OCEE DESIGN DEN.Cube Bedienungsanleitung

Assembly Instructions

DEN.Cube

2 Person

1400w & 1600w odule

SASS-0070 A

850w Side Panel

A x2 1400w Den.Cube = 1050w Back Panel

1600w Den.Cube = 1250w Back Panel

2-Way Junction (90°)

Bottom Connector Link

C x2B x2

Z x10

1400w Den.Cube = 1300w Worksurface

1600w Den.Cube = 1500w Worksurface

G x2 6x20 Button Head Bolts

Large Worksurface Fixing Bracket Small Worksurface Fixing Bracket

W x44

X x6 Y x6

Return Worksurface

H x2

Worksurface Components

Shell Components

650w Side Panel

E x2

Junction Connector Plate

S x2

1250w Back Panel

D x1

3-Way Junction (90°)

F x2

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

Tools

4mm Allen Key/Phillips Screwdriver Cushioned allet 13mm Spanner

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

&

Z'HQ&XEH Z%DFN3DQHO

Z'HQ&XEH Z%DFN3DQHO

$

Z6LGH3DQHO

'

Z%DFN3DQHO

(

Z6LGH3DQHO

&

Z'HQ&XEH Z%DFN3DQHO

Z'HQ&XEH Z%DFN3DQHO

(

Z6LGH3DQHO

$

Z6LGH3DQHO

=

%RWWRP&RQQHFWRU

/LQN[

%

:D\-XQFWLRQ



;

/DUJH:RUNVXUIDFH

)L[LQJ%UDFNHW

6PDOO:RUNVXUIDFH

)L[LQJ%UDFNHW

%

:D\-XQFWLRQ



)

:D\-XQFWLRQ



*

Z'HQ&XEH Z:RUNVXUIDFH

Z'HQ&XEH Z:RUNVXUIDFH

-XQFWLRQ&RQQHFWRU

3ODWH

+

5HWXUQ

:RUNVXUIDFH

)

:D\-XQFWLRQ



;

*

Z'HQ&XEH Z:RUNVXUIDFH

Z'HQ&XEH Z:RUNVXUIDFH

+

5HWXUQ

:RUNVXUIDFH

%

%

)

$

(

)

&

'

(

$

*

*

+

&

Assembled Configuration Illustration (for Reference)

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

Insert the modular screws in the 850w side panel (A-1) into the keyholes in the 2-way

junction (B-1), making sure that all of the screws have engaged into the keyholes.

After making sure all of the screws are engaged in the keyholes, tap the top of the

850w side panel (A-1) with a cushioned mallet to fully engage. Tie the 850w side

panel (A-1) and the 2-way junction (B-1) together using a bottom connector link (Z).

Insert this over one of the levellers (between the nut and the bottom of the

panel/junction) in the hooked slot and pivot around to insert the other leveller into the

straight slot. Fully tighten both nuts using a 13mm spanner to trap the connector.

Attach the 1050w/1250w (module dependent) back panel (C-1) to the 2-way junction

(B-1) as shown above (see step 1 for method).

Tap the top of the 1050w/1250w (module dependent) back panel (C-1) with a

cushioned mallet to fully engage.

Tie the 1050w/1250w (module dependent) back panel (C-1) to the 2-way junction

(B-1) using a bottom connector link (Z) as shown above (see step 2 for method).

Panel

Connector

8 nut

Leveller

Sub-Assembly A

Panel

Connector

8 nut

Leveller

Junction

Bottom Connector Link

B-1

2-Way Junction (90°) A-1

850w Side Panel

C-1

1400w Den.Cube = 1050w Back Panel

1600w Den.Cube = 1250w Back Panel

Bottom Connector Link

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

Attach the 1050w/1250w (module dependent) back panel (C-1) to the 3-way junction

(F-1) as shown above (see step 1 for method).

Tap the top of the 1050w/1250w (module dependent) back panel (C-1) with a cushioned

mallet to fully engage.Tie the 1050w/1250w (module dependent) back panel (C-1) to the

3-way junction (F-1) using a bottom connector link (Z) (see step 2 for method).

You have now fully assembled sub-assembly A, safely secure this sub-assembly until

step 13 where it shall be used in the main assembly of the cube.

Attach the 650w side panel (E-1) to the 3-way junction (F-2) as shown above (see

step 1 for method).

Tap the top of the 650w side panel (E-1) with a cushioned mallet to fully engage.

Tie the 650w side panel (E-1) to the 3-way junction (F-2) using a bottom connector

link (Z) (see step 2 for method).

Sub-Assembly B

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

F-1

3-Way Junction (90°) Z

Bottom Connector Link

F-2

3-Way Junction (90°)

Bottom Connector Link

E-1

650w Side Panel

Attach the 1250w back panel (D-1) to the 3-way junction (F-2) as shown above (see

step 1 for method).

10.

Tap the top of the 1250w back panel (D-1) with a cushioned mallet to fully engage.

Tie the 1250w back panel (D-1) to the 3-way junction (F-2) using a bottom connector

link (Z) (see step 2 for method).

11.

Attach the 650w side panel (E-2) to the 3-way junction (F-2) as shown above (see

step 1 for method).

12.

Tap the top of the 650w side panel (E-2) with a cushioned mallet to fully engage.

Tie the 650w side panel (E-2) to the 3-way junction (F-2) using a bottom connector

link (Z) (see step 2 for method).

You have now fully assembled sub-assembly B, safely secure this sub-assembly until

step 13 where it shall be used in the main assembly of the cube.

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

D-1

1250w Back Panel

Bottom Connector Link

E-2

650w Side Panel

13.

Attach the 1250w back panel (D-2) of sub-assembly B to the 3-way junction (F-1) of

sub-assembly A (see step 1 for method).

14.

Tap the top of the 1250w back panel (D-2) of sub-assembly B with a cushioned mallet to

fully engage. Tie the 1250w back panel (D-2) of sub-assembly B to the 3-way junction

(F-1) of sub-assembly A using a bottom connector link (Z) (see step 2 for method).

Safely secure this sub-assembly of panels until step 19 where it shall be used in the

main assembly of the cube.

15.

Attach the 850w side panel (A-2) to the 2-way junction (B-2) as shown above (see

step 1 for method).

16.

Tap the top of the 850w side panel (A-2) with a cushioned mallet to fully engage. Tie

the 850w side panel (A-2) to the 2-way junction (B-2) using a bottom connector link

(Z) (see step 2 for method).

Sub-assembly B

Sub-assembly A

Sub-Assembly C

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

Bottom Connector Link

A-2

850w Side Panel

Bottom Connector Link

B-2

2-Way Junction (90°)

17.

Attach the 1050w/1250w (module dependent) back panel (C-2) to the 2-way junction

(B-2) as shown above (see step 1 for method).

18.

Tap the top of the 1050w/1250w (module dependent) back panel (C-2) with a cushioned

mallet to fully engage. Tie the 1050w/1250w (module dependent) back panel (C-2) to the

2-way junction (B-2) using a bottom connector link (Z) as shown above (see step 2 for

method).

You have now fully assembled sub-assembly C, safely secure this sub-assembly until step

19 where it shall be used in the main assembly of the cube.

19.

Attach the 1050w/1250w (module dependent) back panel (C-2) of sub-assembly C to

the 3-way junction (F-1) of the panel assembly from step 14 (see step 1 for method).

20.

Tap the top of the 1050w/1250w (module dependent) back panel (C-2) with a

cushioned mallet to fully engage.

Tie the 1050w/1250w (module dependent) back panel (C-2) of sub-assembly C to the

3-way junction (F-1) using a bottom connector link (Z) (see step 2 for method).

Sub-assembly C

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

C-2

1400w Den.Cube = 1050w Back Panel

1600w Den.Cube = 1250w Back Panel

Bottom Connector Link

Bottom Connector

Link

200

250

M6 x 20mm Button

Head Bolts

(x9)

21.

Attach the worksurface fixing brackets (X&Y) to the Den structure using 1x 6x20mm socket button head machine screw (W) per small bracket (Y) and 2x 6x20mm socket button

head machine screws (W) per large bracket (X), in the positions shown above. Use the top holes/slots for a 730mm worksurface height and the bottom for a 750mm worksurface

height. (see above)

When fixing the small brackets (Y) to the structure, make sure to pass the machine screws (W) through the 7mm hole. When fixing the Large brackets (X) to the structure, make sure

to pass the machine screws (W) through the horizontal slot.

22.

Lower the worksurfaces (G&H) onto the brackets (X&Y) attached to the structure in

steps 13. Attach the worksurface fixing brackets (X&Y) to the underside of the

worksurfaces (G&H) using 1x 6x20mm socket button head machine screw (W) per

small bracket (Y) and 2x 6x20mm socket button head machine screws (W) per large

bracket (X).

23.

750mm Worksurface

height

730mm Worksurface

height FRONT

BACK

FRONT

BACK

FRONT

BACK

4mm Allen Key

Small Worksurface

Fixing Bracket

Large Worksurface

Fixing Bracket

6x20 Button

Head Bolts

DEN.Cube Assembly Instructions DWG No: SASS-0070

Revision: A (02/11/15)

Drawn by: CE

Drawn date: 08/09/15

To secure the 2 worksurfaces (G&H), attach the junction connector plate (S), using

4x 6x20mm socket button head machine screws (W), in the position shown above.

Repeat steps 21 - 23 for both units.

H -1

Return

Worksurface

G-1

1400w Den.Cube = 1300w Worksurface

1600w Den.Cube = 1500w Worksurface

4mm Allen Key

6x20 Button

Head Bolts

Small Worksurface

Fixing Bracket

Large Worksurface

Fixing Bracket Underside

View

Andere Handbücher für DEN.Cube

Andere OCEE DESIGN Büroausstattung Handbücher

OCEE DESIGN

OCEE DESIGN DEN SASS-0082 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN Den Seat SASS-0079 A Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN SASS-0100 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN.Panel Triple SASS-0068 A Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN SASS-0096 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN.Booth SASS-0040 B Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN.Curve 2 Person Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN SASS-0090 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN 675d Module Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN.Curve Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN SASS-0102 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN DEN SASS-0081 Bedienungsanleitung

Beliebte Büroausstattung Handbücher anderer Marken

silen

silen Space 2 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products LD Series Bedienungsanleitung

SHFL

SHFL DECK MATE BLACKJACK Bedienungsanleitung

DROMEAS

DROMEAS LINE Bedienungsanleitung

Siemens

Siemens HIPATH 2000 Bedienungsanleitung

VITRA

VITRA Stefan Hürlemann Dancing Wall Bedienungsanleitung

BISLEY

BISLEY Glide V2 Bedienungsanleitung

fully

fully Haven Bedienungsanleitung

Plus

Plus NF-20 Bedienungsanleitung

NanaWall

NanaWall CSW75 Bedienungsanleitung

Vivo

Vivo DESK V000C Bedienungsanleitung

ABB

ABB 2TKA002145G1 Bedienungsanleitung

PolyVision

PolyVision Flow Bedienungsanleitung

MBM

MBM FC-10 Bedienungsanleitung

Wiremold

Wiremold V2400 Series Bedienungsanleitung

Vivo

Vivo PP-3-T072D Bedienungsanleitung

BuzziSpace

BuzziSpace BuzziNest Booth Bedienungsanleitung

VIP

VIP Officebox Bedienungsanleitung