Nuvoton NuMicro NuMaker-M051L Bedienungsanleitung

NuMaker-M051L

Dec. 26, 2022 Page 1of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

NuMicro® Family

Arm®Cortex®-M0-based Microcontroller

NuMaker-M051L

User Manual

Evaluation Board for NuMicro®M051 Series

The information described in this document is the exclusive intellectual property of

Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.

Nuvoton is providing this document only for reference purposes of NuMicro microcontroller and

microprocessor based system design. Nuvoton assumes no responsibility for errors or omissions.

All data and specifications are subject to change without notice.

For additional information or questions, please contact: Nuvoton Technology Corporation.

www.nuvoton.com

NuMaker-M051L 
 
Dec. 26, 2022 Page 2of 46 Rev 1.00 
NUMAKER-M051L USER MANUAL 
Maker Nu-mbed NUC472 User Manual 
 
Table of Contents 
1OVERVIEW......................................................................................................7 
2FEATURES......................................................................................................8 
3HARDWARE CONFIGURATION.....................................................................9 
1 Front View....................................................................................................................... 9
2 Rear View ..................................................................................................................... 10 
3 Extension Connectors................................................................................................. 11 
3.1 Pin Assignment for Extension Connectors .................................................................11 
3.2 Arduino UNO Compatible Extension Connectors......................................................14 
4 Power Supply Configuration ...................................................................................... 16 
4.1 VIN Power Source..........................................................................................................16 
4.2 5 V Power Sources ........................................................................................................16 
4.3 3.3 V Power Sources .....................................................................................................17 
4.4 1.8 V Power Sources .....................................................................................................17 
4.5 Power Connectors..........................................................................................................17 
4.6 USB Connectors .............................................................................................................18 
4.7 Power Switches ..............................................................................................................18 
4.8 Power Supply Models ....................................................................................................18 
5 Ammeter Connector.................................................................................................... 21 
6 Push Buttons................................................................................................................ 22 
7 LEDs.............................................................................................................................. 23 
8 Nu-Link2-Me................................................................................................................. 23 
8.1 VCOM Switches..............................................................................................................23 
8.2 Status LEDs ....................................................................................................................24 
4QUICK START...............................................................................................25 
1 Toolchains Supporting ................................................................................................ 25 
2 Nuvoton Nu-Link Driver Installation.......................................................................... 25 
3 BSP Firmware Download ........................................................................................... 27 
4 Hardware Setup........................................................................................................... 27 
5 Find the Example Project ........................................................................................... 29 
6 Execute the Project under Toolchains...................................................................... 29 
6.1 Keil MDK..........................................................................................................................29 
6.2 IAR EWARM....................................................................................................................33 
6.3 NuEclipse.........................................................................................................................35 
5NUMAKER-M051L SCHEMATICS................................................................41 
1 Nu-Link2-Me................................................................................................................. 41 
2 M051 Target Board...................................................................................................... 42 

NuMaker-M051L

Dec. 26, 2022 Page 3of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

5.3 Extension Connectors................................................................................................. 43

5.4 PCB Placement ........................................................................................................... 44

6REVISION HISTORY .....................................................................................45

NuMaker-M051L 
 
Dec. 26, 2022 Page 4of 46 Rev 1.00 
NUMAKER-M051L USER MANUAL 
Maker Nu-mbed NUC472 User Manual 
 
List of Figures 
Figure 1-1 NuMaker-M051L Evaluation Board ................................................................................ 7 
Figure 3-1 Front View of NuMaker-M051L....................................................................................... 9 
Figure 3-2 Rear View of NuMaker-M051L..................................................................................... 10 
Figure 3-3 M0516LDN Extension Connectors ............................................................................... 11 
Figure 3-4 Arduino UNO Compatible Extension Connectors......................................................... 14 
Figure 3-5 External Power Supply Sources on Nu-Link2-Me ........................................................ 18 
Figure 3-6 External Power Supply Sources on M051 Target Board.............................................. 19 
Figure 3-7 Detach the Nu-Link2-Me from NuMaker-M051L .......................................................... 20 
Figure 3-8 Wiring between Ammeter Connector and Ammeter..................................................... 22 
Figure 3-9 Project Path of SYS_PowerDown_MinCurrent ............................................................ 22 
Figure 4-1 Nu-Link USB Driver Installation Setup.......................................................................... 25 
Figure 4-2 Nu-Link USB Driver Installation.................................................................................... 26 
Figure 4-3 Open VCOM Function .................................................................................................. 27 
Figure 4-4 ICE USB Connector...................................................................................................... 27 
Figure 4-5 Device Manger.............................................................................................................. 28 
Figure 4-6 PuTTY Session Setting................................................................................................. 28 
Figure 4-7 Template Project Folder Path....................................................................................... 29 
Figure 4-8 Warning Message of “Device not found” ...................................................................... 29 
Figure 4-9 Project File Migrate to Version 5 Format...................................................................... 30 
Figure 4-10 Debugger Setting in Options Window......................................................................... 30 
Figure 4-11 Programming Setting in Options Window................................................................... 31 
Figure 4-12 Compile and Download the Project............................................................................ 31 
Figure 4-13 Keil MDK Debug Mode............................................................................................... 32 
Figure 4-14 Debug Message on Serial Port Terminal Windows.................................................... 32 
Figure 4-15 IAR EWARM Window................................................................................................. 33 
Figure 4-16 Compile and Download the Project............................................................................ 33 
Figure 4-17 IAR EWARM Debug Mode ......................................................................................... 34 
Figure 4-18 Debug Message on Serial Port Terminal Windows.................................................... 34 
Figure 4-19 Import the Project in NuEclipse .................................................................................. 35 
Figure 4-20 Import Projects Windows............................................................................................ 35 
Figure 4-21 Open Project Properties Window ............................................................................... 36 
Figure 4-22 Project Properties Settings......................................................................................... 36 
Figure 4-23 Build Project................................................................................................................ 37 
Figure 4-24 Open Debug Configuration......................................................................................... 37 
Figure 4-25 Main Tab Configuration .............................................................................................. 38 
Figure 4-26 Debugger Tab Configuration ...................................................................................... 38 

NuMaker-M051L

Dec. 26, 2022 Page 5of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

Figure 4-27 Startup Tab Configuration .......................................................................................... 39

Figure 4-28 NuEclipse Debug Mode.............................................................................................. 40

Figure 4-29 Debug Message on Serial Port Terminal Windows.................................................... 40

Figure 5-1 Nu-Link2-Me Circuit...................................................................................................... 41

Figure 5-2 M051 Target Board Circuit ........................................................................................... 42

Figure 5-3 Extension Connectors Circuit ....................................................................................... 43

Figure 5-4 Front Placement ........................................................................................................... 44

Figure 5-5 Rear Placement............................................................................................................ 44

NuMaker-M051L

Dec. 26, 2022 Page 6of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

List of Tables

Table 3-1 Extension Connectors.................................................................................................... 11

Table 3-2 M0516LDN Full-pin Extension Connectors and GPIO Function List............................. 13

Table 3-3 Arduino UNO Extension Connectors and M0516LDN Mapping GPIO List ................... 15

Table 3-4 Vin Power Source.......................................................................................................... 16

Table 3-5 5 V Power Sources........................................................................................................ 16

Table 3-6 3.3 V Power Sources..................................................................................................... 17

Table 3-7 1.8 V Power Sources..................................................................................................... 17

Table 3-8 Power Connectors ......................................................................................................... 17

Table 3-9 USB Connectors ............................................................................................................ 18

Table 3-10 Power Switches ........................................................................................................... 18

Table 3-11 Supply External Power through Nu-Link2-Me ............................................................. 19

Table 3-12 Supply External Power for M051 Target Board........................................................... 21

Table 3-14 Ammeter Connector..................................................................................................... 21

Table 3-15 Push Buttons................................................................................................................ 22

Table 3-16 LEDs ............................................................................................................................ 23

Table 3-17 VCOM Function of Nu-Link2-Me.................................................................................. 23

Table 3-18 Operation Status LED Patterns ................................................................................... 24

NuMaker-M051L

Dec. 26, 2022 Page 7of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

1 OVERVIEW

The NuMaker-M051L is an evaluation board for Nuvoton NuMicro M0516LDN, M0516ZDN, M052LDN,

M052ZDN, M054LDN, M054ZDN, M058LDN, and M058ZDN microcontrollers. The NuMaker-M051L

consists of two parts: an M051 target board and an on-board Nu-Link2-Me debugger and programmer.

The NuMaker-M051L is designed for project evaluation, prototype development and validation with

power consumption monitoring function.

The M051 target board is based on NuMicroM0516LDN. For the development flexibility, the M051 target

board provides the extension connectors, the Arduino UNO compatible headers and the capability of

adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter connector can measure

the power consumption instantly, which is essential for the prototype evaluation.

In addition, there is an attached on-board debugger and programmer “Nu-Link2-Me”. The Nu-Link2-Me

supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me

supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming

status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the

evaluation board and become a stand-alone mass production programmer.

Figure 1-1 NuMaker-M051L Evaluation Board

NuMaker-M051L

Dec. 26, 2022 Page 8of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

2 FEATURES

NuMicro M0516LDN used as main microcontroller with function compatible with:

–M0516LDN

–M0516ZDN

–M052LDN

–M052ZDN

–M054LDN

–M054ZDN

–M058LDN

–M058ZDN

M0516LDN full pins extension connectors

Arduino UNO compatible extension connectors

Ammeter connector for measuring the microcontroller’s power consumption

Flexible board power supply:

–External VDD power connector

–Arduino UNO compatible extension connector Vin

–USB PWR connector on M051 target board

–ICE USB connector on Nu-Link2-Me

On-board Nu-Link2-Me debugger and programmer:

–Debug through SWD interface

–Online/offline programming

–Virtual COM port function

NuMaker-M051L

Dec. 26, 2022 Page 9of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

3 HARDWARE CONFIGURATION

3.1 Front View

ICE USB Connector

VCOM Switch

Reset Button

ICE Status LED

Off-line Program Button

USB PWR Connector

Power LED

P3.6 LED

VDD Switch

M0516LDN M0516LDN Extension Connectors

Arduino UNO Compatible Extension Connectors

External VDD Connector

Nu-Link2-Me

Ammeter

ICE Chip: M48SSIDAE

External VSS Connector

M051 Target Board

Figure 3-1 Front View of NuMaker-M051L

Figure 3-1 shows the main components and connectors from the front side of NuMaker-M051L. The

following lists components and connectors from the front view:

Target chip: M0516LDN (U1)

USB PWR Connector (J2)

Arduino UNO Compatible Extension Connectors (NU1, NU2, NU3, NU4)

M051L Extension Connectors (JP3, JP4, JP5 and JP6)

External VDD Power Connector (JP1)

External VSS Power Connector (JP2)

VDD Switch (SW2)

Ammeter Connector (AMMETER)

Reset Button (SW1)

Power LED and P3.6 LED (LEDG1 and LEDR1)

Nu-Link2-Me

–VCOM Switch

–ICE Chip: M48SSIDAE (ICEU2)

–ICE USB Connector (ICEJ3)

–ICE Status LED (ICES0, ICES1, ICES2, ICES3)

–Off-line Program Button (ICESW1)

NuMaker-M051L

Dec. 26, 2022 Page 10 of 46 Rev 1.00

NUMAKER-M051L USER MANUAL

Maker Nu-mbed NUC472 User Manual

3.2 Rear View

Figure 3-2 shows the main components and connectors from the rear side of NuMaker-M051L.

The following lists components and connectors from the rear view:

Nu-Link2-Me

–MCUVCC Power Switch (ICEJPR1)

–ICEVCC Power Switch (ICEJPR2)

ICEVCC Power Switch

MCUVCC Power Switch

Figure 3-2 Rear View of NuMaker-M051L

Inhaltsverzeichnis

Andere Nuvoton Mikrocontroller Handbücher

Nuvoton

Nuvoton NuMicro M2351 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro M032 Series Bedienungsanleitung

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

Nuvoton

Nuvoton NuMicro M031 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro M032 Series Bedienungsanleitung

Nuvoton

Nuvoton emWin NUC126 Bedienungsanleitung

Nuvoton

Nuvoton NuMicro series Bedienungsanleitung

Nuvoton

Nuvoton Numicro NuMaker-NUC1311L Bedienungsanleitung

Nuvoton

Nuvoton ARM Cortex-M NuMicro NUC472 Series Bedienungsanleitung

Nuvoton

Nuvoton NuTiny-SDK-NUC442 Bedienungsanleitung

Nuvoton

Nuvoton NuMicro M23 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro Family Produkthandbuch

Nuvoton

Nuvoton NuMicro NuMaker-HMI-M2354 Bedienungsanleitung

Nuvoton

Nuvoton NUC970 series Produkthandbuch

Nuvoton

Nuvoton ARM ARM926EL-S Bedienungsanleitung

Nuvoton

Nuvoton NuMicro M480 Series Bedienungsanleitung

Nuvoton

Nuvoton I94100 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro M252 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro NUC100 Series Bedienungsanleitung

Nuvoton

Nuvoton NuMicro series Bedienungsanleitung

Nuvoton

Nuvoton NUTINY-SDK-M058SF Bedienungsanleitung

Nuvoton

Nuvoton MA35D1 Bedienungsanleitung

Nuvoton

Nuvoton Nu-LVMDM-MOS Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung