Ojmar LOCKR COMBI Bedienungsanleitung

LOCKR COMBI

LOCK 8001

QUICK GUIDE

V.03

WHAT TO DO IF A CODE IS FORGOTTEN

OR LOST.

The 8001 code combination lock can be opened with the

override Master key at anytime if the previously entered code

is forgotten, lost or in an emergency.

Using the Master Key to open the lock it will then also be able

to discover the code used previously.

Note: It is important and advisable that the Master Key is kept

securely and issued and controlled by management only.

1. OPEN DOOR WITH MASTER

KEY.

To open the door using the Master Key, insert into lock cylinder and turn

90º right for right hand doors and 90º left for left hand doors. The door will

now open.

With the door now open, turn the Master key 90º to the locked position

and remove.

2. CODE RECOVERY.

With the door now open and access to the rear of the lock the

combination code stored in the lock can be recovered as follows:

Firmly press and hold the code recovery lever on the inside of the lock.

See diagram bellow:

Whilst maintaining pressure on the lever, turn each code wheel from left to

right until it stops or a click is heard.

See diagram below:

3. CONFIRMING RECOVERED

CODE.

Where the wheels stop will indicate the code stored in the lock and you

should now be able to open and close the lock freely.

If the lock does not open and close freely, repeat step 2. Code recovery.

Lock rear view

Code recovery lever

Mode set screw

Lock front view

Code wheels

Open position Knob turn

position RH Close

position LH

HOW TO CHANGE A CODE AND

SET LOCK MODE.

HOW TO SET DEDICATED MODE

OPERATION.

The lock has two operating modes:

In this mode the same code must be used when opening the lock.

2. Free mode (R):

When set in this mode the lock code can be reset by the user of the locker.

On vacating the locker a new user can set a new code once again.

Note: The lock is supplied from the factory with the code 0-0-0-0 and set in

Free mode.

1. Dedicated mode (F):

When set in this mode the code is xed and the same code will be used to

open the lock each time.

With the lock in the closed position ensure that the mode set screw on the

rear of the lock is turned to position R, see diagram below.

Using the knob turn put the lock into the open position, with the blue arrow

vertical, see diagram below.

Now set required private 4 digit code by turning code wheels. Remember

the code!

Next turn the knob 90º left or right to the locked position according to the

hand of your lock. See diagram below:

Now turn the mode set screw on the rear of the lock to position F.

The lock is now ready to be used in dedicated mode with the same code

being used every time to open the lock.

See diagram below:

Open Position

(Blue Indicator)

Closed Position

(Blue Indicator)

Right Hand Lock Left Hand Lock

Fixed Position

HOW TO SET FREE MODE OPERATION.

In this mode the code can be changed by each repeat user of the

locker.

With the lock in the closed position ensure that the mode set screw on the

rear of the lock is turned to position R. See diagram below:

With the knob turn the lock to the open position. See diagram below:

With the lock still in the open position turn the wheels to the required 4

digit code. Remember the code!

Close the door and turn the lock to the closed position according to the

hand of you lock. See diagram below:

IMPORTANT

- After step 4 for both Free and Dedicated mode, user must “scramble”

code by randomly turning code wheels. This will secure the lock and

prevent others opening the door.

Reset Position

Open Position

(Blue Indicator)

Closed Position

(Blue Indicator)

Right Hand Lock Left Hand Lock

INTELLIGENT LOCKING SYSTEMS

CONTACT

sales@ojmar.com

+34.943.748.484

OJMAR HQ

Polígono Industrial de Lerun

20870 Elgoibar - SPAIN

OJMAR USA

17155 Von Karman Ave, S111

Irvine CA. 92614 - USA

www.ojmar.com

Dieses Handbuch passt für folgende Modelle

Andere Ojmar Sperren Handbücher

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung