Oce OP1030 Bedienungsanleitung
1.1.1.
Océ OP1030/1040/1050 Scan System Functions
Operations Guide
Océ
Operations Guide
English version
Operation Guide <Functions Edition>
Click on the button to jump to the desired section.
Sending Scanned Image Data to Your Computer
Using TWAIN Capabilities
Sending Scanned Image Data by Email
Using the Scanner Function
Adding File Information to Scanned Image Data
i
Sending Scanned Image Data to Your Computer (Scan to PC)
Create a destination folder in your computer and you can have scanned image data sent directly to that
folder. The flowchart below shows a simple illustration of the steps required up to transmission of the data to
the computer.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Making basic settings
Creating destination folders
Sending scanned image data
Use the scanner to designate a destination and
have scanned image data sent directly to that
location.
See page
3-26
Settings and registra-
tion using Address
Editor
See page
3-71
Settings and registra-
tion using Address
Book
See page
2-1
Settings and registra-
tion using an Internet
Web browser
In order to use the Scan to PC function it is necessary to utilize the included utilities and make network
settings and register such information as the sender and destination addresses.
See page
3-4
Scanner File Utility
* Network settings as well
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.
ii
Sending Scanned Image Data by Email (Send E-mail)
Have scanned image data sent directly by email to a registered email address. The flowchart below shows a
simple illustration of the steps required up to transmission of the email message.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Making basic settings
Sending scanned image data
Use the scanner to designate a destination and
have scanned image data sent directly to that
location.
See page
3-26
Settings and registra-
tion using Address
Editor
See page
3-71
Settings and registra-
tion using Address
Book
See page
2-1
Settings and registra-
tion using an Internet
Web browser
In order to use the Send E-mail function it is necessary to utilize the included utilities and make network
settings and register such information as the sender and destination addresses.
* Network settings as well
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.
iii
Use scanner image data in TWAIN-compatible applications. The flowchart below shows a simple illustration
of the steps required up to scanning of the data using the TWAIN source.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Using TWAIN Capabilities (TWAIN)
Making basic settings
In order to use the TWAIN source it is necessary
to make certain scanner-related settings.
Starting the scanning operation
Use the TWAIN source to initiate the scanning
operation.
See page
3-103
Settings related to
the TWAIN source
See page
3-108
Scanning with
the TWAIN source
iv
Adding File Information to Scanned Image Data
You can make settings related to the addition of file information (keywords) which helps you search your
computer for specific scanned images, or have that information saved as a csv file along with the scanned
image data. By including such file information along with your scanned image data, it will be an easy task to
locate any specific file among any number of others by simply searching for the added information.
* This function is not available by KM-C830/830D.
Making Basic Settings
Designating the Destination
Adding File Information to Scanned Image Data
The scanner s operation panel is used to designate the
destination where the scanned data will be saved and
send that data.
See page
3-127
Settings and registra-
tion using the DB
Assistant software
See page
3-4
Settings using the
Scanner File Utility
See page
2-1
Settings using
a Web browser
If you intend to use the Database Connection function, it will be necessary to use the DB Assistant software to
register various settings, certain information related to the computer it is installed on, as well as other information.
Then, in order to connect the DB Assistant with the scanner, you will need to use a Web browser or the scanner s
operation panel to enter the IP address or host name of the computer the DB Assistant is installed on.
* You can also use the
scanner s operation panel to
make network settings,
designate the location to
save the data, and register
your (the sender s) name.
* When you add file
information (keywords) and
then search for the
corresponding information
under that same item, use
PaperPort, the software that
is bundled with this product.
v
• Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corpora-
tion of America and other countries.
• Windows Me and Windows XP is a trademark of Microsoft Corporation.
• Ethernet is a registered trademark of Xerox Corporation.
• IBM and IBM PC/AT are trademarks of International Business Machines Corporation of America.
• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
• PaperPort is a registered trademark of ScanSoft Inc. of America and other countries.
All other company and product names contained in this Instruction Handbook are trademarks or registered
trademarks of their respective companies. The designations ™ and ® will not be used in this handbook.
Trademark Information
vi
Contents
Sending Scanned Image Data to Your Computer (Scan to PC) .................................. i
Sending Scanned Image Data by Email (Send E-mail)............................................... ii
Using TWAIN Capabilities (TWAIN)............................................................................. iii
Adding File Information to Scanned Image Data......................................................... iv
Trademark Information ................................................................................................ v
Contents ...................................................................................................................... vi
Section 1 What is the Network Scanning System? ..................................................... 1-1
1-1 Outline .................................................................................................................. 1-2
1-2 Using the Scanner Utilities CD-ROM ................................................................... 1-3
1-2-1 Contents of the CD-ROM ........................................................................ 1-4
(1) Scanner Utilities.............................................................................. 1-5
(2) TWAIN Source ................................................................................ 1-6
(3) Configuration Tool........................................................................... 1-6
(4) Documents ..................................................................................... 1-6
(5) Select Language............................................................................. 1-6
1-2-2 On-Line Manual ...................................................................................... 1-7
vii
1-3 Using the Scanner Function ................................................................................. 1-8
1-3-1 Basic Settings ......................................................................................... 1-13
(1) Original size selection (“Select original size”) ................................. 1-13
(2) Image transmission size selection (“Select sending size”) ............. 1-14
(3) Scanning resolution selection (“Scanning resolution”) ................... 1-14
(4) Original orientation selection (“Orig. set direction”) ........................ 1-15
(5) Image file format selection (“File type”) .......................................... 1-15
1-3-2 Image Quality Settings ............................................................................ 1-16
(1) Scanning density adjustment (“Scanning density”) ........................ 1-16
(2) Image Quality selection (“Original image quality”) .......................... 1-16
(3) JPEG quality selection (“JPEG level set”) ...................................... 1-16
(4) Color mode selection (“Color mode”) ............................................. 1-17
(5) B & W mode selection (“B & W setting”) ........................................ 1-17
1-3-3 Other settings.......................................................................................... 1-18
(1) Original type mode (“Original type”) ............................................... 1-18
(2) Border erase mode (“Erase”).......................................................... 1-19
(3) Output by page function (“One page per file”) ................................ 1-19
(4) Continuous scanning function (“Continuous scanning”) ................. 1-20
(5) Filing mode (“Auto selection”) ......................................................... 1-20
(6) Default file name (“File name input”) .............................................. 1-21
(7) Full scanning (“Border erase mode”) .............................................. 1-22
(8) Centering (“Centering/Image shift mode”) ...................................... 1-23
1-3-4 “Uncompress scanning” setting .............................................................. 1-24
1-3-5 “Continuous sending” setting .................................................................. 1-26
1-3-6 “Priority "Input file name"” setting............................................................ 1-29
1-3-7 “Selec. of senders (users)” setting .......................................................... 1-33
viii
Section 2 Making Settings from a Web Browser ......................................................... 2-1
2-1 WebPage Functions ............................................................................................. 2-2
2-2 Index of Objectives ............................................................................................... 2-3
2-3 Cautions ............................................................................................................... 2-4
2-3-1 If you are having trouble connecting to the scanner
from a Web browser… ............................................................................ 2-4
2-3-2 If a message appears which informs you that you can not connect,
such as “Could not open Internet Site XXXXX”... ................................... 2-4
2-3-3 If “Cannot Find Page” appears… ............................................................ 2-4
2-3-4 If a message appears which informs you that access is not allowed,
such as “xxx Access is not allowed”........................................................ 2-4
2-4 Using the WebPage Functions Interface .............................................................. 2-5
2-5 The Home Page ................................................................................................... 2-7
2-5-1 The Top Frame........................................................................................ 2-8
2-5-2 The Menu Frame .................................................................................... 2-9
2-5-3 The Main Frame...................................................................................... 2-10
2-6 System Setting ..................................................................................................... 2-11
2-6-1 Setting Conditions ................................................................................... 2-11
2-6-2 System Basic Setting .............................................................................. 2-12
2-6-3 Scanner Setting ...................................................................................... 2-21
2-6-4 Sender List .............................................................................................. 2-23
Andere Handbücher für OP1030
5
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Oce Multifunktionsdrucker Handbücher
Oce
Oce im4530 Bedienungsanleitung
Oce
Oce 3122 Bedienungsanleitung
Oce
Oce VL3200x Bedienungsanleitung
Oce
Oce cm3522 Bedienungsanleitung
Oce
Oce CS230 Phase 3 Bedienungsanleitung
Oce
Oce cx2100 Bedienungsanleitung
Oce
Oce VarioLink 5022 Bedienungsanleitung
Oce
Oce cm2510 Installations- und Betriebsanleitung
Oce
Oce OP1030 Bedienungsanleitung
Oce
Oce im2330 Bedienungsanleitung
Oce
Oce Color System 200 Bedienungsanleitung
Oce
Oce VL3622 Bedienungsanleitung
Oce
Oce CS655 Pro Gebrauchs- und Pflegehandbuch
Oce
Oce cm5520 Bedienungsanleitung
Oce
Oce VarioLink 2221 Bedienungsanleitung
Oce
Oce VarioLink 2222c Bedienungsanleitung
Oce
Oce im2330 Bedienungsanleitung
Oce
Oce cm4521 Bedienungsanleitung
Oce
Oce VarioPrint 1105 Bedienungsanleitung
Oce
Oce im5530 Programmierhandbuch
Beliebte Multifunktionsdrucker Handbücher anderer Marken
Triumph Adler
Triumph Adler DC 2016 Handbuch
Epson
Epson WorkForce WF-2510 Benutzerhandbuch
Epson
Epson Stylus Scan 2000 Installations- und Betriebshandbuch
Epson
Epson PictureMate Snap PM 240 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C35 Bedienungsanleitung
Brother
Brother MFC-J430w Bedienungsanleitung
