Oakley JUDGE II Bedienungsanleitung

TABLE OF CONTENTS

ENGLISH 1-10

ESPAÑOL 11-20

FRANCAIS 21-30

ITALIANO 31-40

PORTUGUÊS 41-50

MAGYAR 51-60

DEUTSCH 61-70

JAPANESE 71-80

JUDGE®II INSTRUCTION MANUAL 01

JUDGE®II

The precision of ten-jewel Swiss movement is matched with an oscillator circuit that counts each second as

32,768 vibrations of a crystal tuning fork. This true chronograph features a sub dial for measuring elapsed min-

utes and hours, plus a sweeping second hand that accelerates to the current moment when pause is released.

The band is available in natural leather or the highest grade of surgical stainless steel with a filled backing of

Unobtainium®for the comfort of reduced weight.The instrument also features a large date display, a 48-month

endurance battery and the hardest crystal utilized in watchmaking, pure sapphire, with a magnifying window

to optimize the viewing of the sub dial.

SETTING THE DATE AND TIME

For normal use, the crown rests against the case

to maintain a protective seal. The crown can be

pulled out to two click positions for setting the date

and time.

To ensure that the date-change function activates at

midnight (and not at noon), synchronize the timepiece

by doing the following:

TO SET THE DATE AND TIME:

1. Pull the crown out to the first click position (a).

2. Turn the crown clockwise and set the date to

yesterday’s date.

3. Pull the crown out to the second click position

(b).

4. Turn the hands forward until today’s date appears,

then continue forward until the current time is

reached. If the current time is in the afternoon or

evening, move the hour hand all the way around

the dial to pass 12 o’clock noon.

5. Push the crown back down against the case.

POS A POS B

Button B

Button A

Hour hand

Chrono

minute hand Chrono hour

hand

Minute hand

Chrono second hand

Crown

Button B

Button A

Button B

Button A

Button B

Button A

p2-3

Chrono

minute hand Chrono

hour hand

Chrono second hand

02 JUDGE®II INSTRUCTION MANUAL

USING THE CHRONOGRAPH

The chronograph includes three separate hands. A hand on the main dial face counts seconds. Minutes and

hours are counted on the sub dial. One complete rotation of the minute hand represents 30 minutes. One

complete rotation of the hour hand represents 12 hours.

The chronograph is controlled with two push buttons. Button “A” starts and stops the timer. Button “B” has four

functions. In addition to pausing the display at the current intermediate time, it allows the chronograph hands

to catch up to the ongoing time being measured; it displays a second time total; and it resets the chronograph

hands to the zero position.

Before using the chronograph functions, ensure that the crown is fully against the case and not at one of the

click positions used for setting time and date. The three chronograph hands should align precisely at the zero

position. If they do not, see the section on page 5 on Adjusting the Chronograph Hands.

POS A POS B

Button B

Button A

Hour hand

Chrono

minute hand Chrono hour

hand

Minute hand

Chrono second hand

Crown

Button B

Button A

Button B

Button A

Button B

Button A

p2-3

Chrono

minute hand Chrono

hour hand

Chrono second hand

TO MEASURE ACCUMULATED TIME:

1. Press button “A” to start timing.

2. Press button “A” again to stop timing.

3. Press button “A” again to restart timing.

Continue to use button “A” to add time intervals to

the total measure of time. When using button “A”

only, intermediate time (while the chronograph

hands are not moving) is not added to the total

measure of time.

4. While timing is stopped, press button “B” to reset

the chronograph hands to the zero position.

JUDGE®II INSTRUCTION MANUAL 03

USING THE CHRONOGRAPH

POS A POS B

Button B

Button A

Hour hand

Chrono

minute hand Chrono hour

hand

Minute hand

Chrono second hand

Crown

Button B

Button A

Button B

Button A

Button B

Button A

p2-3

Chrono

minute hand Chrono

hour hand

Chrono second hand

TO MEASURE INTERMEDIATE TIME:

1. Press button “A” to start timing.

2. Press button “B” to pause the chronograph hands.

Although the chronograph hands are no longer

moving, time is still being measured.

3. Press button “B” again to move the chronograph

hands to the currently running time total.

Continue to use button “B” to pause the chrono-

graph hands when desired.

4. While the chronograph hands are moving, press

button “A” to fully stop timing and display the total

measured time.

(Pressing button “A” while the chronograph hands

are stopped allows you to display a second total

time, as described on the following page.)

5. Use button “A” to restart and stop timing as

desired.

6. While timing is stopped, press button “B” to reset

the chronograph hands to the zero position.

04 JUDGE®II INSTRUCTION MANUAL

USING THE CHRONOGRAPH

POS A POS B

Button B

Button A

Hour hand

Chrono

minute hand Chrono hour

hand

Minute hand

Chrono second hand

Crown

Button B

Button A

Button B

Button A

Button B

Button A

p2-3

Chrono

minute hand Chrono

hour hand

Chrono second hand

TO MEASURE A SECOND TIME TOTAL:

1. Press button “A” to start timing.

2. Use button “B” to pause the chronograph hands

as desired.

3. While the chronograph hands are moving, press

button “B” to display the first time total.

Although the chronograph hands are no longer mov-

ing, time is still being measured.

4. Press button “A” when you reach the moment for

marking the second finishing time, then press but-

ton “B” to display the second time total.

5. Press button “B” to reset the chronograph hands to

the zero position.

TO ADJUST THE CHRONOGRAPH HANDS:

1. If the chronograph hands currently show a mea-

sured time, use button “B” to reset them near the

zero position.

Note that the hands must be stopped with button

“A” to allow button “B” to reset them.

2. Pull the crown out to the second click position (b).

3. Press button “A” and button “B” at the same time

and keep them pressed for at least two seconds.

This puts the chronograph in correction mode.

4. Press button “A” to adjust the chronograph hand

that measures seconds. Each press moves the

hand one short step; press and hold the button for

continuous movement.

5. Press button “B” then use button “A” to adjust

the chronograph hands that measure minutes and

hours. Each press of button “A” moves the minute

hand one short step; press and hold the button for

continuous movement.

6. Push the crown back down against the case.

POS A POS B

Button B

Button A

Hour hand

Chrono

minute hand Chrono hour

hand

Minute hand

Chrono second hand

Crown

Button B

Button A

Button B

Button A

Button B

Button A

p2-3

Chrono

minute hand Chrono

hour hand

Chrono second hand

JUDGE®II INSTRUCTION MANUAL 05

ADJUSTING THE CHRONOGRAPH HANDS

When the chronograph is reset with button “B,” the three chronograph hands return to the zero position. If

the chronograph hands do not align precisely with the zero position (such as after a battery change), use the

following procedure to adjust them.

06 JUDGE®II INSTRUCTION MANUAL

BATTERY REPLACEMENT

The miniature battery that powers the chronograph is designed to last approximately four years. However,

because the battery is inserted at the factory for extensive performance checks, its actual life, once in your

possession, may be less.

Battery replacement may be performed only by an Authorized Oakley Service Center. Any attempt to open the

watch case by persons other than Authorized Oakley Service Professionals will void the product warranty.

Within the United States, call Oakley global headquarters at 1-800-403-7449 to find an Authorized Oakley

Timepiece Dealer or Service Professional near you. Customers outside the United States should contact their

local Authorized Oakley Timepiece Dealer or visit the Oakley website at www.oakley.com for the number of

the nearest Oakley distributor.

BAND ADJUSTMENT

STAINLESS STEEL BRACELET MODEL

If links need to be added or removed from the band, the adjustment should be done by an Authorized Oakley

Timepiece Dealer. Do not attempt to shorten the band by removing links yourself, as this may result in damage

to the bracelet.

LEATHER STRAP MODEL

The natural leather of the strap may stretch slightly during break-in, so adjust the fit accordingly.

CLEANING

Use a soft, clean cloth to wipe off any moisture that adheres to the case or band. Made of high-grade stainless

steel, the metal bracelet version of Judge®II will become soiled with dust and perspiration due to contact with skin.

Failure to keep the watch and case clean may result in a skin rash.

LEATHER CARE

Even the highest quality leather has a finite lifespan that may be reduced by excess wear and tear, exposure to the

natural acids in perspiration, and exposure to the environment. To maximize the longevity of leather components,

avoid direct contact with solvents and other chemicals; avoid prolonged exposure to sunlight; and avoid soaking

the components in water.

Andere Handbücher für JUDGE II

Inhaltsverzeichnis

Sprachen:

Andere Oakley Betrachten Handbücher

Oakley

Oakley HOLESHOT Bedienungsanleitung

Oakley

Oakley Chronograph Bedienungsanleitung

Oakley

Oakley BLADE II Bedienungsanleitung

Oakley

Oakley TIME BOMB II Bedienungsanleitung

Oakley

Oakley CRANKCASE Bedienungsanleitung

Oakley

Oakley DOUBLE TAP Bedienungsanleitung

Oakley

Oakley D2 Bedienungsanleitung

Oakley

Oakley CRANKCASE THREE-HAND Bedienungsanleitung

Oakley

Oakley GMT Bedienungsanleitung

Oakley

Oakley OAKLEY GEARBOX Bedienungsanleitung

Oakley

Oakley kill switch Bedienungsanleitung

Oakley

Oakley Full Metal Jacket Bedienungsanleitung

Oakley

Oakley 12 GAUGE Bedienungsanleitung

Oakley

Oakley BLADE II Bedienungsanleitung

Oakley

Oakley WARRANT Bedienungsanleitung

Oakley

Oakley Jury II Bedienungsanleitung

Oakley

Oakley TimeBomb Bedienungsanleitung

Oakley

Oakley Jury II Bedienungsanleitung

Oakley

Oakley Bullet Bedienungsanleitung

Oakley

Oakley Holeshot 3 Hand Bedienungsanleitung

Oakley

Oakley Saddleback Bedienungsanleitung

Oakley

Oakley DETONATOR Bedienungsanleitung

Oakley

Oakley D1 Bedienungsanleitung

Oakley

Oakley Crush Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung