NSA MTFDC-84RC Bedienungsanleitung
Dual Position
Midi Tower Fan
MTFDC-84RC
User manual
www.nsauk.com
with DC motor
Welcome
With a clear focus on new technologies, innovation and design, NSAUK has
played a leading role in the Air Improvement industry for over 20 years.
NSAUK uses the latest technologies to maximise consumer benets with
energy saving DC motors and cordless rechargeability at the forefront.
Boasting 8 Quiet Mark accreditations, NSAUK are the leading brand for
build quality & exceptionally quiet performance.
www.nsauk.com
3
Contents
4
5
6
7
13
15
16
17
18
19
20
Box Contents
Parts Description
Controls
Operation Guide
Remote Operation
Cleaning & Care
Annual Maintenance
Recycling & Disposal
Tips & Troubleshooting
Safety
Technical Data
Thank you for purchasing this Dual Position Midi Tower Fan with energy saving DC
motor, LED Display, 8 speeds, 8hr Timer and Remote Control.
Please read this instruction manual before using your Midi Tower Fan for the rst time.
Keep safe for future reference.
4
What’s included
Unpack all items from the box, plug in the adaptor to the mains supply, connect
to the power cord connector at the back of the fan, turn on the mains and you
are all set.
ON/OFFON/OFF OSOSCC
SPEED/TIMESPEED/TIMERR
TIMERTIMER //
PRE SETPRE SET
MODMODEE
MUTEMUTE
1
2
3 5
1. Dual Position Midi Tower Fan
2. Remote Control
3. CR2032 cell battery (for remote control)
4. User guide
5. Power adapter & cord
Included in the box you will nd:
4
Fig.1
5
Parts Description
1.
2.
3.
4.
5.
1. LED Display Screen & RC Receiver
2. Front Grille (Air outow)
3. Oscillation Base (in Vertical position)
4. Oscillation Base (in Horizontal position)
& Carry Handle
5. Fan casing - front panel
Front view
8.
7.
6.
Side view
6. Securing Screw
(access to washable drum
- see maintenance page 15)
7. Back Grill (Air intake)
8. Power Cord Connector
Fig.2
Fig.3
6
Remote control
ON/OFF OSC
SPEED/TIMER
TIMER /
PRE SET
MODE
MUTE
1. On / Off
2. Speed (increase only) / Hours (increase only)
3. Timer / Pre-Set Timer
4. Oscillation
5. Sleep mode icon
6. Breeze mode icon
7. LED Display for Timer & Speed settings
8. On / Off
9. Oscillation
10.Decrease – Speed / Timer
11.Increase – Speed / Timer
12.Timer / Pre-Set timer
13.Mode Selection – Breeze / Sleep
14.Silent Option – Mute Beep
1.
2. 3.
4.
Manual controls
Display
5. 6. 7.
8. 9.
10. 11.
12. 13.
14.
Fig.4
Fig.5
Fig.6
Controls
7
Operation guide
Press ON/OFF once to turn on the unit and press again to turn off.
If the fan is on and the display is off – pressing the ON/OFF button once will only turn
ON the display – press the ON/OFF button a second time to turn off the fan.
Using the manual controls or the remote control, press OSC once to
activate the oscillation feature, for wide distribution of air. Press OSC
button again to stop oscillation function.
This Dual Position Midi Tower fan will oscillate horizontally in the
upright position on a desk or the oor and it can be laid down on the
parallel bars for a vertical swing of air.
Oscillation (OSC)
On/Off
Fig.7
8
When rst connected to the mains supply, the fan will start at Speed 1. Subsequent
uses, the fan will remember the previous setting until disconnected from the mains
supply.
Press the Speed/Hours button on the manual controls (Refer Fig.4 - Button #2) to
increase the speed to the desired level.
Speed
Using the remote control press the “+” to increase the fan speed from 1 to 8 or “–“ to
decrease the fan speed until the preferred speed is achieved.
The LED light indicates the speed selected. This light will go out after c. 30 seconds.
9
With the fan ON – you can set the run time between 1 and 8 hours duration. On
the manual controls [refer Fig.4], press the Timer button “3” once and then press the
Speed/Hours button “2” to increase the hours to the desired setting.
Using the remote control, press the Timer button once and then use the “+” to
increase the timer duration from 1 to 8hrs or use “–“ to decrease, until the preferred
duration is achieved.
Timer
The LED displays a ashing clock and an “h” beside the number during the selection
process – when the desired time is selected either press the Timer button “3” again or
stop pressing any buttons. The ashing will stop to conrm after 2-3 secs – displaying
time selected. The display will then revert to show the speed set plus a static clock
symbol indicating the Timer is set.
The display will automatically turn off after 30 secs.
If the LED display is off – you will need to press any button on the remote control or
the manual controls to turn on the display, then press Timer on the remote control
using “+” or “–” in the normal way, to change the time selected.
TIP: Our suggestion is to always set the Timer, even for 1 or 2 hours – so you don’t
need to remember to turn off the fan if you leave the room or your house – it will turn
off by itself after the set time is reached!!
10
With the fan OFF – press TIMER/PRESET button on the Remote Control or manual
controls to set the delayed start between 1 and 8 hours in the same way you set the
normal timer off function – see page 9.
The only difference is the display shows the static clock, the number of hours until the
delayed start and “h” symbol – this does not turn off until 30secs after the fan turns
itself ON. The fan is then ON until manually turned OFF.
On Remote Control ONLY, press Mode button once to select Natural Breeze Mode
(Speed/Airow Variation - refer Fig.8 on Pg11), press the Mode button a second time
to select Sleep mode (Speed/Airow Reducion - refer Fig.9 on Pg 12) and press the
Mode button a third time to turn off the mode function.
In both Mode settings there are three speeds – 1/Low 2/Medium 3/High
Use the “+” or “–“ buttons to increase or decrease the speed setting. Also use in
conjunction with the Timer &/or Oscillation function for more varied cooling.
Pre set timer
Modes
If you press the ON/OFF key while the Pre-Set timer is selected – the fan will cancel
the delayed start timer and begin operating normally at the previous speed set.
The display will turn off after 30secs.
Inhaltsverzeichnis
Andere NSA Lüfter Handbücher
NSA
NSA Antique DF-1214-BRZ Bedienungsanleitung
NSA
NSA TFDC-46RC Bedienungsanleitung
NSA
NSA SFDC-4057RC Bedienungsanleitung
NSA
NSA SFDC-4091RC Bedienungsanleitung
NSA
NSA MTF-18 Bedienungsanleitung
NSA
NSA FC-300BP Bedienungsanleitung
NSA
NSA SFDC-30128RC Bedienungsanleitung
NSA
NSA SF-1616-MPC Bedienungsanleitung
NSA
NSA FFRDC-24RC Bedienungsanleitung
NSA
NSA TF-31RC Bedienungsanleitung
NSA
NSA DF-5110 Bedienungsanleitung
NSA
NSA SFDC-30213RC Bedienungsanleitung
NSA
NSA DF15-R31-AC Bedienungsanleitung
NSA
NSA TFDC-60RC Bedienungsanleitung
NSA
NSA SFC-200B Bedienungsanleitung
NSA
NSA SFC-200B Bedienungsanleitung
NSA
NSA DF-1214-MPC Bedienungsanleitung
NSA
NSA MTF-30 Bedienungsanleitung
NSA
NSA TF-67RC Bedienungsanleitung
NSA
NSA TF-47RC Bedienungsanleitung
