QUICK INSTALLATION GUIDE
650TVL Mini Armor Dome Camera
Special features
Dear Customers!
The lighting flash with an arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
CAUTION
RISK OF ELECTRIC
SHOCK
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
INFORMATION
CAUTION – To prevent electric shock and risk of the fire hazards
This installation should be made by a qualified service person and should conform to
all local codes.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much
for your confidence and kindly ask you to read the following instructions carefully
before installation and operation in order to take full advantage of all quality
features regarding this product.
●
3.7mm lens (90 degree AOV/Diagonal)
●
1/3” Sony 960H Ex-view HAD CCDⅡ
- Smart IR Image Compensation
●
650TVL (Day) / 700TVL (Night)
●
Night Vision (Infra-Red) Version
- 10M IR Beam Distance
●
New Color Signal Processing
●
DNR (Digital Noise Reduction)
- CDS Day & Night
●
IP66 Weatherproof
●
DC12V Power Input
●
3-Axis (All directional mount)
5-1. Installation overview
4. Package
5. Installation
Camera x 1
Tapping screws x 4
(Ø3*12L)
L-Wrench x 1
(Ø2)
Drilling template x 1Instruction manual x 1
Ceiling Tile
Drilling Template
Dome base
Rear Sticker
Camera Set
Dome Front Set Screw
L-Wrench
O28
1. Precautions
• Please read the manual carefully before the installation in order to make use
the camera to be set up correctly and to have the best picture quality.
• Please keep the manual in good condition for your future reference and service
application.
• Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
• If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer
before reusing.
• Avoid installing the camera at extremely hot or cold places.
• Avoid installing the camera at a place of high humidity.
• Avoid installing the camera at the place exposed to gas or oil.
• If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers.
There are no parts inside that need maintenance by the user.
All maintenance should be carried out by qualified personnel.
• Keep the top glass of the lens always clean in order to obtain the best picture
quality all the time. Be careful not to be stained by fingerprint.
• Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
• Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
• Never try to touch the camera in wet hand. It may cause an electric shock.
• Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
2. Limitation of liability
3. Disclaimer of warranty
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability,fitness
for any particular purpose, or noninfringement of the third party's right.
This publication could include technical inaccuracies or typographical errors.
Changes are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason,
becomes public or is used for the purpose other than surveillance.
QUICK INSTALLATIONGUIDE
Night Vision Mini Armor Dome Camera
Specialfeatures
DearCustomers!
Byselecting this product, you have decided to use a professional device that
guaranteeshighest quality and reliability. We would like to thank you very much
foryour confidence and kindly ask you to read the following instructions carefully
beforeinstallation and operation in order to take full advantage of all quality
featuresregarding this product.
●
3.7mmlens
●
1/3”Sony 960H Ex-view HAD CCDⅡ
●
SmartIR Image Compensation
●
650TVL(Day)/ 700TVL(Night)
●
10MIR Beam Distance
●
NewColor Signal Processing for
●
DNR(DigitalNoise Reduction)
HighColor Reproduction
(90degree AOV/Diagonal)
●
CDSDay & Night
●
IP67Weatherproof
●
DC12VPower Input
●
3-Axis
(All directional mount)
Tapping Screw
- Night Vision (Infra-Red) Version
- Non-IR Version
10M IR Beam Distance
1-512-756-1678
CD1WP
