iPhone & iPod touch are trademarks of Apple Computer, Inc.
Android is a trademark of Google, Inc.
X-Lite is a trademark of Counterpath Corporation
OBi, OBiTALK are trademarks of Obihai Technology, Inc.
* * *
OBi Device Manager Web Page Access:
1. From a phone attached to the OBi, dial to access
the OBi config attendant.
2. Choose “1” to hear the IP address of the OBi.
3. Enter the OBi IP address in a local PC browser web
site address window:
4. When prompted, enter “4. When prompted, enter “admin” for username &
“admin” for password.
How to Perform a Factory Reset:
1. Power on the OBi device.
2. Locate the Factory Reset button access hole on the bottom of
the OBi. It is a circular hole (a little larger than the others) just
above and to the left of the Model ID on the product label.
3. Using a paper clip or similar instrument, depress the button
inside the hole for 15 seconds. inside the hole for 15 seconds.
4. The Power LED will flash red. This indicates you may release
the button and the OBi will now be reset to its factory defaults.
Note: A service provider may restrict some settings from being reset to a factory default.
This equipment has been tested & found to comply with a Class B digital device in accordance with the specifications of the FCC rules.
This product bares the CE marking indicating compliance with the 89/336/EEC directive. This device has been granted a registration
number by the FCC under Part 68 Rules & Regulations for direct connection to telephone lines.
Important: Only an analog telephone or fax machine should be connected to the OBi PHONE port. Do not connect a cable from
the PHONE port to a telephone jack powered by the phone company. Doing so may cause damage to the OBi electronics. On the
bottom of the device is a label that contains among other information, the FCC Registration Number. If requested, this information
should be provided to the telephone company. The USOC jack for this equipment is RJ11C.
For indoor use only. Read installation instructions before connecting to a power source. The electric plug & socket must be acces-
sible at all times as this is the main method to disconnect power from the device. Shock Hazard: Do not operate near water or similar
fluid. Do not work with this device during periods of lightning activity. Do not touch wires at end of the phone cables or inside sockets.
Do Not Use for Emergency Calls or Contacting Emergency Services
This equipment is not intended to be used to call emergency services like 911, 112, 999, 000.
Compliance & Safety Information
Go to www.obihai.com and Log in
to optimize your OBi set-up.
Configure Services & Users
Landline & VoIP Services
Circles of Trust and Trusted Caller IDs
www.obihai.com
Requires installation and configuration
of a soft phone like Counterpath X-Lite
OBiAPP for PC
Download Obihai
Software Products
OBiON for iPhone & Android
The
I
nternet
Sign Up & Log In at the Obihai Web Site
To bridge a call from one OBi endpoint to another, call the number associated with the
OBi, allow the Attendant to answer, then follow instructions & enter * * 9 + OBi No. to call.
To Use a VoIP service from a remote phone, call the number associated with the OBi,
allow the Attendant to answer, then follow instructions & enter destination number to call.
To use a VoIP service from an attached phone dial destination number to call.
Requires VoIP Service Subscription
Requires VoIP Service Subscription
After you have your services set up via the Obihai web portal, you can use the OBi to
bridge services like calling from your mobile phone to the OBi and then connecting to
your destination via a low cost service or the no-cost OBiTALK network.
Using OBi to Bridge Other Services
Visit Our Web Site at www.obihai.com
At the Support Section of the Web Site You Will Find:
Downloads & Documentation - OBi Software & Documentation
Support Forum - Got a Question Or Comment? Post It at the Forum
Frequently Asked Questions - Knowledge Is Power
Tutorials, Tips & Wizards - Learn About & Get the Most from Your OBi
How to Learn More & Get Support
222 222 222
OBiTALK Test No:
* *
Dial
9
followed by:
At any time, you can make a test call to the OBi Number below:
MaryJohn
To call Mary, John dials:
9 followed by
123 456 789
**
**
This OBi is ready to make FREE calls to other OBi endpoints using the OBiTALK network.
On the bottom of your unit, you will see a 9-digit OBi Number. This is your OBi Number.
Give this number to your friends, family and colleagues so they can call you from their OBi
device or using an OBi software application for PCs or mobile phones.
To use the OBiTALK network, all you have to do is install your OBi, pick up the phone and
then call your friends by dialing 9 and their nine-digit OBi Number.
Using OBiTALK to Call Other OBi Endpoints
