Screw ZP 8

4 C06016 M6x16mm Cap Screw ZP 4

5 FW06 Flat Washer M6 ZP 16

6 SW06 Spring Washer M6 ZP 16

7 BHC06012 M6x12mm Button Head Cap Screw 8

8 5519016 Stand Cross Plate 2

9 5519015 Stand Legs 4

10 5519018 Stand Cover 2

11 5519017 Tool Tray 2

12 24161 Foot Assembly 4

Specifications:

Metric Imperial

Overall Size 1292mm (L) x 490mm

(w) x 818mm(H)

50.9” (L) x 19.3” (w) x

32.2” (H)

Net Weight 25.5 Kg ± 0.5 Kg 56.2 Lb ± 1.1 lb

For all worldwide Inquiries, Repairs or Services

(issues must be in writing)

https://www.teknatool.com/support/

133-01-2303

Assembly Instructions:

Step 1:

Lay the bed face down on a flat clean surface. It is recommended that

a piece of cardboard is placed between the bed and the floor to

protect the surface of the bed.

Step 2:

Align one of the legs (Part 9) with the mounting holes on the bed.

Fasten in place using Parts 1, 2 & 3 respectively.

DON’T FULLY TIGHTEN AT THIS STAGE.

Repeat this process for the remaining three legs.

Step 3:

Align the cross plate (Part 8) with the holes on the inside of the legs.

Fasten in place using Parts 5, 6 & 4 respectively.

DON’T OVER TIGHTEN AT THIS STAGE.

Step 4:

Align the tool tray (Part 11) with the holes on the outside of the legs.

Fasten in place using Parts 5, 6 & 7 respectively.

DON’T OVER TIGHTEN AT THIS STAGE.

Step 5:

Fully tighten the M12 cap screws (Part 3) assembled in Step 2,

followed by the M6 cap screws (Part 4) and the M6 button head cap

screws (Part 7) assembled in Step 3 and Step 4 respectively.

Step 6:

Attach the feet (Part 12) to the base of the legs.

Step 7:

Flip the stand over onto its feet so that it is right side up.

WARNING: Due to the weight of the stand, it is recommended that a

second person helps lift the stand.

Step 8:

Align the cover plate (Part 10) with the holes on the side of the stand.

Fasten in place using Parts 5, 6 & 7 respectively.

Step 9:

To balance the stand, adjust the feet accordingly by

screwing/unscrewing the feet from the base of the stand. Secure in

place by fastening the nut tightly against the base of the leg.

133-01-2303

Teknatool Warranty

NOVA Limited Warranty

4499 126th St North | Clearwater Florida 33762

teknatool.com | 727.954.3433

Our policy is one of continuous improvement. We therefore reserve the right to change specification/design without notice. This warranty

is Teknatool International Ltd and Teknatool USA Inc. sole warranty whether written or verbal, whether expressed or implied by law, trade,

custom, or otherwise, whether of merchantability, fitness for purpose, or otherwise, except for remedies available to customers under

the Consumer Guarantees Act or other legislation. For full warranty details and instructions on how to file a claim, please go to

teknatool.com

Andere Nova Rack & Stand Handbücher

Nova

Nova CH-1102 Administratorhandbuch

Nova

Nova VWK1 Bedienungsanleitung

Nova

Nova CH-2000 Merkblatt

Nova

Nova SMA-1-0203-NK series Bedienungsanleitung

Nova

Nova 50090190 Bedienungsanleitung

Nova

Nova FPA-0-2124-27 Bedienungsanleitung

Nova

Nova Trolley E-Class Handbuch

Nova

Nova FPA-0-1821 series Bedienungsanleitung

Nova

Nova Trolley Handbuch

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung