Oki 70040901 Bedienungsanleitung
Memory DIMM
Installation Instructions
DIMM PART NUMBER
64MB: 70040901
128MB: 70041101
256 MB: 70041201
512 MB: 70041901
1
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. Oki Data assumes no responsibility for the
results of errors beyond its control. Oki Data also cannot guarantee that changes in
software and equipment made by other manufacturers and referred to in this guide
will not affect the applicability of the information in it. Mention of software
products manufactured by other companies does not necessarily constitute
endorsement by Oki Data.
Copyright 2002 by Oki Data Americas, Inc. All rights reserved.
Written and produced by the Oki Data Training & Publications Department. Please
address any comments on this publication by mail to:
Training & Publications Dept.
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
by email to: pubs@okidata.com
For the latest product information, printer drivers, manuals, special offers, etc., we
welcome you to visit our multilingual web site:
http://www.okidata.com
OKI is a registered trademark/marque déposée/marca registrada Oki Electric
Industry Company, Ltd. Adobe and PostScript are trademarks of Adobe Systems,
Inc. which may be registered in certain jurisdictions. Macintosh is a trademark of
Apple Computer, Inc., registered in the U.S. and other countries. Windows and
Windows NT are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
2
Getting Started
The printers have four sockets for memory DIMM boards. You can expand the
printer’s memory up to 1 GB by installing two 512-MB DIMMs. To achieve the 1
GB memory in most models, you will need to replace the DIMM(s) provided with
512 MB DIMMs. The printer will not acknowledge more than 1 GB of memory.
Caution!
Circuit boards can be damaged by static electricity and rough handling. Keep
board in packaging until you’re ready to install it. DIMMs are sensitive to static
electricity. To avoid damage, ground yourself before handling DIMMs.
Model Memory Provided
C7300 64 Mb
C7300n 64 Mb
C7300dxn 128 Mb
C7500n 128 Mb
C7500dxn 128 Mb
C9300 128 Mb
C9300n 128 Mb
C9300dxn 192 Mb (64 + 128 MB)
C9500dxn 320 Mb (64 + 256 MB)
3
Prepare the Printer
1. Turn off the printer and unplug the power cord.
2. Detach the interface cable from the printer.
3. Remove and save the thumbscrew at the top and bottom which hold the control
board in place.
C7100/C7300/C7500 C9300/C9500
4
4. Grasp the control board, loosen it by wiggling it back and forth, and slide it out
of the printer.
C7100/C7300/C7500
C9300/C9500
5
Install the DIMM(s)
1. Locate the DIMM sockets (circled) on the control board.
2. Push out the white lock tabs at either end of the DIMM socket.
Caution!
Circuit boards can be damaged by static electricity and rough handling. To avoid
damage, ground yourself (touch metal) before handling DIMMs.
6
3. Remove the DIMM from its shipping package.
4. Align the DIMM with the narrow strip (1) on its metallic contact edge toward
the front of the control board, then carefully insert the DIMM in the socket.
Press down firmly, until you feel the board engage the connector, then raise the
white tabs to lock the DIMM in place.
5. Repeat steps 2 through 4 for each DIMM being installed.
7
Complete the Installation
1. Align the bottom of the control board with the track in the printer and slide it
back into place.
C7100/C7300/C7500
C9300/C9500
8
2. Reinstall the thumbscrews at the top and bottom of the board.
3. Reattach the computer interface cable.
4. Plug the power cord into the power outlet and turn on the printer.
C7100/C7300/C7500 C9300/C9500
9
Check for Proper Installation
Generate a MenuMap printout and check to be sure that the DIMMs are properly
installed.
1. Press MENU once or twice until INFORMATION MENU appears on the
display.
2. Press SELECT. PRINT MENU MAP appears on the display.
3. Press SELECT. The MenuMap prints.
4. Check the top of the MenuMap printout to verify that the DIMMs you installed
are listed (they will appear as DIMMs).
5. If the DIMM is not listed at the top of the MenuMap printout, remove the board
and make sure the memory DIMM is firmly in place, then print the MenuMap
again.
MENU ITEM VALUE SELECT
ON LINE
ON LINE
CANCEL
7654
3210
Dieses Handbuch passt für folgende Modelle
16
Inhaltsverzeichnis
Andere Oki Druckerzubehör Handbücher
Oki
Oki C9300 Series Bedienungsanleitung
Oki
Oki MC770 series Bedienungsanleitung
Oki
Oki ML520n Bedienungsanleitung
Oki
Oki C5100n Bedienungsanleitung
Oki
Oki 59375102 Bedienungsanleitung
Oki
Oki C6100dn Bedienungsanleitung
Oki
Oki ML520n Bedienungsanleitung
Oki
Oki 70037301 Bedienungsanleitung
Oki
Oki C530dn Stücklistenhandbuch
Oki
Oki LP441s Bedienungsanleitung
Oki
Oki C9600hdn Bedienungsanleitung
Oki
Oki T400 Bedienungsanleitung
Oki
Oki B6500 Series Bedienungsanleitung
Oki
Oki CX 1145 MFP Bedienungsanleitung
Oki
Oki C 9650dn Bedienungsanleitung
Oki
Oki RS-422 Bedienungsanleitung
Oki
Oki B4200 Bedienungsanleitung
Oki
Oki B4400 Series Stücklistenhandbuch
Oki
Oki OKILAN 310Eplus Bedienungsanleitung
Oki
Oki B4200 Bedienungsanleitung
