Olide 120B Bedienungsanleitung

AUTOMATIC DOOR SPECIALISTS

INSTALLER NOTES:

The programming of the Open&Close stopping points will occur after the initial

hardware installation. An uninstalled unit will result in constant motor rotation.

For support, please email us: [email protected]

INSTALLATION MANUAL

Automatic swing door opener Olide-120B

Olide

Contents

Technical Parameters..........................................................................................................................1

Components...................................................................................................................................2

Installations.................................................................................................................................... 3

3.1

Installation example......................................................................................................................... 3

3.2

Installation of base plate...................................................................................................................4

3.3

Installation of pull arm..................................................................................................................... 5

3.4

Installation of push arm.................................................................................................................... 6

3.5 Installation of Push arm for frameless glass door............................................................................. 8

3.7

Installation of operation system................................................................................................... ......9

3.9

Connection the operation system with the pull arm......................................................................... 10

3.10

Connection the operation system with the push arm....................................................................... 11

Electrical Connections........................................................................................................................12

Control panel details...........................................................................................................................12

4.1

Connections with a keypad .........................................................................................................12

4.2

Connections with a microwave sensor ............................................................................................. 13

4.3

Connections with PIR sensors ....................................................................................................

4.4

Connections for a safety motion top scan .........................................................................................13

4.5

Connections for push buttons.............................................................................................................. 14

4.8

Connections for magnetic locks ............................................................................................................15

4.9

Connections for electric locks.........................................................................................................15

4.10

Connection with the touchless hand sensor switches ........................................................................... 15

4.15

Double door synchronous settings..................................................................................................18

4.16 Wireless push buttons settings........................................................................................................19

4.17 Remote control settings..............................................................................................................20

Parameters Adjustment...........................................................................................................................21

5.1

hand programmer instruction.....................................................................................................................21

5.2

adjustment steps........................................................................................................................................22

Trouble Shooting.....................................................................................................................................23

4.6

Connections for wiring disabled push buttons....................................................................................14

4.7

Connections for wireless handicapped push buttons .............................................................................14

3.6 Installation of Pull arm for frameless glass door.............................................................................. 8

3.8

Installation of cover...................................................................................................................... ......9

4.11

Connecting to wireless touchless sensor switch Olide-508,Olide-512 .................................................16

4.12

Connecting to wired touchless sensor switch Olide-514,Olide-513 and Olide-513.............................. 16

4.13

Connecting to wired touchless sensor switch Olide-514,Olide-513 and Olide-513N........................... 16

4.14

Connecting to wired narrow handicap push button 515......................................................................... 17

Olide

1 Technical Parameters

Voltage: 110-220 VAC +/-10%

Power Consumption: 50W

Opening Time: 3-7 sec. @ 90 degrees

Hold Open Time: 1-30 sec. Adjustable

Max. Door Frame Depth:

Door Width:

Max. 1200mm / 47.2"

Max. Opening Angle:

450mm / 17.7"

Min. 660mm / 26"

120 degrees

Environment Temperature: -20C to 50C -4F to 122F

Protection Class: IP12D

Product Weight:

9Kg 19.8lbs

Dimensions: L540 x H100 x W80mm

L21.2" x W3.9" x H3.14"

Olide

2 Component

Pull Arm(Option for inswing opening) Push Arm(Option for outswing opening)

Sensor cable hole

Motor Assembly:

Cover Plate:

Base Plate:

Power cable hole

Pull Arm(Option for frameless glass inswing opening)

Push arm glass clamp

Olide

Installation

3.1 Installation example

Pull Arm

The door opens to the inside toward the unit using the pull arm assembly.

Push Arm

The door opens to the outside away from the unit using the push arm assembly.

Olide

Installation

3.2 Installation of base plate

0.88"(22.5mm)

5.90"(150mm)

5.90"(150mm) 6.49"(165mm)

1.2"(30.5mm)

hole

2.0"(52mm)

1.18"(30mm)

Right side hinge

0.88"(22.5mm)

6.49"(165mm)

1.2"(30.5mm)

2.0"(52mm)

Left side hinge

18.2"（464.5mm)

As the picture shows, the base plate should

be mounted to the frame with eight wood

screws or eight M6-15 countersunk screws.

Please note that 20mm sensor cable hole is

always to the right side and that the power

cable access is always to the left. The sensor

cable access hole is very near the edge of the

plate.

0.59"(15mm)

1.5"(38.5mm)

18.2"(464.5mm)

0.59"(15mm)

1.5"(38.5mm)

As the picture shows, the base plate should

be mounted to the frame with eight wood

screws or eight M6-15 countersunk screws.

1.18"(30mm)

5.90"(150mm) 5.90"(150mm)

Olide

Installation

3.3 Installation of Pull arm

Adjust the opening angle by

moving the stopper

(The stopper is at the left side

when left hand installation).

At door right

240（9.44")

（

240(9.44")

160(6.3")

Fix the slide rail of pull arm on the

door panel as shown using three

round head wood

Screws

(if the door panel is steel, please

use M6*15 cross recessed head

screws.)

Attach the slide rail of the pull

arm on the door panel as shown

using 3 screws

0.78"

29(1.44")

Olide

Installation

12.40"(315mm)

3.4 Installation of Push arm

Loosen this 3 bolts and adjust the push arm length

according to the door depth(L) until the angle between

the push arm and the door panel is 90° . At door right

50(1.96") 290(11.42")

Fix the support holder of push arm on the door panel as shown

using two round head wood screws

(if the door panel is steel, please use M6*15 cross

recessed head screws.)

35(1.29")

Olide

Installation

3.4 Installation of Push arm

Stop screw

Adjust the stop screw position slotted

hole to allow full opening of the door. Do

not exceed 90°.

Olide

Installation

3.5 Installation of Push arm for frameless glass door

Clasp the door with door clamp tightly,then

fix the clamp with M5*8 Hexagon socket set

screws.

M5*8 Set screws

Please connect the push arm to the door

clamp with the M5*8 Hexagon socket

set screws.

Then connect the push arm to the motor.

Olide

Andere Handbücher für 120B

Inhaltsverzeichnis

Andere Olide Türöffnungssystem Handbücher

Olide

Olide SD3108 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Label

Label NEPTIS/LE Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Series Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt