Nvidia GeForce FX Series Bedienungsanleitung

reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise,

without the prior written permission of this company,

Disclaimer

We makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties,

merchantability or fitness for any particular purpose. Any software described in

this manual is sold or licensed "as is". Should the programs prove defective

following their purchase, the buyer (and not this company, its distributor, or its

dealer) assumes the entire cost of all necessary servicing, repair, and any

incidental or consequential damages resulting from any defect in the software.

Further, this company reserves the right to revise this publication and to make

changes from time to time in the contents hereof without obligation to notify any

person of such revision or change.

All brands or product names mentioned in this manual are trademarks or

registered trademarks of their respective companies.

NVIDIA GeForce FX Series

User’s Guide

FCC Statement / Macrovision Statement

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measure:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

The changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables must be used in order to compiliy with the emission

limit.

Macrovision

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other intellectual

property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited

Table of Content

III

s..............................................................................III

–

n...................................................................1

s.....................................................1

–

n....................................................1

–

k.........................................................................1

–

e.......................................................1

–

n.....................................................4

n..................................4

(

).................................................4

(

)....................................................................5

(

)....................................................................................6

(

)....................................................................................7

–

n...........................10

–

n...................................10

–

n................................................. 11

s.............................................. 11

r............................13

4.2.1 – nView ...............................................................................13

4.2.2 – Desktop Manager ............................................................13

Chapter 2 – hardware Installation

–

1.1 S

The NVIDIA GeForce FX GPU ushers in a new era of graphics and gaming. With the

GeForce FX powering your graphics experiences, you can run applications and

games at higher resolutions and at speeds never before possible. Everything a

bleeding-edge gamer desires is packed inside this powerhouse of a processor,

including the latest high-speed DDR2 memory, an expansive AGP 8X pipeline and

unparalleled IntellisampleTM technology driving scenes of unrivalled beauty at

unmatched speeds.

Power and performance, the two elements every gamer craves, are the heart and

soul of the GeForce FX. Powered by pure adrenaline and engineered with a passion

for perfection, the GeForce FX delivers cinematic effects beyond imagination. Its

CineFXTM engine produces gaming effects on par with the hottest motion pictures.

Combined with the industry’s first true 128-bit studio-quality color processing

technology, 3D worlds and characters are more real than anything that’s come

before.

–

zGraphics Card

zUser’s Guide

zDrivers & Utilities CD

–

zCaution :

Static electricity can severely damage electronic parts, Take these precautions :

Before touching any electronic part, drain the static electricity from your body. You

can do this by touching the internal metal frame of your computer while it’s

unplugged.

Chapter 2 – Hardware Installation

Do not remove a card from the anti-static container until you are ready to install it.

When you remove a card from your computer, place it back in its container.

Do not let your clothes touch any electronic parts.

When handling a card, hold it by its edges, and avoid touching its circuitry.

Before You Begin

Before your process next step, make sure your computer system meets the

peripheral requirements and switch to Standard VGA Display Driver.

Prepare Your Computer for Installation

Prior to working on your computer, make sure the power and any related equipment

are turned off.

How to Insert Your AGP Graphics Card

How to Connect the Monitor

Plug your monitor cable into the monitor connector on

your AGP graphics card. Make sure the other end of

the monitor cable is properly connected to your

monitor.

Chapter 2 – hardware Installation

Installation Procedure

zFor the first time installation

1. Locate the AGP bus expansion slot, make sure this slot is unobstructed.

2. Remove the corresponding expansion slot cover from the computer chassis.

3. Ground yourself to an anti-static mat or other grounded source.

4. Position the card directly over the AGP slot and insert one end of the card down

into the slot.

5. Be sure the metal contacts on the bottom of the host adapter are securely

seated in the slot.

6. Connect your analog monitor’s 15-pin VGA connector to the card and fasten the

retaining screws (if any).

7. Connect other cables and devices if available.

Now you are ready to install the driver and utilities.

zFor Systems with existing VGA card.

1. Change your display driver to Standard VGA Display Driver.

2. Shut down your computer and unplug all electrical cards.

3. Replace the existing VGA card with the new graphics card.

4. Restart your computer and install the new display driver.

Chapter 3 – Software Installation

–

zCaution:

zBefore installing the display driver, make sure your Windows Me/98/95 is

installed in VGA Mode and works fine.

zFor Windows 95 user. To take advantage of all the AGP features, please use

Windows 95 OSR2.1 or later version.

The AGP driver is required for non-Intel chipset. Please use correct AGP drive to

install for different chipset.

(

)

1. Start Windows Me/98/95.

2. Add New Hardware Wizard dialog box will

appear and detect as Standard PCI Graphic

Adapter ( VGA ).

3. Click Next to begin setup the VGA driver.

If the Windows ask you for your Windows

Me/98/95 CD, insert the CD, or change the

path to \Windows\System folder.

4. Windows will prompt you to

restart your Windows, Click Yes to

reboot.

5. After system reboot. You may

begin to setup NVIDIA VGA driver.

Chapter 3 – Software Installation

(

)

1. Start Windows Me/98/95. Click mouse

right button on the desktop and select

Properties from the popup menu, or double

clock on the Display icon from the Control

Panel folder.

2. Select Setting->Advanced, then

select Adapter page, and click

Change button.

3. When Update Device Drivers Wizard

Dialog box appears on screen, select

Display a list of all drivers, so you can select

the driver you want.

4. Select Standard Display Type

from the manufacturers and select

Standard PCI Display

Adapter( VGA ) from the models,

then click OK button.

5. After complete installing Standard

VGA Driver. Click Close button and

restart Windows.

6. After System reboot. You may

begin to setup NVIDIA VGA Driver.

Chapter 3 – Software Installation

(

)

1. Start Windows Me/98/95,

2. Click mouse right button on the desktop

and select Properties from the popup menu,

or double clock on the Display icon from the

Control Panel folder.

3. Select Setting->Advanced, then

select Adapter page, and click

Change button

4. When Update Device Drivers Wizard

dialog box appears on the screen, select

Specify the location of the driver to show all

VGA devices.

5. Select “Display a list of all the

driver in a specific location”, and

click Next button.

Chapter 3 – Software Installation

(

)

1. Start Windows XP/2000 and insert the

Installation CD disk into the CD-ROM

drive.

2. Click mouse right button upon My

Computer and select Properties from the

popup menu.

3. Select Hardware and then click the

Device Manager button .

4. The Windows XP/2000 Device

Manager dialog appears, click

mouse right button upon Video

Controller in others device. Then

select Properties from popup menu.

6. Click Have Disk button from the Select

Device dialog box, Enter the Driver Path

( \NVIDIA\WinMe9x ) or click Browse button

to select driver folder.

7 Select your VGA model and click

OK to start install.

8. After complete installing VGA

Display Driver, please restart

Windows to enable VGA driver.

Andere Handbücher für GeForce FX Series

Inhaltsverzeichnis

Andere Nvidia Grafikkarte Handbücher

Nvidia

Nvidia GeForce2 - MX 400 64MB AGP Video Card Bedienungsanleitung

Nvidia

Nvidia Quadro FX 1700 Bedienungsanleitung

Nvidia

Nvidia Quadro Bedienungsanleitung

Nvidia

Nvidia Quadro 6000 Bedienungsanleitung

Nvidia

Nvidia GeForce MX Series Bedienungsanleitung

Nvidia

Nvidia GeForce RTX 2080 Ti Bedienungsanleitung

Nvidia

Nvidia Quadro GV100 NVLink Bridge Bedienungsanleitung

Nvidia

Nvidia VCQFX4500X2 Bedienungsanleitung

Nvidia

Nvidia GeForce 2 GTS Bedienungsanleitung

Nvidia

Nvidia MS-8808 Vanta TNT2 M64 Bedienungsanleitung

Nvidia

Nvidia QUADRO FX 3800 Bedienungsanleitung

Nvidia

Nvidia V6800GS-512P Bedienungsanleitung

Nvidia

Nvidia FX 1500 Gebrauchsanweisung

Nvidia

Nvidia Quadro GV100 NVLink Bridge Bedienungsanleitung

Nvidia

Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card... Bedienungsanleitung

Nvidia

Nvidia nForce 590 SLI Bedienungsanleitung

Nvidia

Nvidia GeForce GTX 980 Ti Bedienungsanleitung

Nvidia

Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card... Bedienungsanleitung

Nvidia

Nvidia Video-PX9000 series Bedienungsanleitung

Nvidia

Nvidia NVIDIA GEFORCE 7800 GT Gebrauchsanweisung

Nvidia

Nvidia FX 580 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

Nvidia

Nvidia GeForce 6 series Bedienungsanleitung

Nvidia

Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video... Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Gigabyte

Gigabyte GV-R7500L Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung