Oakley HOLESHOT Bedienungsanleitung

TABLE OF CONTENTS

ENGLISH 02-17

ESPAÑOL 18-33

FRANCAIS 34-49

ITALIANO 50-65

PORTUGUÊS 66-81

MAGYAR 82-97

DEUTSCH 98-113

JAPANESE 114-129

HOLESHOT

The technology of performance becomes the art of style with Oakley Holeshot, an

invention that brings sport into life. This true Swiss Made timepiece optimizes

accuracy with the precision of Swiss movement. It features an onboard

chronograph that conveniently measures cumulative time, intermediate time and

split time down to a tenth of a second.

Rugged meets refined in a durable chassis of 316L stainless steel that cradles a

six-hand analog display, shielded by a pure sapphire crystal. A band of supple

Unobtainium® offers a comfortable fit. The date display can be read at a glance,

and luminous phosphors on the minute and hour hands improve visibility in low

light. Water resistance is 10 bar, equivalent to the pressure at a depth of 330 feet

(100 meters).

02 HOLESHOT INSTRUCTION MANUAL

HOLESHOT INSTRUCTION MANUAL 03

SETTING THE TIME

The crown can be pulled out to two click positions for setting the date and time.

To set the date and time the first time (or to reset the date and time after the

battery is changed), do the following:

TO SET THE TIME

1. Pull the crown out to the first click

position (a).

2. Turn the crown until yesterday’s date appears.

3. Pull the crown out to the second click

position (b).

4. Turn the hands forward until today’s date

appears, then continue forward until the

current time is reached. If the current time

is in the afternoon or evening, move the

hour hand all the way around the dial to

pass 12 o’clock noon.

5. Push the crown back down. To set the

exact second, wait until the hand in the

second-counting sub dial (at the bottom of

the main dial face) reaches “60” before

you pull out the crown. Set the time then

wait until the exact second is reached

before pushing the crown back down.

Button A

Button B

Date

Crown

TO ADJUST THE TIME AND DATE FOR SUBSEQUENT SETTINGS,

USE THESE SHORT PROCEDURES

TO SET THE TIME

1. Pull the crown out to the second click position (b).

2. Turn the crown until you reach the correct time.

3. Push the crown back down.

TO SET THE DATE

1. Pull the crown out to the first click

position (a).

2. Turn the crown until you reach the

correct date. If the current time is

between 9 PM and midnight, set the

date to the following day.(This is

necessary to ensure the date display

will normally change at midnight

instead of 12 noon.)

3. Push the crown back down.

04 HOLESHOT INSTRUCTION MANUAL

Button A

Chronograph

1/10 Second

Chronograph

Minutes

Seconds

Chronograph

Second Hand

Button B

Date

Crown

HOLESHOT INSTRUCTION MANUAL 05

USING THE CHRONOGRAPH

The chronograph includes three separate hands:

• The narrow hand on the main dial face counts seconds. One full rotation is

60 seconds.

• The hand on the sub dial at the left counts minutes. One full rotation is

30 minutes.

• The hand on the sub dial at the right counts 1/10 seconds. One full rotation

is 1 second.

The chronograph is controlled with two push buttons:

• Button “A” stops and starts the timer.

•Button “B” has several functions. In addition to pausing the display at the

current intermediate or “split” time, it allows the chronograph hands to catch

up to the ongoing time being measured, and it resets the chronograph hands

to the zero position.

Before using the chronograph functions, make sure the crown is fully against the

case and not at one of the click positions used for setting time and date. The

three chronograph hands should align precisely at the zero position. If they do

not, see the section on Adjusting the Chronograph Hands.

TO MEASURE CUMULATIVE TIME

START TIMING

Press button “A”.

STOP TIMING TEMPORARILY

Press button “A” to stop timing temporarily.

Press button “A” again to restart timing.

Continue to use button “A” to add

additional time intervals to the total

measure of time. When using button

“A” only, the time that occurs while the

chronograph hands are not moving IS

NOT ADDED to the total measure of

time. See the section on “To measure

intermediate time” if you wish to

include this “intermediate time” in the

total measure of time.

RESET

While timing is stopped, press button “B”.

06 HOLESHOT INSTRUCTION MANUAL

Button A

Button B

TO MEASURE INTERMEDIATE TIME / SPLIT TIMEGUARDING

START TIMING

Press button “A”.

PAUSE HANDS BUT CONTINUE TIMING

Press button “B” to pause the chronograph hands and read the current time total.

Although the hands are no longer moving, time is still being measured.

Press button “B” again to move the hands to the currently running time total.

Continue to use button “B” to pause the hands when desired. Time continues to

be measured.

STOP TIMING AND DISPLAY THE FINAL TIME TOTAL

While the hands are moving, press button “A” to fully stop timing and display the

total time measured.

RESET

While timing is stopped, press button “B”.

HOLESHOT INSTRUCTION MANUAL 07

USING THE TACHYMETER

The number scale around the rim of the dial face can be used to compute speed

based on travel time. Only speeds above “60” can be measured, but they can be

in miles per hour, kilometers per hour, or another unit of measure per hour.

TO MEASURE SPEED

START TIMING AT MARKER

When you reach a distance marker

(such as a mile or kilometer marker),

press button “A”.

STOP TIMING AT NEXT MARKER

When you reach the next marker,press

button “A” to stop timing.

The hand that counts seconds now

points to your speed on the tachymeter

scale. (Example: If mile markers were

used and the hand now points to “65,”

your speed is 65 mph.)

RESET

While timing is stopped, press button “B”.

08 HOLESHOT INSTRUCTION MANUAL

100

120

140

160

240

300

180

200

400

500

Button A

Tachymeter

Chronograph

Second Hand

Button B

HOLESHOT INSTRUCTION MANUAL 09

POWER SAVING MODE

When the timepiece is not in use, the battery life can be prolonged by pulling the

crown out to the second click position (b). This will stop the hands and reduce

power consumption.

Inhaltsverzeichnis

Sprachen:

Andere Oakley Betrachten Handbücher

Oakley

Oakley OAKLEY TRANSFER CASE Bedienungsanleitung

Oakley

Oakley CRANKCASE Bedienungsanleitung

Oakley

Oakley DOUBLE TAP Bedienungsanleitung

Oakley

Oakley Crush Bedienungsanleitung

Oakley

Oakley TimeBomb Bedienungsanleitung

Oakley

Oakley OAKLEY GEARBOX Bedienungsanleitung

Oakley

Oakley BLADE II Bedienungsanleitung

Oakley

Oakley Torpedo Bedienungsanleitung

Oakley

Oakley WARRANT Bedienungsanleitung

Oakley

Oakley GMT Bedienungsanleitung

Oakley

Oakley D1 Bedienungsanleitung

Oakley

Oakley JUDGE II Bedienungsanleitung

Oakley

Oakley Bullet Bedienungsanleitung

Oakley

Oakley Saddleback Bedienungsanleitung

Oakley

Oakley Judge Bedienungsanleitung

Oakley

Oakley Jury II Bedienungsanleitung

Oakley

Oakley Hollow Point Bedienungsanleitung

Oakley

Oakley Bottle Cap Bedienungsanleitung

Oakley

Oakley Full Metal Jacket Bedienungsanleitung

Oakley

Oakley JUDGE II Bedienungsanleitung

Oakley

Oakley OAKLEY GEARBOX AUTOMATIC Bedienungsanleitung

Oakley

Oakley kill switch Bedienungsanleitung

Oakley

Oakley Jury II Bedienungsanleitung

Oakley

Oakley D2 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung