Numark NS7 Bedienungsanleitung

SPECIFICATION

FUNCTION

1. GAIN TRIM – Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the software.

2. CHANNEL TREBLE – Adjusts the high (treble) frequencies.

3. CHANNEL MID – Adjusts the mid-range frequencies.

4. CHANNEL BASS – Adjusts the low (bass) frequencies.

5. CHANNEL FADER – Adjusts the audio level on the corresponding channel in the software.

6. CROSSFADER – Blends audio between the channels assigned to the left and right side of the crossfader.

7. MASTER VOLUME – Adjusts the output volume of the Program Mix.

8. BOOTH VOLUME – Adjusts the output volume of the BOOTH OUTPUT mix.

9. HEADPHONE MIX – Blends the pre-fader audio playing on Channels 1 and 2. Sliding this to the left plays Channel 1. Sliding to the right plays

Channel 2.

10. HEADPHONE MODE – Selects the audio that is sent to the headphones. Switch it to “MASTER” to hear the Program Mix. Switch it to “CH1

CH2” to hear a mix of Channels 1 and 2 in the headphones.

11. MASTER OUTPUT (BALANCED) – Connect this low-impedance XLR output to a PA system or powered monitors The level of this output is

controlled with the MASTER knob on the top panel.

12. MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system The level of this output is

controlled by the MASTER knob on the top panel.

13. BOOTH OUTPUT (RCA) – Use standard RCA cables to connect this output to a booth monitoring system The level of this output is controlled

by the BOOTH knob on the top panel.

14. SYNC – Automatically matches the corresponding Deck’s tempo with the other Deck’s tempo.

15. RELOOP – Press this to jump to the start of the loop and enable it. If the Deck is already looping when you press it,

Pointer will jump to the start

of the loop and continue. If no loop is set, nothing will happen.

16. 1/2 X – Press this to halve the length of the selected loop.

17. 2 X – Press this to double the length of the selected loop.

18. STRIP SEARCH – The length of this strip represents the length of the entire track. Place your finger on a point along this sensor to jump to that

point in the track. (If you want to scroll through a track, we recommend using your computer rather than running 'your finger along the strip.)

19. TAP – Tap this button at the same tempo as the track to help the software detect a more accurate BPM reading.

20. CRATES – Press this to move the selector to the Crates Panel in the software

SERVICE MANUAL

MODEL:NS7

STANDARD

1. MaxMSP test program for production Line

2. AP fest specification

RCA Balance Output

Voltage AC 100V~240V 50~60Hz

MASTER:3.5



0.5V

Volume BOOTH:3.5



0.5V

BALANCED:12



Distortion defection 0.02% below

S/ N 96dBr upward

Separation 94dBr upward

F/R 20~20KHz



0.5dB

1. When test is in progress , gain on Input and headphone is set at Max. volume.

Headphone : UN Balanced:

2. 300mV 1KHz Sin wave form is input to left plug of Aux Input

Volume 7V



S/N 85dBr upward

Distortion defection 0.05% below

F/R 20~20KHz



1dB

DISASSEMBLY PROCEDURES



(A) REMOVAL 42 PCS OF SCREWS BEFORE REMOVE THE BOTTOM CHASSIS.





(A) REMOVE THE 1 PC NUT.

(B) REMOVE THE 4 PCS OF SCREWS.

(D) REMOVE THE 3 PCS OF SCREWS.

(E) REMOVE THE 1 PC CONNECTORS BEFORE REMOVAL OF XFADER PCB.

(F) REMOVE THE 1 PC NUT.

(G) REMOVE THE 5 PCS OF SCREWS.

(H) REMOVE THE 1 PC CONNECTORS BEFORE REMOVAL OF INPUT PCB.



  

  

(A) REMOVE THE 4 PCS OF SCREW.

(B) REMOVE THE 4 PCS CONNECTOR.

(D) REMOVE THE 8 PCS OF SCREWS.

(E) REMOVE THE 6 PCS CONNECTOR BEFORE REMOVAL OF MOTOR PCB(L&R).

(F) REMOVE THE 4 PCS OF SCREW.

(G) REMOVE THE 2 PCS CONNECTOR BEFORE REMOVAL OF SWITCH POWER.

(H) REMOVE THE 3 PCS OF SCREW.

(I) REMOVE THE 3 PCS CONNECTOR BEFORE REMOVAL OF POWER PCB.



  

(A) REMOVE THE 3 PCS OF VR KNOB.

(B) REMOVE THE 19 PCS OF SCREW.

(D) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(L).

(E) REMOVE THE 12 PCS OF KNOB AMD 7 PCS NUT.

(F) REMOVE THE 5 PCS OF SCREW.

(G) REMOVE THE 4 PCS OF BRASS STANDOFF

(H) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF MIXER PCB.

( I ) REMOVE THE 3 PCS OF VR KNOB.

(J ) REMOVE THE 4 PCS OF BRASS STANDOFF.

(K) REMOVE THE 3 PCS OF BRASS STANDOFF.

(L) REMOVE THE 19 PCS OF SCREW.

(M) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(R).

 



! !

(A) REMOVE THE 4 PCS OF VR KNOB

(B) REMOVE THE 8 PCS SCREW BEFORE REMOVAL OF FRONT PANEL.

(D) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF CROSS FADER PCB.

(E) REMOVE THE 4 PCS OF SCREW.

(F) REMOVE THE 2 PCS CONNECTOR BEFORE REMOVAL OF FADER PCB.(L&R)

(G) REMOVE THE 4 PCS OF SCREW.

(H) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF METER PCB.

!

Andere Handbücher für NS7

Inhaltsverzeichnis

Andere Numark DJ-Equipment Handbücher

Numark

Numark NDX500 Bedienungsanleitung

Numark

Numark Mixtrack Bedienungsanleitung

Numark

Numark MIXDECK EXPRESS BLACK Bedienungsanleitung

Numark

Numark Mixtrack pro II Bedienungsanleitung

Numark

Numark C2 Bedienungsanleitung

Numark

Numark NS6 Bedienungsanleitung

Numark

Numark CDN-88 Bedienungsanleitung

Numark

Numark NS7FX Bedienungsanleitung

Numark

Numark MIXTRACK PLATINUM FX Bedienungsanleitung

Numark

Numark MIXTRACK PLATINUM FX Bedienungsanleitung

Numark

Numark DDS80 Bedienungsanleitung

Numark

Numark HDMIX Bedienungsanleitung

Numark

Numark NS6 Bedienungsanleitung

Numark

Numark PHAT TRAK Bedienungsanleitung

Numark

Numark MIXSTREAM PRO Bedienungsanleitung

Numark

Numark OMNI CONTROL Gebrauchsanweisung

Numark

Numark NS7II Bedienungsanleitung

Numark

Numark MIXSTREAM PRO Bedienungsanleitung

Numark

Numark CDMIX3 Bedienungsanleitung

Numark

Numark MixTrack Pro FX Bedienungsanleitung

Numark

Numark Party Mix Pro Bedienungsanleitung

Numark

Numark M2 Bedienungsanleitung

Numark

Numark DJ Equipment Gebrauchsanweisung

Numark

Numark NS6 Gebrauchs- und Wartungshandbuch

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung