Oase 280 Bedienungsanleitung

Pond Pump 280 / 420 / 575

Operating instructions

Notice d’emploi

Instrucciones de uso

- English -

REMINDER

CALL 1-866-627-3435

BEFORE RETURNING TO STORE.

Part Description QTY

A Pump 1

B3/4 in. ID tubing adapter with ow

control 1

Information about these operating instructions

Welcome to OASE Living Water. You made a great choice with the purchase of this product Pond Pump 280 / 420 /

575. Prior to operating the unit, please read the instructions of use carefully and fully familiarize yourself with the unit.

Ensure that all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the

enclosed instructions to ensure safe and correct handling of the product. Keep these instructions in a safe place. Please

also hand over the instructions when passing the unit on to a new owner.

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

WARNINGS AND CAUTIONS SYMBOLS

Symbols used in these instructions

The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Risk of personal injury caused by a general source of danger.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Important! The unit is equipped with a permanent magnet. The magnetic eld may affect the function of pacemakers.

Important information for trouble-free operation.

Intended use

Pond Pump 280 / 420 / 575, referred to in the following as “unit”, may only be used as specied in the following:

• For circulating and pumping normal pond water for lters and additional water features.

• Operation under observance of the technical data.

The following restrictions apply to the unit:

• Do not use in swimming pools.

• CAUTION - this pump has been evaluated for use with water only.

• Never run the unit without water.

• Do not use for commercial or industrial purposes.

• Do not use in conjunction with chemicals, food products, easily ammable or explosive substances.

• Do not connect to the domestic water supply.

• Do not exceed the voltage shown on the pump.

• Do not remove the grounding pin from the power cord plug.

• Inspect the power cord for damage before installation and maintenance.

Use other than that intended

This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance

with these instructions or modication(s) to the unit will void the limited warranty.

- English -

Installation

WARNING

Risk of electric shock – This pump is supplied with a grounding conductor and grounding-type attachment plug. To

reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type

receptacle.

1. Attach the adapter to the pump rst, then connect tubing

to the adapter.

NOTE: Tubing is NOT INCLUDED.

2. Attach the other end of the tubing to desired water

feature or UV clarier.

Start-up

Attention! The pump must never run dry.

Possible consequences: The pump will be destroyed.

Protective measures: Check the water level at regular intervals. Always place the unit below water level.

Attention! The installed temperature sensor automatically turns the pump off, if it is overloaded. The pump

automatically switches on again once the motor has cooled down. Risk of accident!

Install the unit so that it is not exposed to direct sun radiation (max. 104 ºF - 40 ºC).

Important:

● The unit switches on automatically when power connection

is established.

1. Switching on: Connect power plug to the socket.

2. Adjust the ow control to the preferred setting.

3. Switching off: Disconnect the power plug.

Important:

● Always place the unit below water level.

● It is recommened to place the unit horizontally on the ground ensuring its stable position.

● Do not lift the pump by its power cord.

Tubing

Adapter

Pump

2.+

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Maintenance and cleaning

Attention! Dangerous electrical voltage.

Possible consequences: Death or serious injuries.

Protective measures:

• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the

units and installations (switch off and disconnect from the power supply) before reaching into the water.

• Isolate the unit before starting any work.

• Secure the unit to prevent unintentional switching on.

WARNING

This pump uses a very strong magnet to achieve superior performance. When removing the impeller assembly there

will be considerable magnetic force resisting the extraction of the impeller assembly. This is normal. Likewise when

replacing the impeller assembly there will be a strong magnetic force pulling the assembly into the pump to potentially

cause injury to ngers and in rare cases damaging the ceramic shaft or rear bearing. Use thick gloves when replacing

the impeller assembly.

Cleaning the unit

●Regular cleaning of the pump may be necessary depending

upon the environment in which it is operated. Clean the pump

when it is visibly soiled or when a drop in performance is

detected. Clean the unit with warm water using a soft brush.

●Never use aggressive cleaning agents or chemical solutions.

These could attack the housing surface or impair the function.

●In the event of stubborn furring (calcium deposits), a common

household cleaner free from vinegar and chlorine can be used.

Subsequently, clean the pump thoroughly using warm water.

Cleaning the pump

1. Disconnect the pump from the power source.

○ Disconnect the tubing.

2. Remove the screen and disassemble the impeller

housing to expose the impeller assembly.

3. For Pond Pump 280 / 420, remove the impeller

assembly by gently pulling on the impeller blades.

For Pond Pump 575 remove the impeller assembly by

pulling on the back round plate behind the impeller.

4. Use a soft cloth or brush to clean the impeller assembly

and the inside of the impeller housing.

●Check parts for damages such as cracked rotor, shaft or

bearing, cracks in the magnet, and broken plastics.

Replace parts if necessary.

5. Reassemble in the reverse order.

280 / 420 575

- English -

Storage/Winterization

● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are

to be expected.

● Thoroughly clean the unit, check for damage.

● Ensure that the storage place is inaccessible to children.

Wear parts

The impeller unit is a wear part and is excluded from the warranty.

Disposal

Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further

information about the recycling of this product can be obtained from your local municipal authority.

Issue Cause Solution

The unit is not

performing its

suction function

Power supply not connected Connect pump power supply, check the supply lines to make sure

the voltage is correct

Impeller blocked, shaft broken Remove the inlet screen and/or pump cover, and impeller

housing to expose the impeller. Turn the impeller to ensure that it

is not broken or jammed by debris. Also check to make sure that

the ceramic shaft or bearings are not broken.

Pump is not completely

submerged

Completely submerge pump in the water

Insufcient ow Flow control closed too far Adjust ow control

Screen clogged Clean

Tubing blocked Clean or replace tubing

Tubing kinked Eliminate kink, replace tubing if it is damaged

Excessive ow loss in the

tubing due to friction

Reduce tubing length to reduce frictional loss

Pump is not completely submerged Completely submerge pump in the water

Pump overload. The ow is

automatically stopped to protect

the pump.

○ Clean the pump housing and impeller assembly

○ Reduce the ambient temperature (e.g. ensure that the specied

water temperature is adhered to, avoid direct sunlight)

Impeller worn Replace impeller assembly

Unit switches

off after a short

running period

Excessive soiled water Clean impeller housing, bearing and impeller assembly

Impeller blocked, shaft broken Remove the inlet screen and/or pump cover, and impeller

housing to expose the impeller. Turn the impeller to ensure that it

is not broken or jammed by debris. Also check to make sure that

the ceramic shaft or bearings are not broken.

Water temperature too high Maximum water temperature: +95° F (+35 °C)

Troubleshooting

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com 7

Model Model No. Rated

voltage

Power

consumption Max. ow rate Max. head

height

cord

length

connection

for hoses Dimensions

280 45418

120V /

60 Hz

0.45 A / 27 W 280 GPH 7.8 ft.

16 ft. 3/4″

5.82 x 4 x 6.41 in.

420 45419 0.8 A / 42 W 420 GPH 11.5 ft.

575 45420 1.2 A / 68 W 575 GPH 13.5 ft. 5.82 x 4 x 6.5 in.

Pond Pump

Pos.

Pond Pump

280 420

1Pump screen Pump screen

2Impeller housing Impeller housing

3Shaft support Shaft support

4Shaft Shaft

5Impeller assembly Impeller assembly

6 O-ring O-ring

7 3/4 in. ID tubing adapter with ow control

2 3

- English -

Pos.

Pond Pump

575

1Pump screen

2Impeller housing

3Impeller assembly

4 O-ring

3/4 in. ID tubing

adapter with ow

control

RAPPEL

APPELEZ LE 1-866-627-3435

AVANT DE RETOURNER AU MAGASIN.

- Français -

Questions, problèmes, pièces manquantes ?

Avant de retourner chez votre détaillant, appelez au 1 866 627-3435, entre 8 h et 18 h, heure de l’Est, ou encore envoyez-nous un

courriel à l’adresse customercare@oase-livingwater.com. Vous pouvez aussi consulter notre site web au www.oase-livingwater.com

Pièce Description Quant.

APompe 1

BAdaptateur pour tuyau de 19 mm

dotée d’un contrôle de débit 1

RAPPEL

APPELEZ LE 1-866-627-3435

AVANT DE RETOURNER AU MAGASIN.

Informations sur le mode d’emploi

Bienvenue à OASE Living Water. L’achat de votre pompe de bassin 280 / 420 / 575 constitue un excellent choix. Avant

d’utiliser la pompe, lisez les instructions attentivement et familiarisez-vous parfaitement avec l’appareil. Assurez-vous que

tout travail effectué sur cet appareil et toute utilisation est conforme aux instructions qui suivent. Suivez ces instructions à

la lettre an de vous assurer d’une manutention de l’appareil adéquate et sans risque. Conservez ces instructions dans un

endroit sûr et remettez-les au nouveau propriétaire si vous transmettez l’appareil.

- Français -

PICTOGRAMMES DE PRÉCAUTIONS ET MISES EN GARDE

Pictogrammes utilisés dans ces instructions

Les pictogrammes utilisés dans ce manuel d’utilisation ont les signications suivantes :

Risque de blessures aux personnes en raison de la tension électrique dangereuse.

Ce pictogramme indique un danger imminent pouvant entraîner la mort ou des blessures graves si les mesures

appropriées ne sont pas prises.

Situation dangereuse pour les personnes en raison d’un danger d’ordre général.

Ce pictogramme indique un danger imminent pouvant entraîner la mort ou des blessures graves si les mesures

appropriées ne sont pas prises.

Important ! L’appareil est doté d’un aimant permanent. Le champ magnétique peut inuencer le fonctionnement des

stimulateurs cardiaques.

Renseignements importants pour un bon fonctionnement.

Utilisation prévue

Pompe de bassin 280 / 420 et 575, désignées ci-après comme « l’appareil », peuvent être utilisées seulement comme

indiqué dans les points suivants :

• Pour la circulation et le pompage de l’eau d’un bassin normal, pour les ltres et les pièces d’eau additionnelles.

• Fonctionnement en respect avec les données techniques.

Les restrictions suivantes s’appliquent à l’appareil :

• Ne pas utiliser dans une piscine.

• Attention - Cette pompe a été évaluée pour une utilisation avec de l’eau seulement.

• Ne jamais faire fonctionner l’appareil sans eau.

• Ne pas utiliser à des ns commerciales ou industrielles.

• Ne pas utiliser avec des produits chimiques, des aliments ou des substances facilement inammables ou explosives.

• Ne pas relier au système d’approvisionnement en eau domestique.

• Ne pas dépasser le voltage indiqué sur la pompe.

• Avant l’installation ou l’entretien, inspectez le cordon d’alimentation pour vous assurer qu’il n’est pas endommagé.

• Ne pas retirer la broche de terre de la che du cordon d’alimentation.

Utilisation non conforme

Cet appareil peut être dangereux et causer des dommages s’il n’est pas utilisé conformément aux instructions qui suivent.

Toute utilisation non conforme à ces instructions ou toute modication à l’appareil annulera la garantie.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Oase Teichpumpe Handbücher

Oase

Oase Aquamax 2000 Bedienungsanleitung

Oase

Oase AquaMax Eco Twin 20000 Bedienungsanleitung

Oase

Oase AquaMax Eco Premium 8000 Bedienungsanleitung

Oase

Oase Filtoclear Bedienungsanleitung

Oase

Oase AquaAir Eco 250 Leitfaden

Oase

Oase Aquarius Fountain Set Classic 750 Bedienungsanleitung

Oase

Oase FP Series Bedienungsanleitung

Oase

Oase Aquarius Universal 600 Bedienungsanleitung

Oase

Oase AquaOxy 450 Bedienungsanleitung

Oase

Oase 57384 Bedienungsanleitung

Oase

Oase AquaMax Eco Premium 6000 12 V Bedienungsanleitung

Oase

Oase SwimSkim 25 Bedienungsanleitung

Oase

Oase AquaMax Eco Gravity 10000 Bedienungsanleitung

Oase

Oase WATER STARLET Bedienungsanleitung

Oase

Oase AquaOxy 4800 Bedienungsanleitung

Oase

Oase Profimax 20.000 Bedienungsanleitung

Oase

Oase AquaMax Eco Expert 26000 Bedienungsanleitung

Oase

Oase AquaMax Eco Classic Series Bedienungsanleitung

Oase

Oase AquaMax Eco Titanium 31000 Bedienungsanleitung

Oase

Oase FP 2500 Bedienungsanleitung

Oase

Oase AquaOxy 400 Bedienungsanleitung

Oase

Oase Aquamax Dry 6000 Bedienungsanleitung

Oase

Oase AquaMax Eco Classic 2500 Bedienungsanleitung

Oase

Oase AquaMax Eco Classic Series Bedienungsanleitung

Beliebte Teichpumpe Handbücher anderer Marken

Profi-pumpe

Profi-pumpe Rügen Bedienungsanleitung

HEISSNER

HEISSNER F540-00 Bedienungsanleitung

1A Profi Handels

1A Profi Handels OASIS 501R-1 Bedienungsanleitung

Biotop Garden

Biotop Garden D0060 Bedienungsanleitung

Profi-pumpe

Profi-pumpe JR-800LV Bedienungsanleitung

Sealey

Sealey WPP1100 Bedienungsanleitung

Pontec

Pontec PondoMax Eco 1500 Bedienungsanleitung

TIP

TIP WP 500-10 R Bedienungsanleitung

esotec

esotec Siena LED Bedienungsanleitung

Danner

Danner Pondmaster 1250 Bedienungsanleitung

Pond Boss

Pond Boss 52354 Bedienungsanleitung

TeichTip

TeichTip Sunsun Bio Pond Filter Set Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 5500 Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Aquaforce Series Bedienungsanleitung

HEISSNER

HEISSNER SPF 150-00 Bedienungsanleitung

AquaScape

AquaScape AQUAFORCE 4000-8000 Gebrauchsanweisung

Messner

Messner system-X 1501 Bedienungsanleitung

WilTec

WilTec TeichTip SunSun SuperEco CTM Series Bedienungsanleitung