Olivetti MF22 Bedienungsanleitung
d-Color MF22 Printer Controller
Color Copier
SERVICE MANUAL
Code Y103290-2
PUBLICATION ISSUED BY:
Olivetti Tecnost S.p.A.
77, Via Jervis - 10015 Ivrea (TO)
Italy
Copyright © 2004, Olivetti
All rights reserved
Ver1.0 Mar. 2004
Y103290-2 Service Manual i
I GeneralII MaintenanceIII Adjustment/SettingIV Troubleshooting
CONTENTS
I General
1. Controller specifications.......................................................................................1-1
1.1 Supporting client specifications.........................................................................1-2
II Maintenance
1. Checking the controller firmware version.............................................................2-1
2. Firmware rewriting................................................................................................2-1
2.1 Preparations for updating the firmware..............................................................2-1
2.1.1 Service environment.....................................................................................2-1
2.1.2 Application to be used..................................................................................2-1
2.1.3 Installing the Cygwin.....................................................................................2-1
2.1.4 Writing into the Compact flash......................................................................2-3
2.2 Updating procedures of firmware ......................................................................2-5
2.2.1 Updating method..........................................................................................2-5
2.2.2 Action When Data Transfer Fails ..................................................................2-6
III Adjustment/Setting
1. Checking the external interface operation mode setting ......................................3-1
2. Setting for Printer Management Utility Remote Care...........................................3-1
2.1 Setting procedures.............................................................................................3-1
2.2 “Server Set (RD)” settings.................................................................................3-1
2.2.1 E-mail reception settings..............................................................................3-1
2.2.2 E-mail transmission settings.........................................................................3-2
2.2.3 Checking the E-mail Transmission/Reception Settings ................................3-2
2.3 Supplementary information: Log check.............................................................3-3
2.3.1 Example of successful test transmission/reception:.....................................3-3
2.4 Connection with Printer Management Utility
Remote Care Device Management Server........................................................3-3
IV Troubleshooting
1. Checking the system configuration ......................................................................4-1
2. Status codes ........................................................................................................4-1
3. Troubleshooting procedures.................................................................................4-1
3.1 Unable to print over the network........................................................................4-1
3.2 Unable to transmit data through Scan to FTP....................................................4-3
3.3 Unable to transmit data through Scan to E-Mail/Internet FAX...........................4-4
Ver1.0 Mar. 2004
ii Service Manual Y103290-2
I GeneralII MaintenanceIII Adjustment/SettingIV Troubleshooting
3.4 E-mail does not reach the destination when transmission through
Scan to E-Mail/Scan to Internet FAX is completed............................................4-5
3.5 Data cannot be received in Internet FAX...........................................................4-5
Ver.1.0 Mar. 2004 Controller specifications
Y103290-2 Service Manual 1-1
I General
I General
1. Controller specifications
Type Built-in type controller
Print Speed * B&W :35 ppm
Color :22 ppm
Printer Language PCL5c
CPU MPC8245-350MHz (using the main unit's CPU)
Program ROM 16 MB (8 MB ×2); *Including 46 internal fonts.
RAM 256 MB
Host Interface Ethernet (10/100BASE-TX, RJ-45)
IEEE1284 (Compatible/Nibble/ECP)*2
Network Protocol
IPX/SPX (Auto, Ethernet II, 802.2, 802.3, 802.3 SNAP)
NetBEUI
TCP/IP
SMTP. POP3, FTP, SNMP, HTTP 1.1
DHCP, ARP/ICMP, BOOTP
SLP
Network Print Service
Pserver (NDS) ... NetWare 4.x, 5.x, 6.x
Pserver (Bindery) ... NetWare 4.x
NDPS ... NetWare 5.x, 6.x
SMB
RAW Port Printing (Port 9100: To be changed from Page Scope Light)
IPP 1.1
LPD
IFAX to print
Data that can be received
Resolution: 200 ×100, 204 ×98, 200 ×200, 204 ×196,
204 ×391, 300 ×300, 400 ×400, 408 ×391
Size: Letter, Legal, Ledger, A4, B4, A3
Color Mode: Monochrome
Compression method: MH, MR, MMR
Network Scan Func-
tions
Scan to FTP with URL Notification
Scan to PC with URL Notification
Scan to E-Mail
Scan to HDD with URL Notification
TWAIN
Scan to IFAX
Data to be transmitted
Resolution: 200 ×200
Size: A4/Letter/Legal
Color Mode: Monochrome
Compression method: MH
Software Accessories
(1) Drive CD PCL5c Printer Driver, TWAIN Driver, Front Manager, BOX Utility
OS: Windows98/98SE/Me, NT4.0, 2000, XP, Server2003
Software Accessories
(2) Page Scope Web Connection has been built into the controller firmware.
Compatible Paper
Size Max. standard paper size A3 Wide
Resolution 600 ×600 dpi
Power Requirements Shared with main unit
Controller specifications Ver.1.0 Feb. 2004
1-2 Service Manual Y103290-2
I General
*1:When printing one side of the same A4 original
*2:The optional Local Interface Kit (EK-501) is required.
*3:If the controller option is not specified, the optional Hard Disk (HD-501) must be installed
on the main unit in order for the “Store to HDD” settings (printer driver settings), “Set
Numbering” function (printing with distribution numbers), the Scan to HDD operation,
and the box function to be used. (In order to use the “Set Numbering” function, the 256
MB Expanded Memory Unit (EM-301) must also be installed.)
1.1 Supporting client specifications
*1:The optional Local Interface Kit (EK-501) is required.
Operating Environ-
mental Requirements 10 - 30 °C
15 - 85 %
Fonts
Internal fonts:
Outline font: 45Agfa Intellifont: 35
TrueType font: 10
Bitmapped font: 1
Screen Font: 110 TrueType (Font Manager)
Options Not available *3
PC IBM PC and its compatible
RAM 64 MB or more (128MB or more for XP)
OS Windows 98/98SE, Windows Me, Windows 2000,
Windows XP, Windows NT 4.0, Windows Server 2003
Interface With a network connec-
tion
Connection
method Ethernet 10Base-T/100Base-TX
Protocols TCP/IP, NetBEUI,
IPX/SPX (NetWare 4.x, 5.x, 6.x)
With a parallel connection IEEE1284 (Compatible/Nibble/ECP)*1
Browser The following browser is required to use Page Scope Web Connection:
Netscape Communicator version 4.5 or later (Java-compliant)
Internet Explorer version 5.5 or later (Java-compliant)
Ver.1.0 Mar. 2004 Checking the controller firmware version
Y103290-2 Service Manual 2-1
II Maintenance
II Maintenance
1. Checking the controller firmware version
• The version of the controller firmware can be checked on the control panel of the
machine.
1.
Call the Tech. Rep. Mode to the screen.
2.
Touch [ROM Version].
3.
Touch [2].
4.
Check the versions of the following.
2. Firmware rewriting
2.1 Preparations for updating the firmware
2.1.1 Service environment
• OS: Windows2000
• Drive which enables writing/reading of Compact flash
• Compact flash (with 64MB or more)
2.1.2 Application to be used
• Cygwin (Free software)
2.1.3 Installing the Cygwin
• The software for writing the Firmware into Compact flash is installed into the PC.
1.
Execute the Self-uncompressing-file “Cygwin_set.exe” to develop it into the optional
directory.
2.
Execute the “setup.exe” inside the developed folder to start installing.
NOTES
• Except for the selection of “Install from Local Directory”, carry out installing
according to the instruction from Installer during installing.
• Do not change the Default “c:\cygwin”for the address to be installed.
3.
After installing, open the Property of “My Computer”, and click the “Environment Vari-
ables” of “Advanced” tab.
Controller NM
DSS MIO
DPS MIOM
Demo Page Font
Firmware rewriting Ver.1.0 Mar. 2004
2-2 Service Manual Y103290-2
II Maintenance
4.
Click the “New” in System Variable Setting.
5.
Set the following two values as the Windows Environmental Variable.
4036fs2620e0
Variable Name Variable Value
CYGWIN ntsec
HOME /home/username
4036fs2621e0
Ver.1.0 Mar. 2004 Firmware rewriting
Y103290-2 Service Manual 2-3
II Maintenance
2.1.4 Writing into the Compact flash
1.
Put the data of Firmware in the optional directory.
(C:\TSS2 in the below figure)
NOTE
• The file name of Firmware data consists of the “Release
Date_Version_CHECKSUM-****.exe”.
2.
Double-click the Firmware data, and specify the directory to be uncompressed, and
then uncompress it.
NOTE
• When old Firmware is still left in the specified directory to be uncompressed,
delete it before uncompressing.
3.
Mount the Compact flash on the PC, and check the Drive name, which was recognized
in the Windows.
(F-Drive in the following figure)
4.
Click “Start”→“Program”→“Accessories”→“Command prompt” to open the Command
prompt.
5.
Use the Command prompt to move into the uncompressed directory.
4036fs2622e0
4036fs2623e0
Firmware rewriting Ver.1.0 Mar. 2004
2-4 Service Manual Y103290-2
II Maintenance
6.
Specify the Drive of Compact flash, which was recognized through the procedure 3,
and execute the “mkcf.bat”.
(Input the C:\TSS2\card_work>mkfc f (Drive number) in the below figure, and push the
“Enter”.)
7.
Once the “mkcf.bat” is executed, data writing into the Compact flash is started.
8.
Upon completion of writing, CHECKSUM is executed. If CHECKSUM value is precisely
matched, “VERYFY OK” appears.
9.
Remove the Compact flash from PC.
NOTE
• When removing the Compact flash, be sure to check if data is written as normal
and then remove it according to the precise removing method.
4036fs2624e0
4036fs2625e0
Andere Handbücher für MF22
1
Inhaltsverzeichnis
Andere Olivetti Drucker Handbücher
Olivetti
Olivetti PG L2028 Special Bedienungsanleitung
Olivetti
Olivetti d-COLORP2230 Bedienungsanleitung
Olivetti
Olivetti STUDIOJET 300 Bedienungsanleitung
Olivetti
Olivetti d-color MF651 Bedienungsanleitung
Olivetti
Olivetti PG L2035 Bedienungsanleitung
Olivetti
Olivetti PG L2130 Bedienungsanleitung
Olivetti
Olivetti PK-512 Bedienungsanleitung
Olivetti
Olivetti d-COLOR P3100 Bedienungsanleitung
Olivetti
Olivetti d-Color P26 Bedienungsanleitung
Olivetti
Olivetti ZU-606 Bedienungsanleitung
Olivetti
Olivetti d-Color P20W Montageanleitung
Olivetti
Olivetti d-COLOR P2026 Bedienungsanleitung
Olivetti
Olivetti d-Color MF 3302 Bedienungsanleitung
Olivetti
Olivetti d-Copia 3501 Bedienungsanleitung
Olivetti
Olivetti PR2 plus Bedienungsanleitung
Olivetti
Olivetti XZAC4219-03 PR2 plus Bedienungsanleitung
Olivetti
Olivetti d-COLOR P2226 Bedienungsanleitung
Olivetti
Olivetti JS-505 Bedienungsanleitung
Olivetti
Olivetti PC-408 Bedienungsanleitung
Olivetti
Olivetti d-COLOR MF3300 Bedienungsanleitung
