Nvidia Inno3D Bedienungsanleitung
Table of Contents
1. Welcome 1
2. Recommended System Requirements 1
3. SLI Configuration 1
4. Inno3D GeForce Graphics Card Installation 2
i. Uninstall old graphics card driver 2
ii. Hardware installation 2
iii. Connect external power supply to graphics card 2
5. Assemble your Inno3D SLI PC 3
5. Assemble your Inno3D SLI PC (CONT.) 4
6. Upgrading Your DirectX 5
7. Inno3D Geforce Graphics Card Driver Installation 5
8. Using TV Out, nView Multi-Display and HDTV Out 8
A. Using TV Out 8
B. Advanced Setting for TV out 9
Adjust the size and position of the screen on TV 9
Set Video Format 10
Force the detection of connected TV 10
C. nView Multi-Display 11
Enabling nView Multi-Display 11
nView Display Mode 11
D. HDTV Mode 12
Underscan 12
Overscan Shift 12
Native 13
9. Using Video-in (VIVO card only) 13
10. Customer service and support 15
11. Hardware Warranty Service Statement 15
12. Warranty service and limitations 15
13. Software License Agreement 15
14. FCC Statement 16
15. Copyright Notice 16
Inno3D GeForce Graphics Card User Manual
Page 1 of 16
1. Welcome
Thank you for purchasing Inno3D Graphics Accelerator card. Before experiencing the
ultimate performance on your graphics card, please read this manual carefully and retain it
for future reference.
2. Recommended System Requirements
For optimum performance, it is suggested that your system has the following
configurations:
-Intel® Pentium®4, AMD® Althon® or other compatible processors
-128MB system memory
-Optical Drive for software installation
-A power supply with 400-watt is recommended
-Operating system: Microsoft® Windows® XP / XP X64 / 2000
3. SLI Configuration
If you are planning on using this graphic card as part of an SLI system, the following is
required:
-An NVIDIA SLI-Ready nForce motherboard with NVIDIA SLI Connector*
-Two NVIDIA SLI-Ready add-in cards (with matching GPUs!)
-Minimum Power Supply Requirement of SLI PC
•Ultra High-End SLI PC:
You must have a power supply that can provide a minimum of +12V @ 22A of dedicated
power for the two graphics cards. Of this 22A requirement, +12V @ 5.5A must be available
to each of the two PCI Express 6-pin auxiliary power supply connectors. The remaining 11A
must be supplied to the motherboard for dedicated graphics card use.
•High-End SLI PC:
Minimum of 500-600W Power Supply with a minimum of +12V @ 30A for all PC
components.
•Mid-Range SLI PC:
Minimum of 450-500W Power Supply with a minimum of +12V @ 26A for all PC
components.
•Entry-Level SLI PC:
Minimum of 400-450W Power Supply with a minimum of +12V @ 22A for all PC
components.
* Note:
The NVIDIA SLI connector is not used with some mainstream graphics card models such as the
GeForce 6600 and GeForce 7300 series.
Inno3D GeForce Graphics Card User Manual
Page 2 of 16
4. Inno3D GeForce Graphics Card Installation
i. Uninstall old graphics card driver
It is recommended that you uninstall your existing display card driver before replacing your
old VGA card. Make sure your current graphics card is in your computer:
1. Close all applications
2. Click [Start], select [Control Panel], then double click [Add/Remove Programs].
3. Select your current graphics driver and click [Add/Remove…].
4. *The wizard will guide you to remove your current display driver.
5. The system should be restarted after the driver has been removed.
*If there is any software bundled with the previous graphics card that is installed, it is
suggested to remove them before installing the new card. (For example DVD player
software, multimedia applications etc.)
ii. Hardware installation
Make sure you have discharged any static electricity from your body by touching any metal
surface.
1. Power-off the computer and monitor
2. Disconnect the monitor cable from the back of your computer
3. Remove the computer cover
4. Remove any existing graphics card from your computer.
If your computer has an onboard display capability, you may need to disable it on
the motherboard. For more information, please refer to your motherboard
documentation.
5. Insert the card firmly into the slot until the card is fully seated.
6. Fasten the screw to make sure the card is properly aligned.
7. Replace the cover on your system.
8. Connect the monitor cable to the card and switch on the computer and monitor.
iii. Connect external power supply to graphics card
For Inno3D GeForce AGP graphics card, connect 4-pin hard disk drive power connector
when applicable.
For GeForce PCI-Express graphics card, connect PCI-Express power connector when
applicable. If power supply unit does not have PCI-Express power connector, use a 2x4-
pin to 6-pin PCI-Express power adaptor instead.
Inno3D GeForce Graphics Card User Manual
Page 3 of 16
5. Assemble your Inno3D SLI PC
Building your SLI system
1. Install the NVIDIA SLI-Ready Motherboard (per instructions in the accompanying manual)
2. Install both of the NVIDIA SLI-Ready graphics cards
3. Connect the PCI Express supplementary power connectors to each of the graphic
cards
Inno3D GeForce Graphics Card User Manual
Page 4 of 16
5. Assemble your Inno3D SLI PC (CONT.)
4. Install the NVIDIA SLI connector to connect the two graphics cards (The NVIDIA
SLI connector is not used with some mainstream graphics card models such as the
GeForce 6600 and Geforce 7300 series.)
5. Once the new NVIDIA SLI-certified components have been installed in the system,
they will be recognized by the operating system upon Windows boot-up. A Found
New Hardware message will be displayed
Inno3D GeForce Graphics Card User Manual
Page 5 of 16
6. Upgrading Your DirectX
The manufacturer renews DirectX from time to time. It is recommended that you download
from Microsoft website the latest version of DirectX and install it on your system
URL: http://www.microsoft.com/directx
7. Inno3D Geforce Graphics Card Driver Installation
The following procedure helps you to complete the driver installation. [Note: If you are
using Windows 2000/XP, you must have administrative right to perform this operation.]
** This installation guide is demonstrated by GeForce 6800 Ultra **
1. Turn on your computer.
2. After entering to Windows, the newly installed graphics card is detected and the Found
New Hardware screen is displayed. Click Cancel to exit so that you can install the
graphics card from Setup CD in next step.
3. Insert the Inno3D Universal Drivers CD to CD-Rom Drive, autorun window show up
automatically. [Note: If the program does not start, open “CDRomDrive:\Setup.exe” to
start it manually.]
4. Click INSTALL DRIVERS item on setup program menu and select the type of your
operating system.
Inno3D GeForce Graphics Card User Manual
Page 6 of 16
5. Installation of graphics card driver is started, click Next to continue.
6. The graphics card will be detected. If Windows warns you that the driver has not
passed Windows Logo testing, ignore the warning and click Continue Anyway to
continue the installation.
7. Click the Finish button to restart computer. Then the driver installation is completed.
Inno3D GeForce Graphics Card User Manual
Page 7 of 16
8. As part of the NVIDIA Unified Driver Architecture, NVIDIA drivers include a full set of
controls for SLI systems. Once you have installed the NVIDIA SLI components and
booted up your system, you will see an SLI Capable System message.
i) Click on the SLI capable system message to open the following window.
ii) Select the checkbox Enable SLI technology and then click Apply.You now
have an NVIDIA SLI-enabled PC!
iii) [Optional] You can also access these settings by opening the NVIDIA Control
Panel (right-click on desktop), clicking on 3D Settings (shown below) and then
selecting "Set SLI configuration".
Inno3D GeForce Graphics Card User Manual
Page 8 of 16
8. Using TV Out, nView Multi-Display and HDTV Out
A. Using TV Out
1. Right click on desktop and open NVIDIA Control Panel
2. Enter Display category
3. Select Change Display Configuration option
[Note: The option of nView Display Mode is only available when TV or second monitor
has been connected to graphics card.]
4. Set nView Modes as Single display and Current display as TV. Then click Apply,
video will be shown on TV.
Inhaltsverzeichnis
Andere Nvidia Grafikkarte Handbücher
Nvidia
Nvidia NVIDIA Quadro FX 540 Bedienungsanleitung
Nvidia
Nvidia QUADRO SYNC Bedienungsanleitung
Nvidia
Nvidia 4000 - e-GeForce MX 128MB DDR PCI Graphics... Bedienungsanleitung
Nvidia
Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video... Bedienungsanleitung
Nvidia
Nvidia GeForce GTX 660 TI Bedienungsanleitung
Nvidia
Nvidia Quadro GV100 NVLink Bridge Bedienungsanleitung
Nvidia
Nvidia VCQFX4500X2 Bedienungsanleitung
Nvidia
Nvidia Quadro 6000 Bedienungsanleitung
Nvidia
Nvidia geforce4 MX420 Bedienungsanleitung
Nvidia
Nvidia GV-N430-2GI Bedienungsanleitung
Nvidia
Nvidia Quadro K6000 Bedienungsanleitung
Nvidia
Nvidia Quadro FX 3700 Gebrauchsanweisung
Nvidia
Nvidia GeForce 6 series Bedienungsanleitung
Nvidia
Nvidia VCQFX4500X2 Handbuch
Nvidia
Nvidia Quadro RTX Bedienungsanleitung
Nvidia
Nvidia Quadro K6000 Bedienungsanleitung
Nvidia
Nvidia 5700 - ASUS V9570 Series GeForce FX AGP 256MB S-VId DVI VGA Video... Bedienungsanleitung
Nvidia
Nvidia GeForce GTX Handbuch
Nvidia
Nvidia V6800GS-512P Bedienungsanleitung
Nvidia
Nvidia GeForce 8500 GT Bedienungsanleitung
Beliebte Grafikkarte Handbücher anderer Marken
Gainward
Gainward GeForce GTX 690 4GB Bedienungsanleitung
ATI Technologies
ATI Technologies RADEON 137-40225-20 Bedienungsanleitung
MSI
MSI N220GT series Bedienungsanleitung
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung
SIIG
SIIG aurora Bedienungsanleitung
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung
