Oce BLM 500 Bedienungsanleitung
Océ BLM500
Océ User manual
Bookletmaker Océ BLM500
Edition 08-2007 US
Océ-Technologies B.V.
Copyright
©2007, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or
transmitted in any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose.
Further, Océ reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation to notify any person of such
revision or changes.
3
Table of Contents
Table of Contents
Chapter 1
Introduction to the Océ BLM500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description of the Océ BLM500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Right Hand Side of the Océ BLM500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
The Rear Panel of the Océ BLM500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2
How to run the Océ BLM500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turn On the Océ BLM500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Enter the Job Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Stacker adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjust the Position of the Gate in the Gathering Area . . . . . . . . . . . . . . . 18
Run the Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 3
The User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
The Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
The Job Mimic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
The BASIC Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
The LOAD & SAVE Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The ADVANCED Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
The CONFIGURE Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
The MENU Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Chapter 4
Standard Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Load and Save the Job Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Open the Connecting Bridge Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Open the Folder Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Lift and Lower the Clincher Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Open the Gathering Area Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Lift the Océ BLM500 Main Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Empty the Trim Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Open the Stitch Wire Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Adjust the Stacker Collection Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Adjust the Gate in the Gathering Area . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Operate the Océ BLM500 offline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4
Table of Contents
Chapter 5
Error Conditions, Problems and Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Clear a Printer Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Clear a Océ BLM500 Error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
General Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Book Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Clear Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Stitch Head Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Clear a Stitch Wire Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Clear a Stitch Head Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Calibrate the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Change the Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Manually park the Shuttle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Chapter 6
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
About Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Océ BLM500 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Clean the Static Elimination Bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Clean the Former Roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Clean the Polyurethane Strips in the Form Clamp. . . . . . . . . . . . . . . . . . 83
Lubricate the Stitch Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Lubricate the Wire-feed Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Install New Stitch Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Appendix A
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Appendix B
Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Appendix C
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Reader's comment sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Addresses of local Océ organisations . . . . . . . . . . . . . . . . . . . . . . . . . . 104
5
Chapter 1
Introduction to the Océ
BLM500
6 Chapter 1 Introduction to the Océ BLM500
Introduction
Introduction
Introduction
Thank you for choosing the Océ BLM500.
Your Manual
The Océ BLM500 User Manual describes how to do these tasks:
■Operate the Océ BLM500
■Find and correct error conditions
■Do normal maintenance tasks
Operator training is given when the Océ BLM500 is installed. To make sure you use
your Océ BLM500 correctly, read your manual.
The Océ BLM500 User Manual does not describe the operation of the printer. If
needed, refer to your printer user manual.
Safety Information
Safety information is included in the separate 'Safety Information Manual'. Read the
safety information before you use your Océ BLM500.
Caution: A CAUTION message tells you that a procedure or operation can
be dangerous. To prevent injury, you must follow the instructions.
Attention: An ATTENTION message tells you that a procedure or operation can
damage the machine or the product. To prevent damage, you must follow the
instructions.
Installation
Your Océ BLM500 must be installed by a service engineer. Special knowledge is
needed to install the machine.
Attention:
Only connect the machine to a mains power supply of the correct voltage with a good
earth-connection. The correct machine-voltage is shown on the label at the mains
power supply input on the rear of the machine. If the machine is connected to the
wrong supply, the warranty is canceled.
7
Introduction
How to Get Help
If you have any questions or problems, refer to the problem solving section in this
manual (see chapter 'Error Conditions, Problems and Solutions”'). Contact your Océ
BLM500 supplier for further help.
8 Chapter 1 Introduction to the Océ BLM500
Description of the Océ BLM500
Description of the Océ BLM500
Introduction
The Océ BLM500 operates online with digital printers to process sets of printed
pages into stitched books. The main parts are shown below.
Illustration
[1]
[1] Operator Side of the Océ BLM500
Component - function table
[1]
A
B
C
D
[1] Operator Side of the Océ BLM500
Component Function
A The connecting
bridge
The connecting bridge moves the printed sheets from
the printer to the Océ BLM500. If needed, the sheets
are rotated into the correct direction. Rotation lets the
printer operate at optimum print speed. Adjustment
for the size of the paper and sheet rotation is
automatic, according to the settings entered on the
touch screen.
B The User Interface The user interface has a color touch screen, a start
button and a stop button .
C The Océ BLM500 The Océ BLM500 stitches, folds, spine-forms and
trims the sheets to make a finished book.
D The stacker The stacker collects the finished books.
9
Right Hand Side of the Océ BLM500
Right Hand Side of the Océ BLM500
Illustration
[2]
[2] Right hand side of the Océ BLM500
Component - function table
[2]
A
B
[2] Right hand side of the Océ BLM500
Component Function
AThestitchwire
cabinet
The stitch wire cabinet holds the spool of stitch wire.
B Trim Bin The trim bin collects the paper that is trimmed from
the edge of the book.
10 Chapter 1 Introduction to the Océ BLM500
The Rear Panel of the Océ BLM500
The Rear Panel of the Océ BLM500
Illustration
[3]
[3] The Rear Panel of the Océ BLM500
Component - function table
[3]
B
C
E
D
F
A
[3] The Rear Panel of the Océ BLM500
Component Function
A Rating and serial
label
The rating label displays the type of machine, serial
number, power use and fuse information.
B Mains power
ON/OFF switch
The mains power ON/OFF switch turns the Océ
BLM500 ON or OFF. When you turn OFF the Océ
BLM500, the current settings are stored.
C Voltage advisory
label
The voltage advisory label tells the installer to refer
to the installation instructions before the Océ
BLM500 is connected to mains power. The Océ
BLM500 can be adjusted for one of several
different input voltages.
D Fuses The fuses make sure the operator and the machine
are protected if there is an electrical problem or
short circuit.
E Voltage label The voltage label is fitted to the Océ BLM500
during the installation procedure. The voltage label
displays the selected voltage.
F Mains power input
connector
The mains power input connector is used to
connect the Océ BLM500 to mains electrical
power.
Andere Handbücher für BLM 500
1
Inhaltsverzeichnis
Andere Oce Broschürenmacher Handbücher
