Olivetti ARTJET 20 Bedienungsanleitung

This user guide contains information on

day-to-day use and care of your printer.

You will find further information about the

printer features and functions in the On-Line

Help that is loaded when you install the

driver contained in the Installation CD

supplied with the printer.

Artjet 20

Table of contents

Operating position ........................................... 3

Printeroperatorpanel......................................... 4

Printerstates ............................................ 4

Buttons - basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Buttons - special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Lightindicator............................................ 6

Moreaboutprintheads ........................................ 7

Replacingprintheads ....................................... 7

Print head care and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Cleaningtheprintheads......................................10

Moreaboutpaperandspecialprintingmedia ...........................12

Printingmedia............................................17

papersizes...........................................17

papertypes...........................................19

paperweights .........................................20

Driver settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Supplies.................................................22

2User guide

Operating position

1. Place your printer in the position most suited to your work place.

2. Click the corresponding printer position in the Options tab in the Printer Monitor.

•horizontal

vertical

The choice of operating position does not affect the printer performance.

User guide 3

Printer operator panel

The printer operator panel has two buttons and a light indicator.

Horizontal operating position Vertical operating position

Printer states

The behaviour of the buttons and light indicator will depend on the printer’s status.

•standby/sleep: no data to be printed;

•printing: from the reception of data until the completion of its printing;

•error: when an error has been detected and the printer is waiting for user intervention;

•service: user-invoked mode for special functions, independent of host.

Buttons - basic functions

Function Button Description

Printer on/off

Power

Toggles the printer ON/ OFF condition.

Paper control

Paper

1) If a sheet of paper is already present in the printer, causes its expulsion.

2) Loads a sheet of paper in the printer ONLY after a “paper error” signal.

Once you have corrected the error condition (paper out, paper jam), press to load

a document and continue your print job.

“Power”“Paper”

4User guide

Buttons - special functions

Function Buttons Description

Print head carriage

movement

Hold down Power and

press Paper, then release

both buttons together

Toggles the print head carriage loading/rest position.

The light indicator flashes with a simple ON-OFF

sequence.

This operation can also be done from the Printer Monitor.

Print test Hold down Power and

press Paper twice; then

release both buttons

together

The light indicator flashes with a two-flash sequence.

The print test is printed, after which the printer returns to

standby mode.

This operation can also be done from the Printer Monitor.

Clean print heads Hold down Power and

press Paper three times;

then release both buttons

together

The light indicator flashes with a three-flash sequence.

A print head cleaning cycle is executed, after which the

printer returns to standby mode.

This operation can also be done from the Printer Monitor.

Demo page Hold down Power and

press Paper four times;

then release both buttons

together

The light indicator flashes with a four-flash sequence.

The demo page is printed, after which the printer returns

to standby mode.

This operation can also be done from the Printer Monitor.

Hex dump Hold down Power and

press Paper seven times;

then release both buttons

together

The light indicator flashes with a seven-flash sequence.

All data now transmitted to the printer will be printed in

its hexadecimal format.

This feature can be activated ONLY from the operator

panel and should be used only if requested by your

technical support engineer, as it can generate long

print-outs.

Clean paper feed

rollers

Hold down Power and

press Paper nine times;

then release both buttons

together

The light indicator flashes with a nine-flash sequence.

The paper feed rollers will start turning without loading the

paper. To clean the rollers, press lightly on them with a

clean, damp, lint-free cloth.

Toexitfromthisfunction,youmustswitchoffthe

printer.

User guide 5

Light indicator

The status of the light indicator indicates the different printer conditions.

Status Condition

off The printer is not powered.

lit The printer is powered.

flashing slowly The printer is receiving data.

flashing rapidly An operating error has occurred:

Paper out condition.

Solution: Load paper (see “Loading paper ... ”intheInstallation Guide) and press

PAPER.

Paper jam condition.

Solution: Remove the jammed page (see the specific topic in the on-line documentation

loaded when you installed the printer driver).

Print head insertion/replacement operation.

You have moved the print head carriage to the head loading position (using the button

sequence on the operator panel or the ”Change” button in the Printer Monitor).

Solution: Return the print head carriage immediately to its rest position, repeating the

button sequence, or replace the print head (see specific section in More about print

heads).

flashing very rapidly Failure condition.

Switch off the printer and disconnect it from the electrical power supply. Make sure that

the print head carriage and paper feed paths are not obstructed and then reconnect

and switch on the printer.

If the light indicator continues flashing rapidly, disconnect the printer and call the

technical support service or your dealer.

flashing with specific

variable sequence

One of the service functions (see previous table - “Buttons - special functions”).

6User guide

More about print heads

Replacing print heads

You should remove a print head from the printer ONLY to replace it or to repeat its insertion in the case

of faulty printing.

In the description of the operator tasks in this section, the illustrations on the left refer to the

vertical printer position, those on the right, to the horizontal position.

1. With the printer idle (in standby),

(a) open the Printer Care tab in the Printer Monitor and click on the Change button,

(b) press and hold the “Power” button on the operator panel and press “Paper” once; release the two

buttons together.

2. Open the top cover: the print head carriage will be in the head loading position.

3. Press the print head release lever to release either:

(a) the black print head, or

User guide 7

(b) the colour print head.

4. Pulling upwards by the thumb and finger grip:

(a) remove the black print head,

(b) remove the colour print head.

5. Insert a new print head of the SAME type (black/colour) and close the printer cover.

6. Click on the appropriate New Head buttoninthePrinter Care tab in the Printer Monitor and then

run the Align function in the same tab.

8User guide

Print head care and precautions

If you have problems inserting the print head:

•Make sure the print head carriage is in the print head loading position.

•Check that the print head/chamber is clean and free of foreign bodies.

•NEVER force the print head into the chamber; always remove it completely and repeat the entire

insertion operation.

If the quality of printing is not optimum, do the “Clean” operation.

•Always keep the print heads sealed in their containers until they are to be used.

•Remember to remove the protective tape before inserting the print head in the printer.

•Take care not to get ink on your clothes; the ink in the print head stains.

•Do NOT attempt to refill the print head with ink, as this damages the print head and the printer.

•DO NOT shake the print head; it is not a fountain pen. If it does not print, do the cleaning operations

described in “Cleaning the print head ”.

Switching off your printer before your computer will guarantee that the print head carriage is in

its rest position. When the printer is powered, the print head carriage will automatically return

to its rest position and go into standby mode after approximately two minutes of inactivity.

User guide 9

Cleaning the print heads

The print heads are cleaned automatically at regular intervals while the printer is powered. This

operation clears the print head nozzles, guaranteeing the ink flow. If you have a problem with the

printing quality that is not solved by this automatic nozzle clearing operation, you can do the same

operation, using the “CLEAN” function in the Printer Care tab in Printer Monitor.

If you have a problem with the printing quality that is not solved by the “CLEAN” feature, run a Print Test

and then proceed as follows:

1. Clean the electrical contacts

(a) Press the “Change” button in the Printer Care tab in the Printer Monitor.

(b) Open the printer cover; release and remove the print head that is causing the problem.

with a slightly damp lint-free cloth, taking care not to touch the print head nozzles.

(d) Re-insert the print head in the printer and close the printer cover.

(e) Repeat the print test.

10 User guide

Inhaltsverzeichnis

Andere Olivetti Drucker Handbücher

Olivetti

Olivetti PG L2028 Special Bedienungsanleitung

Olivetti

Olivetti d-COLORP2230 Bedienungsanleitung

Olivetti

Olivetti d-Color P126W Technisches Handbuch

Olivetti

Olivetti d-COLOR MF3300 Bedienungsanleitung

Olivetti

Olivetti JS-504 Bedienungsanleitung

Olivetti

Olivetti XZAC4219-03 PR2 plus Bedienungsanleitung

Olivetti

Olivetti d-Copia 3501 Bedienungsanleitung

Olivetti

Olivetti JP 90 Bedienungsanleitung

Olivetti

Olivetti PGL2535 Bedienungsanleitung

Olivetti

Olivetti PG L22 Special Bedienungsanleitung

Olivetti

Olivetti d-Color P20W Bedienungsanleitung

Olivetti

Olivetti FS-529 Bedienungsanleitung

Olivetti

Olivetti d-Color P116 Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF222plus Bedienungsanleitung

Olivetti

Olivetti PR4 SL Bedienungsanleitung

Olivetti

Olivetti PG L2235 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Olivetti

Olivetti FK-502 Bedienungsanleitung

Olivetti

Olivetti JP101 Datenblatt

Olivetti

Olivetti PK-516 Bedienungsanleitung

Olivetti

Olivetti d-Copia 163MF Bedienungsanleitung

Olivetti

Olivetti PR 4 Bedienungs- und Wartungshandbuch

Olivetti

Olivetti Simple bluetooth Bedienungsanleitung

Olivetti

Olivetti JS-505 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung