Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Betriebsanleitung

Novell®

www.novell.com

novdocx (en) 16 April 2010

AUTHORIZED DOCUMENTATION

ZENworks 10 Configuration Management Command Line Utilities Reference

ZENworks

10 Configuration Management SP3

10.3

March 30, 2010

Command Line Utilities Reference

novdocx (en) 16 April 2010

Legal Notices

Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and

specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.

Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time,

without obligation to notify any person or entity of such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims

any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc.

reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to

notify any person or entity of such changes.

Any products or technical information provided under this Agreement may be subject to U.S. export controls and the

trade laws of other countries. You agree to comply with all export control regulations and to obtain any required

licenses or classification to export, re-export or import deliverables. You agree not to export or re-export to entities on

the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws.

You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. See the

Novell International Trade Services Web page (http://www.novell.com/info/exports/) for more information on

exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export

approvals.

stored on a retrieval system, or transmitted without the express written consent of the publisher.

Novell, Inc.

404 Wyman Street, Suite 500

Waltham, MA 02451

U.S.A.

www.novell.com

Online Documentation: To access the latest online documentation for this and other Novell products, see

the Novell Documentation Web page (http://www.novell.com/documentation).

novdocx (en) 16 April 2010

Novell Trademarks

For Novell trademarks, see the Novell Trademark and Service Mark list (http://www.novell.com/company/legal/

trademarks/tmlist.html).

Third-Party Materials

All third-party trademarks are the property of their respective owners.

4ZENworks 10 Configuration Management Command Line Utilities Reference

novdocx (en) 16 April 2010

Contents 5

Contents

novdocx (en) 16 April 2010

About This Guide 7

1 ZENworks Command Line Utilities 9

2 Command Line Utilities for Linux Satellites 89

3 ZENworks Diagnostic Center 99

3.1 Downloading and Extracting ZDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

3.2 Running ZDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

4 Troubleshooting ZENworks Command Line Utilities 103

5 Guidelines for Working with Zman 105

A Documentation Updates 107

A.1 March 30, 2010: SP3 (10.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

6ZENworks 10 Configuration Management Command Line Utilities Reference

novdocx (en) 16 April 2010

About This Guide 7

novdocx (en) 16 April 2010

About This Guide

This Novell ZENworks 10 Configuration Management Command Line Utilities Reference includes

information to help you use the following Novell®ZENworks®10 Configuration Management

utilities:

zman(1)

zeninfocollect(1)

zac(1)

The information in this guide is organized as follows:

Chapter 1, “ZENworks Command Line Utilities,” on page 9

Chapter 2, “Command Line Utilities for Linux Satellites,” on page 89

Chapter 3, “ZENworks Diagnostic Center,” on page 99

Chapter 4, “Troubleshooting ZENworks Command Line Utilities,” on page 103

Chapter 5, “Guidelines for Working with Zman,” on page 105

Appendix A, “Documentation Updates,” on page 107

Audience

This guide is intended for ZENworks administrators.

Feedback

We want to hear your comments and suggestions about this manual and the other documentation

included with this product. Please use the User Comments feature at the bottom of each page of the

online documentation, or go to the Novell Documentation Feedback site (http://www.novell.com/

documentation/feedback.html) and enter your comments there.

Additional Documentation

ZENworks 10 Configuration Management is supported by other documentation (in both PDF and

HTML formats) that you can use to learn about and implement the product. For additional

documentation, see the ZENworks 10 Configuration Management documentation (http://

www.novell.com/documentation/zcm10/).

Documentation Conventions

In Novell documentation, a greater-than symbol (>) is used to separate actions within a step and

items in a cross-reference path.

A trademark symbol (®, TM, etc.) denotes a Novell trademark. An asterisk (*) denotes a third-party

trademark.

When a single pathname can be written with a backslash for some platforms or a forward slash for

other platforms, the pathname is presented with a backslash. Users of platforms that require a

forward slash, such as Linux*, should use forward slashes as required by your software.

