Oki C9000 Series Bedienungsanleitung

USER’S GUIDE

C9800 MFP/C9800 GA MFP

C9800

C9000

C9800 MFP User’s Guide> 2

REFACE

Every effort has been made to ensure that the information in this document is

complete, accurate, and up-to-date. OKI Printing Solutions assumes no

responsibility for the results of errors beyond its control. OKI Printing Solutions also

cannot guarantee that changes in software and equipment made by other

manufacturers and referred to in this guide will not affect the applicability of the

information in it. Mention of software products manufactured by other companies

does not necessarily constitute endorsement by OKI Printing Solutions.

While all reasonable efforts have been made to make this document as accurate and

helpful as possible, we make no warranty of any kind, expressed or implied, as to

the accuracy or completeness of the information contained herein.

The most up-to-date drivers and manuals are available from the Oki web site:

http://www.okiprintingsolutions.com

Oki, OKI Printing Solutions and Microline are registered trademarks of Oki Electric

Industry Company, Ltd.

ENERGY STAR is a trademark of the United States Environmental Protection Agency.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corporation.

Other product names and brand names are registered trademarks or trademarks of

their proprietors.

As an ENERGY STAR Program Participant, the manufacturer has

determined that this product meets the ENERGY STAR guidelines

for energy efficiency.

This product complies with the requirements of the Council

Directives 89/336/EEC (EMC), 73/23/EEC (LVD) and 1999/5/EC

(R&TTE), as amended where applicable, on the approximation of

the laws of the member states relating to Electromagnetic

Compatibility, Low Voltage and Radio & Telecommunications

Terminal Equipment.

This product is equipped with the following embedded RFID read/write system:

Product name : Embedded RFID Read/Write System

Model number : RX4004A

The label on the RFID unit contains the following information:

Oki Data Corporation

Model number : RX4004A

Serial number :

Complies with IDA Standards DB100707

C9800 MFP User’s Guide> 3

OTES

CAUTIONS

AND

WARNINGS

NOTE

A note provides additional information to supplement the main

text.

AFETY

WARNINGS

This product has been carefully designed to give years of safe,

reliable performance. As with all electrical equipment, however,

there are a few basic precautions that should be taken to avoid

injury or damage, therefore please be careful to read and

understand the safety warnings on the following pages before

operating the product.

CAUTION!

A caution provides additional information which, if

ignored, may result in equipment malfunction or

damage.

WARNING!

A warning provides additional information which, if

ignored, may result in a risk of personal injury.

C9800 MFP User’s Guide> 4

WARNING!

Ensure all warning and instruction labels on

this product are read, understood and followed

in order to prevent any risk of injury.

Ensure this and all other documentation is both

read carefully and retained for future

reference.

This product may be heavy. Please check the

weight of this product and take all necessary

precautions to prevent any risk of personnel

injury.

This product must be placed on a flat solid

surface strong enough to support its weight to

prevent any risk of injury.

Ensure that there is adequate ventilation all

around this product to prevent overheating and

any risk of fire.



C9800 MFP User’s Guide> 5

WARNING!

Keep this product away from direct heat

sources such as radiators and out of direct

sunlight to prevent any risk of overheating.

The power supply required for this product is

220 - 240 VAC, 50/60 Hz. Refer to your

product's rating label for full power rating

details. Ensure that you have a suitable power

supply before connecting the product. If in

doubt contact your dealer or check with your

local power provider.

Ensure both the product and mains power

switches are in the OFF position before

connecting the AC power cable.

This product has an earthed plug as a safety

feature and will only connect to an earthed

socket. Do not attempt to defeat the earthing

or there is a risk of fire or shock.

C9800 MFP User’s Guide> 6

WARNING!

If using an extension cable or power strip

ensure that the total current rating (amperes)

of all connected equipment is less than the

maximum rating of the extension cable, power

strip or wall outlet. Otherwise fire or shock

may occur.

If this product is already supplied with a fitted

power strip then NO additional power strip or

extension cable should be used to connect to

the mains wall outlet.

Ensure the power cable is routed so as not to

be damaged or cause a trip hazard. If the cable

becomes frayed or damaged, replace it

immediately to prevent any risk of shock.

Do not twist, constrict or knot the power cable

as this can cause overheating which may lead

to fire or electric shock.

Ensure the power socket to which this product

is connected is easily accessible at all times.

Do not connect or disconnect the power plug

with a wet hand as this may cause electric

shock.

C9800 MFP User’s Guide> 7

WARNING!

Always hold the power plug to connect/

disconnect the power cable to/from the mains

socket. Unplugging by pulling on the cable can

cause fraying and may lead to fire or electric

shock.

Use only the power cable and power strip

supplied. Using a power cable or power strip

not intended for this product may lead to fire or

electric shock.

To avoid risk of fire and electric shock, do not

use the power cable or power strip supplied

with this product for any other electrical

equipment.

If you do not connect the power cord or any

other cables only as directed in the User's

Guide, this may result in a fire.

Ensure loose clothing and hair are kept clear of

moving parts when this product is in operation

to prevent possible risk of injury.

It is recommended that this product is

switched off prior to opening any covers.

When this product's cover is open, do not touch

the fuser unit or print head as you may receive

burns. Allow them to cool before touching.

C9800 MFP User’s Guide> 8

WARNING!

If this product's casing gets extremely hot or

smoke, unusual smells or abnormal noises are

emitted from this product, there is a risk of fire.

Unplug the mains connector and contact your

dealer.

If this product has been knocked over or

damaged, there is a risk of electric shock, fire

and/or injury. Unplug the mains connector and

contact your dealer.

If any liquid (for example water) is allowed to

enter this product, there is a risk of fire. Unplug

the mains connector and contact your dealer.

Do not place containers containing liquid on

this product as electric shock, fire and/or

injuries may occur.

If any foreign objects (for example clips) are

allowed to enter this product, there is a risk of

electric shock, fire and/or injury. Unplug the

mains connector before removing the object.

Do not introduce foreign objects into the

ventilation holes or operate this product with

covers open or removed as electric shock, fire

and/or injuries may occur.

C9800 MFP User’s Guide> 9

WARNING!

Do not use an extremely flammable spray near

this product as the product contains high

temperature parts that may cause a fire.

Switch this product off before cleaning to

prevent any risk of injury. Clean using a damp

cloth. Do not use liquid or aerosol cleaners.

Do not carry out any operations on this product

that are not specified in the User's Guide. This

may result in electric shock, fire and/or injury.

Do not touch the battery if one is fitted to the

product. There is a risk of explosion if the

battery is replaced by an incorrect type. The

product battery should not require replacement

during the life of the printer.

After installing additional memory, hard disk

drive or any other internally fitted option, any

covers removed or doors opened must be

closed or replaced and secured to prevent any

risk of fire or electric shock.

C9800 MFP User’s Guide> 10

WARNING!

If items such as scanners or finishers are fitted,

please exercise care when moving these items

so as to avoid risk of entrapment or personnel

injury.

If this product is installed on a cabinet or high

capacity feeder, ensure wheel locks are applied

once it is placed in final position for use, to

prevent risk of movement or injury.

Take care with toner powder. If swallowed,

induce vomiting and seek medical attention.

Never attempt to induce vomiting if person is

unconscious.

Take care with toner powder. If inhaled, move

the person to an open area for fresh air. Seek

medical attention.

Take care with toner powder. If it gets into the

eyes, flush with large amounts of water for at

least 15 minutes keeping eyelids open. Seek

medical attention.

Take care with toner powder. Spillages should

be treated with cold water and soap to help

reduce risk of staining skin or clothing.

Andere Handbücher für C9000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oki Multifunktionsdrucker Handbücher

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung