NuWaves NuPower 11B02A-TAC2 Bedienungsanleitung

USER MANUAL

NUPOWERTM 11B02A-TAC2

MINI MULTI-OCTAVE POWER AMPLIFIER

W/ INTEGRATED HEATSINK

PART NUMBER:

NW-PA-11B02A-TAC2

NuWaves Engineering

132 Edison Drive

Middletown, Ohio 45044

PH: 513-360-0800

FAX: 513-539-8782

www.nuwaves.com

sales@nuwaves.com

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

1NUPOWERTM PRODUCT LINE OVERVIEW

The NuPower family of solid state RF power amplifier (PA) modules is designed to meet the demanding

needs of the Aerospace & Defense, Industrial, and Commercial markets. Based on the latest gallium nitride

(GaN) technology, NuPower’s power efficiency and miniature form factor make it ideal for size, weight,

and power-constrained broadband RF telemetry and tactical communications systems.

1.1 NUPOWERTM PRODUCT LINE HIGHLIGHTS

•High Performance: Unique combination of broadband coverage, miniature form factors, and high

efficiency.

•Enclosures: The NuPower family of power amplifiers is housed in a silver nickel plated aluminum

enclosure with mounting holes incorporated into the chassis.

•Completely Characterized: The NuPower family of solid state power amplifiers has been

completely characterized over temperature, voltage, and frequency. These high-performance

modules offer significant value for the OEM user or the Systems Integrator.

•User Friendly: Reverse-Voltage & Over-Voltage protection and regulator thermal shutdown

provide defenses against user interface issues.

•High Reliability: NuWaves’ selection of conservatively rated components provides high reliability.

Each NuPower is inspected to IPC-A-610 Class II quality standards. NuWaves’ Quality Management

System is AS9100:2016 Rev D and ISO 9001:2015 certified.

•Applications: Unmanned Aircraft Systems (UAS) •Unmanned Ground Vehicles (UGV) •Unmanned

Surface Vehicles (USV) •Broadband RF Telemetry •RF Communication Systems •Software Defined

Radios •Test Labs

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

2NUPOWERTM MINI MULTI-OCTAVE PA OVERVIEW

The NuPowerTM 11B02A-TAC2 Mini Multi-Octave Power Amplifier (MOPA) is a highly efficient, miniature

solid state power amplifier that provides 10 watts (typical) of RF power across multiple octaves, from high

VHF through S-band.

Based on the latest gallium nitride (GaN) technology, the NuPower 11B02A-TAC2’s power efficiency and

23.63 cubic inch form factor make it ideal for size, weight, and power-constrained broadband RF telemetry

and tactical communication systems.

The NuPower 11B02A-TAC2’s rugged IP67-rated chassis with integrated heat sink allows the system

integrator or operator to easily incorporate the unit into a platform operating in harsh environments with

limited space, such as a tactical vehicle or manpack.

Figure 1: NuPower 11B02A-TAC2 Functional Diagram

2.1 NUPOWER 11B02A-TAC2 SPECIFICATIONS

The subsequent tables in this section outline the NuPower 11B02A-TAC2’s performance specifications.

Table 1: NuPower 11B02A-TAC2 Electrical Specifications

Parameter

Specification

Frequency Range

200 MHz to 2.6 GHz

RF Output Power

7 Watts (min)*

RF Gain

40 dB (typ)

2nd Harmonic

≤-10 dBc

Supply Voltage

+11 to +32 VDC

Current Consumption

1.4 A @ +28 VDC (typ)

Nominal Input Drive Level

0 dBm

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

Maximum Input Drive Level

(No damage)

+10 dBm

Power Amplifier Enable

GND On

Impedance

50 Ω

*The NuPower 11B02A-TAC2 will provide 10 watts (typ) RF output power across 200 MHz to 2.6 GHz

with an input drive level of +3 dBm.

Table 2: NuPower 11B02A-TAC2 Environmental Specifications

Operating Conditions

Specification

Operating Temperature -

Ambient

-40 to +60 oC

Operating Temperature -

Baseplate

-40 to +85 oC

Storage Temperature

-55 to +85 oC

Table 3: NuPower 11B02A-TAC2 Mean Time Between Failure (MTBF)

Conditions

Hours

Ground Benign (GB)

645,936

Airborne Inhabited Cargo (AIC)

217,065

Airborne Inhabited Fighter (AIF)

181,272

Airborne Uninhabited Cargo (AUC)

74,792

Airborne Uninhabited Fighter (AUF)

63,350

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

2.2 NUPOWER 11B02A-TAC2 MECHANICAL SPECIFICATIONS

Figure 2: NuPower 11B02A-TAC2 Mechanical Outline

Table 4: NuPower 11B02A-TAC2 Mechanical Specifications

Parameter

Specification

RF Connectors

Input

Output

TNC (Female)

N (Female)

Control / Power Interface Connector

4 Pin Bayonet (socket)

Dimensions (L x W x H)

4.50”x 3.50”x 1.50”

Weight

20 oz.

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

2.3 HEAT SINKING

The NuPower 11B02A-TAC2 features an integrated heatsink. The chassis/integrated heatsink was

designed for short-duration transmit periods. If chassis temperature is allowed to exceed 85°C (default),

the Temp Fault line will go low (0VDC) and bias to internal amplifiers will be removed until cooled to

approximately 70°C.

Note: If desired, factory can reduce thermal shutdown point to protect users if worn on body. Contact

[email protected] to request changes.

Figure 3: Chassis Temp vs. Time [@22°C Ambient, 25W Power Dissipation (average in band), 0dBm

Input, CW]

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

Chassis Temp (°C)

Time (m)

11B02A-TAC2 Chassis Temperature vs. Transmit Time

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

3SETUP AND OPERATION

This section provides specific details for proper operation of the NuPower 11B02A-TAC2 module.

Following these guidelines will prevent damage to the power amplifier or external equipment.

3.1 POWER SUPPLY REQUIREMENTS

To operate the NuPower 11B02A-TAC2, ensure that the power supply has adequate overhead to source

the current demand of the RF power amplifier. The power supply source must provide a typical voltage of

+28 VDC with greater than 3 amps capability (or equivalent current based on acceptable 11-32V input

voltage range).

3.2 CONNECTING A PROPER LOAD TO THE ANTENNA TERMINAL

To prevent damage to the PA, the antenna terminal must be terminated into a 50 Ωload. Examples of a

proper load include:

•Directly connecting to an antenna specified for the frequency range (200 MHz to 2.6 GHz).

Connecting to an inappropriate antenna may result in damage to the PA module.

•Connecting to a proper antenna through a 50 Ωtransmission line or coaxial cable. Avoid using

damaged cables or corroded connectors while attaching the unit to an antenna.

•Terminating the antenna terminal into a 50 Ωpower attenuator with minimum 20 dB attenuation.

•Connecting to a load capable of dissipating the RF power from the PA module. Loads capable of

handling 30 Watts (min) are recommended.

3.3 POWERING-UP THE 11B02A-TAC2

The NuPower 11B02A-TAC2 must be terminated to a proper load before power is applied. Refer to Section

3.2 for the specifications of the proper load. After the PA is properly terminated, the interface cable can

be connected to the unit and power can be applied. The PA is now ready for operation.

3.4 TRANSMIT TURN-ON TIME

Caution: Do not apply transmit data until the PA module is at full power. This will prevent

loss of data at the beginning of a message.

The NuPower 11B02A-TAC2 is at full power approximately 30 µS after the RF Enable switch is placed in

the ‘ON’ position. Therefore, transmit data can be applied to the input after 30 µS without loss of data.

3.5 RF OUTPUT POWER VS. SUPPLY VOLTAGE

Although the NuPower 11B02A-TAC2 was designed for +28 VDC operation, the module is capable of

providing suitable RF power output over a broad range of supply voltages: +11 VDC to +32 VDC.

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

3.6 DC POWER SWITCH

The DC Power Switch on the front panel will allow or remove power applied to the V Supply pin. This

enables the user to connect a battery or power supply to the module without consuming unwanted

power. Connect the interface cable to a power source and place switch toward ‘DC Power’ position to

place the amplifier in standby mode.

3.7 RF ENABLE

The RF Enable line on the external interface cable controls the internal amplifiers’ bias. When the RF

Enable line is left floating, the NuPower 11B02A-TAC2 will be in standby mode. Pulling the line low (-

0.5VDC to +1.5VDC, or GND) will place the module in transmit mode.

Note: The RF Enable line is pulled high internally and does not require applying a voltage.

3.8 TEMPERATURE FLAG

The Temp Flag line on the external interface cable is an indicator of an over-temperature condition in the

NuPower 11B02A-TAC2. A Logic HIGH (+5VDC) signal indicates normal operation, while a Logic LOW

(0VDC) indicates an over-temperature fault condition. The NuPower 11B02A-TAC2 incorporates internal

logic circuitry that turns off the DC bias to the RF transistors to naturally allow the module to cool off.

Default thermal shutdown point is +85°C and will restore bias and be fully functional when unit cools to

approximately 70°C.

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

4HARDWARE INTERFACE

•The RF Input connector is TNC (female).

•The RF Output connector is N-type (female).

•The pin-out definitions for the 4 pin bayonet connector are provided in Table 5.

The RF Out N-type connector is the antenna connection. This connection should

always be loaded into 50 Ω, otherwise the PA could be damaged.

4.1 INTERFACE CABLE HARNESS

The cable harness that connects the host controller to the 4-pin bayonet connector of the NuPower

11B02A-TAC2 is made up of 4 wires.

Table 5: NuPower 11B02A-TAC2 Interface Pin-Out Definitions

Pin No.

Pin Name

I/0

Description

V Supply

Primary Power (+28 VDC)

GND

Signal and Power Ground

Temp Flag

Temperature Flag (5V=no

fault/0V=temp fault)

RF Enable

(Floating=standby/GND=bias

enable)

Figure 4: Bayonet Connector Socket Locations

NuPowerTM 11B02A-TAC2 User Manual

Rev 1.0

4.2 DC POWER

The nominal supply voltage for the NuPower 11B02A-TAC2 is +28 VDC; however, the amplifier module is

able to support operation over a supply voltage range of +11 to +32 VDC.

4.3 GROUND

The signal and power grounds are tied together in the PA module.

5PRODUCT DISPOSAL – END-OF-LIFE

Safety is a guiding principle of NuWaves RF Solutions. We ensure safe production and operation of our

products, as well as end-of-life disposal. Improper disposal can adversely affect the environment, wildlife

and human health. Please follow these guidelines when disposing of a NuWaves product:

•Do not remove the cover or any hardware

•Do not remove components from the circuit card assembly

•Do not incinerate

•Do not crush or shred

•Do not dispose of as unsorted municipal waste

•Do not export e-waste outside of the original destination country for recycling

•Utilize an e-Steward or ISO14001 certified e-waste recycler

•Consider export controls during recycler selection

•If a NuWaves product is incorporated into a larger system or sub-system, ensure that these

guidelines are followed at system end-of-life

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NuWaves Verstärker Handbücher

NuWaves

NuWaves HILNA GPS Bedienungsanleitung

NuWaves

NuWaves NUPOWER C30R01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER XTENDER C10RX01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER L60T01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER 15D05A-C01-S01 Bedienungsanleitung

NuWaves

NuWaves NuPower 12D05A Bedienungsanleitung

NuWaves

NuWaves NuPower 05E05A Bedienungsanleitung

NuWaves

NuWaves NuPower Xtender 12B04A-27 Bedienungsanleitung

NuWaves

NuWaves NW-SSPA-MINI-10W-0.225-2.6 Bedienungsanleitung

NuWaves

NuWaves W-BA-VU-4-GX01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER XTENDER C10RX03 Bedienungsanleitung

NuWaves

NuWaves NUPOWER 12B01A-D30 Bedienungsanleitung

NuWaves

NuWaves NUPOWER 13G05A Bedienungsanleitung

NuWaves

NuWaves NUPOWER XTENDER 12B04A-D30 Bedienungsanleitung

NuWaves

NuWaves NUPOWER XTENDER LS10S01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER 11B02A-TAC Bedienungsanleitung

NuWaves

NuWaves NW-PA-12B01A Bedienungsanleitung

NuWaves

NuWaves NUPOWER XTENDER VU4GX01 Bedienungsanleitung

NuWaves

NuWaves NUPOWER 12B01A-02 Bedienungsanleitung

NuWaves

NuWaves NuPower 12B01A Bedienungsanleitung

NuWaves

NuWaves NUPOWER LS75T01 Bedienungsanleitung

NuWaves

NuWaves HILNA LS-C026 Bedienungsanleitung

NuWaves

NuWaves NUPOWER S100A01 Bedienungsanleitung

NuWaves

NuWaves NuPower Xtender 12B04A Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung