Nuliie S32 Bedienungsanleitung

WEARABLE

BREAST

PUMP

User Manual

Visit www.nuliie.com for

our 24/7 live chat or email

[email protected] for

assistance and inquiries.

S32

English -------------------------------------

Deutsche -------------------------------------

Español -------------------------------------

Français -------------------------------------

Italiano -------------------------------------

04 -13

14 -23

24 -33

34 -43

44 -54

Contents

Product Structure Diagram

1 2 3 4 5 6 7

Parts List

Flange

Pump Motor

Silicone Diaphragm

USB Charging Cable

Milk Collector

Bra Adjustment Buckle

Valve

Description of LED Display and Button Function

Pause/Start Button

Expression Mode

Stimulation Mode

Level Up Button

Level Display

Power Button/Mode

Selection Button

Massage Mode

Automatic Mode

Time/Minute

Level Down Button

Power Display

Time Display

Notice

This product has a built-in lithium battery. When the power

indicator ashes, it is recommended that you use a certied 5V 1A

power adapter to charge the host as soon as possible.

English

LED Power Display

The breast pump display features three power frames for easy monitoring.

Please note that the pump cannot be used while charging. During charging,

the display interface will only show the power level.

Power level shows 1 bar

and ashing: the battery

is running low; charge it as

soon as possible.

Power level shows three bars

and is no longer ashing:the

battery is fully charged.

English

Please disassemble each accessory individually for cleaning and sanitizing before using.

Be cautious when cleaning the valve and silicone diaphragm. To clean the valve and silicone diaphragm, gently rub it between

the thumb and forenger in warm, soapy water. Avoid inserting anything into the valve that could damage it.

Warning

First Time Use After Each Use

Pump Motor Turn on the pump by pressing the power

button.

Wipe with a clean damp cloth with 70% ethyl alcohol or

isopropyl alcohol as needed. Do not immerse the pump

in water.

Flange, Silicone

Diaphragm, Valve, Linker and

Milk Collector

Boil in water for 5 minutes. Do not

microwave the Flange, Silicone Diaphragm,

Valve, Linker and Milk Collector.

Clean with mild dish washing soap or clean water.

The accessories can be sterilized by boiling or soaking

them for 5-8 minutes in boiling water. The sterilization

temperature of accessories should not exceed 100 C.

Cleaning

Cleaning & Maintenance

Assembly

To assemble the pump, follow the steps below.

CAUTIONS

Make sure that you clean the pump as instructed in this user manual.

Make sure that you assemble the pump correctly as instructed in this user manual.

To avoid leakage, remove the residue around the rim before assembling.

Wash your hands thoroughly before you assemble cleaned components.

Place the silicone diaphragm inside the milk container

and apply pressure. Get a perfect seal by using your

hands to make the borders fasten tightly.

Install the valve to the bottom of the breast milk collector,

and install it in the correct direction. 2

To install the ange on the milk collector, make sure

to align the diversion groove on the ange with the

backow groove on the milk collector, and then press

the edges with both hands to ensure the seal is in place.

Install the main body of the breast pump on the milk

collector, align the notch under the main body with the

silicone diaphragm, and assemble it downward to t the

milk collector to ensure a complete seal.

English

To Start the Pumping Process

To create suction with the breast pump, place the ange

against your breast without any gaps, center your

nipples, and keep them upright. Make sure not to move

the device or your breasts while doing this.

1Long press the power button to start the breast pump.

Use a breast pump to assist the mother in getting through the discomfort. To properly stimulate the growth of the

mammary glands before using the breast pump, warm the breasts for ve minutes with a heated towel or a hot and cold

compress.

Starting slowly in rst gear can help mimic a baby's sucking motion and encourage to release milk from the pituitary gland.

To ensure complete opening of the mammary glands, adjust the suction level from small to large.

Eight minutes is advised for each suction; do not go over 20 minutes.

If you are unable to pump milk, avoid pumping for more than ve minutes. Instead, try again later.

If you experience any discomfort or pain while using the breast pump, please stop using it and consult a nursing

professional.

When the milk container holds more than 120ml of milk, the ow of breast milk slows down. Transfer the milk to a storage

bottle to restore the suction speed.

The valve and silicone diaphragm are consumable products with a usable life of 1-2 months and 4-6 months.

Prior to Pumping

English

You can short press the" " button to control the breast

pump start and pause functions. After starting the

breast pump, press the " " button to switch modes.

You can choose from four modes (stimulation mode,

expression mode, massage mode, and automatic mode).

When the " " is lit, it means the stimulation mode; when

the " " is lit, it means the expression mode; when the

"" is lit, it means the massage mode; when the " " is

lit, it means the automatic mode.

3Long press the power button " " to turn o the breast

pump.

Warm Tips

1. This model has a built-in memory function. When you turn on the

device again, it automatically enters and shifts to the working mode

and suction level you used last time.

2. The breast pump will automatically stop after 30 minutes of work.

In each mode, there are 9 levels of suction. You can

adjust the suction to your comfort level by using the "+"

button to increase and the "—" button to decrease.

English

Step 1

Step 2

Step 3

Breastfeeding Sitting

Position

For maximum comfort and eciency,

lean slightly forward and use a

comfortable chair. Use a cushion for

back support. Ensure to keep the

breast cup and pump upright to ensure

proper suction.

How to Adjust Bra Straps

To ensure a comfortable experience, adjust your bra straps

by hanging one end of the adjustment buckle on the bra

cup and the other end of the breastfeeding buckle on the

nursing bra's inner lining. Modify the length of the bra straps

to your comfort level.

Pumping Process Completion

To turn o the breast

pump, long-press the

power button. Afterward,

break the seal between

the breast and the pump

funnel with your nger and

carefully remove the pump

from your breast.

Once you have nished pumping, remove the breast pump

from your breast while keeping it upright. Next, remove the

motor part and hold the milk collector to pour the breast

milk into the bottle. Be sure to align the breast cup's milk

collector gap with the mouth of the bottle to prevent any

spills.

Separate the milk collector from the pump motor ready

for feeding/storage. Clean the other used parts based

on the instructions.

Pour the milk into the storage bottle. Ensure the slot

feature is aligned with the bottle.

English

Proper Storage of Breast Milk

Always use sterilized breast pumps to collect breast milk.

Use sterilized, clean milk storage bags or bottles with a sealing cushion.

Place the milk in the fridge or freezer right after pumping.

Breast Milk Cold Storage

Do not freeze breast milk repeatedly.

Do not mix fresh breast milk with frozen breast milk.

Dispose of any remaining breast milk after a feeding.

You can refrigerate the extracted milk for up to 48 hours or freeze it for up to three months. Be sure to label the milk bottle or

storage bag with the date and time it was collected.

How to Safely Unfreeze Breast Milk

To thaw the breast milk, place it in the refrigerator section overnight. For emergency, you can defrost the breast milk quickly

by placing the storage bag or bottle in a dish of hot water.

Once the breast milk has been defrosted, it must be consumed within 24 hours. Do not refreeze breast milk that has already

been thawed.

Safely Heating Breast Milk

1To heat the breast milk, you can either place the baby bottle in a bowl of hot water or use a baby bottle and food heater for

safe and quick heating.

Always check the temperature of the breast milk before feeding it to your baby to avoid any burns or discomfort.

Do not use a microwave oven to heat breast milk as it can destroy essential nutrients and antibodies. Additionally, uneven

heating may cause partial overheating of the liquid, which can burn baby's mouth.

Avoid immersing the milk storage bottle in boiling water to heat it, as this can cause the bottle to rupture or crack.

English

Andere Handbücher für S32

Inhaltsverzeichnis

Sprachen:

Andere nuliie Brustpumpe Handbücher

nuliie

nuliie S32 Bedienungsanleitung

Beliebte Brustpumpe Handbücher anderer Marken

besrey

besrey XN/MS-2246A Bedienungsanleitung

Medela

Medela Symphony Bedienungsanleitung

Philips

Philips AVENT SCD241/01 Bedienungsanleitung

Philips

Philips AVENT SCF301 Bedienungsanleitung

nuVita

nuVita MATERNO DUAL 1290 Bedienungsanleitung

Philips AVENT

Philips AVENT Breast Pump Bedienungsanleitung

Medela

Medela Swing Bedienungsanleitung

Chicco

Chicco NaturallyMe Bedienungsanleitung

MOMCOZY

MOMCOZY S12 Bedienungsanleitung

Philips AVENT

Philips AVENT Breast Pump Bedienungsanleitung

Philips

Philips SCF292 Bedienungsanleitung

Philips

Philips AVENT SCF397 Bedienungsanleitung

Philips

Philips AVENT SCF396/11 Bedienungsanleitung

weewell

weewell WPB900 Bedienungsanleitung

CANGAROO

CANGAROO GENTLE TOUCH Bedienungsanleitung

Medela

Medela Swing Bedienungsanleitung

Spectra

Spectra S2 Bedienungsanleitung

Medela

Medela Solo Hands-free Bedienungsanleitung