8ZENworks 10 Configuration Management Command Line Utilities Reference

novdocx (en) 16 April 2010

ZENworks Command Line Utilities

novdocx (en) 16 April 2010

ZENworks Command Line Utilities

The following sections give information on the Novell®ZENworks®10 Configuration Management

command line utilities:

“zman(1)” on page 10

“zeninfocollect(1)” on page 78

“zac(1)” on page 80

10 ZENworks 10 Configuration Management Command Line Utilities Reference

novdocx (en) 16 April 2010

zman(1)

Name

zman - The command line interface to Novell ZENworks 10 Configuration Management, which

provides comprehensive server, workstation, and user management, and to Novell 10 Asset

Management, which provides software and hardware inventory of servers and workstations,

software usage tracking, and software license compliance.

Description

The zman command line interface provides you a full-featured utility that can simplify many

operations by using scripting and can provide quick access to operations. It can be used effectively

in automation of tasks.

The following sections provide information about all of the commands provided for ZENworks 10

Configuration Management and ZENworks 10 Asset Management. Some of the commands apply to

both products, and some apply to only one or the other.

The following commands apply only to ZENworks 10 Configuration Management. If Configuration

Management is not installed or active, the commands have no effect:

Bundle commands

Imaging commands

Policy commands

The following commands apply only to ZENworks 10 Asset Management. If Asset Management is

not installed or active, the commands have no effect:

Asset Management commands

Syntax

zman <command> [-options] [arguments]

In general, zman commands have both a short form and a long form. The long form is assembled in

the form category-action. For example, the command

registration-list

lists all registrations in

a registration folder. There are many commands, but most of them are easy to remember because

they are grouped under categories (workstation, server, bundle, policy, administrator, registration,

etc) and most actions (list, create, modify, delete) to perform on them are common.

The abbreviated form of each command uses one letter from each word in the long form. In this

manner,

admin-list

is shortened to

. There are some exceptions to this rule to maintain the

uniqueness of the short names. For example,

is the short form of

bundle-create

, and

bcp

is the

short form of

bundle-copy

A command takes options and arguments. Options can be specified anywhere in the command.

Arguments are dependent on position.

Andere Handbücher für ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3...

Dieses Handbuch passt für folgende Modelle

Andere Novell Software Handbücher

Novell

Novell LINUX ENTERPRISE SERVER STARTER SYSTEM Bedienungsanleitung

Novell

Novell IFOLDER 3.7 - SECURITY ADMINISTRATION Bedienungsanleitung

Novell

Novell SLRS 8 - Handbuch

Novell

Novell ACCESS MANAGER 3.1 SP2 - SSL VPN USER GUIDE... Bedienungsanleitung

Novell

Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Bedienungsanleitung

Novell

Novell IDENTITY MANAGER 3.6.1 - NULL SERVICE AND LOOPBACK SERVICE... Bedienungsanleitung

Novell

Novell GROUPWISE 8 - RESOURCES Bedienungsanleitung

Novell

Novell CLIENT FOR LINUX 1.2 Bedienungsanleitung

Novell

Novell EDIRECTORY 8.8 SP5 Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION... Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 10 SP3 -... Handbuch

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 -... Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE DESKTOP 11 Bedienungsanleitung

Novell

Novell GROUPWISE 8 - WEBACCESS Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE... Bedienungsanleitung

Novell

Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0.2 - INTEGRATION AND STREAMING GUIDE... Bedienungsanleitung

Novell

Novell SENTINEL RAPID DEPLOYMENT 6.1 - INSTALLATION GUIDE... Bedienungsanleitung

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 Bedienungsanleitung

Novell

Novell GROUPWISE 8 - MONITOR Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE DESKTOP 11 - ADMINISTRATION GUIDE... Kurzanleitung

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 -... Bedienungsanleitung

Novell

Novell IFOLDER 3.7 - SECURITY ADMINISTRATION Bedienungsanleitung

Novell

Novell EDIRECTORY 8.8 SP2 - GUIDE 10-2007 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch