Olivetti PK-516 Bedienungsanleitung

PK-516

Option Printer

SERVICE MANUAL

Code Y110630-3

PUBLICATION ISSUED BY:

Olivetti S.p.A.

77, Via Jervis - 10015 Ivrea (TO)

Italy

Revision history

After publication of this service manual, the parts and mechanism may be subject to change for

improvement of their performance.

Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be

issued with a revision mark added as required.

Revision mark:

• To indicate clearly a section revised, is shown at the left margin of the revised section.

The number inside represents the number of times the revision has been made.

• To indicate clearly a page that contains the revision, is shown near the page number of the

corresponding page.

The number inside represents the number of times the revision has been made.

NOTE

Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.

• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:

The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.

• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:

The revision marks for Ver. 2.0 are left as they are.

PK-516OUTLINEMAINTENANCE

Field Service Ver. 1.0 Jan. 2009

CONTENTS

PK-516

OUTLINE

1. PRODUCT SPECIFICATION .................................................................................. 1

MAINTENANCE

2. PERIODICAL MAINTENANCE PROCEDURE ....................................................... 3

3. OTHER MAINTENANCE ITEM ............................................................................... 4

3.1 Disassembly/Adjustment prohibited items ............................................................ 4

3.2 Disassembly/reassembly parts list........................................................................ 5

3.3 Disassembly/reassembly procedure..................................................................... 5

3.3.1 Punch kit ....................................................................................................... 5

3.3.2 Punch oscillating motor (M302) .................................................................... 8

3.3.3 Punch drive motor (M301) ............................................................................ 8

PK-516

OUTLINEMAINTENANCE

Field Service Ver. 1.0 Jan. 2009

Blank Page

Field Service Ver. 1.0 Jan. 2009 1. PRODUCT SPECIFICATION

PK-516OUTLINE

OUTLINE

1. PRODUCT SPECIFICATION

A. Type

B. Functions

C. Paper type

D. Machine specifications

E. Operating environment

• Conforms to the operating environment of the main body.

NOTE

• These specifications are subject to change without notice.

Name Punch unit

Type FS-integrated type punching operation device

Punching method Stops and punches every paper

No. of holes 2-3 holes / 2-4 holes / 4 holes

Hole diameter/pitch

2 holes / I8.0 mm / 70 mm pitch - 3 holes I 6.5 mm / 108 mm pitch

2 holes / I6.5 mm / 80 mm pitch - 4 holes I 6.5 mm / 80 mm pitch

4 holes / I6.5 mm / 70 mm, 21 mm pitch

Supported mode Punch mode, through mode

Applicable post processing

mode Sort, group, staple

Size

2 hole/Sweden 4 hole punch setting:

A3, B4, A4/A4S, B5/B5S, A5/A5S,

8 x 13, 8 x 13S, 8-1/4x 13, 8-1/2x 13, 8-1/8x 13-1/4, 11 x 17, 8-1/2x 14,

8-1/2x 11/8-1/2x 11S, 5-1/2x 8-1/2, 5-1/2x 8-1/2S, 8K, 16K/16KS

7-1/4x 10-1/2, 7-1/4x 10-1/2S, 8-2/3x 13S, 8-1/2x 13S, 8-1/4x 13S,

8-1/8x 13-1/4S, 8-1/2x 13-1/2S

3 hole/4 hole punch setting:

A3, B4, A4, B5

11 x 17, 8 1/2x 11, 7 1/4x 10 1/2, 8K, 16K

Supported paper Plain paper, bond paper, colored paper, coated paper

(Main unit specifications prioritized)

Weight 64 to 256 g/m2

Punch prohibited paper

Label paper, tab paper, transparency film, 2nd base paper, holed paper,

and the other paper that may interfere with the operation of the punch unit

or the punch blade

Power requirements DC 24 V (supplied from the main body)

DC 5 V (supplied from the main body)

Max. power consumption 40 W or less

Dimensions 161 mm (W) x 650 mm (D) x 234 mm (H)

6.34 inch (W) x 25.60 inch (D) x 9.21 inch (H)

Weight 4.5 kg (9.92 lb)

Y110630-3 Sevice Manual

1. PRODUCT SPECIFICATION Field Service Ver. 1.0 Jan. 2009

PK-516

OUTLINE

Blank Page

Service Manual Y110630-3

Field Service Ver. 1.0 Jan. 2009 2. PERIODICAL MAINTENANCE PROCEDURE

PK-516MAINTENANCE

MAINTENANCE

2. PERIODICAL MAINTENANCE PROCEDURE

• Periodically replaced parts are not employed.

Y110630-3 Sevice Manual

3. OTHER MAINTENANCE ITEM Field Service Ver. 1.0 Jan. 2009

PK-516

MAINTENANCE

3. OTHER MAINTENANCE ITEM

3.1 Disassembly/Adjustment prohibited items

A. Paint-locked screws

NOTE

• To prevent loose screws, a screw lock in blue or green series color is applied to

the screws.

• The screw lock is applied to the screws that may get loose due to the vibrations

and loads created by the use of machine or due to the vibrations created during

transportation.

• If the screw lock coated screws are loosened or removed, be sure to apply a screw

lock after the screws are tightened.

B. Red-painted screws

NOTE

• The screws which are difficult to be adjusted in the field are painted in red in order

to prevent them from being removed by mistake.

• Do not remove or loosen any of the red-painted screws in the field. It should also

be noted that, when two or more screws are used for a single part, only one repre-

sentative screw may be marked with the red paint.

C. Variable resistors on board

NOTE

• Do not turn the variable resistors on boards for which no adjusting instructions

are given in Adjustment/Setting.

D. Removal of PWBs

CAUTION

• When removing a circuit board or other electrical component, refer to “Handling of

PWBs” and follow the corresponding removal procedures.

• The removal procedures given in the following omit the removal of connectors and

screws securing the circuit board support or circuit board.

• Where it is absolutely necessary to touch the ICs and other electrical components

on the board, be sure to ground your body.

Service Manual Y110630-3

Field Service Ver. 1.0 Jan. 2009 3. OTHER MAINTENANCE ITEM

PK-516MAINTENANCE

3.2 Disassembly/reassembly parts list

3.3 Disassembly/reassembly procedure

3.3.1 Punch kit

1. Remove the finisher from the main body.

2. Remove the board cover [1].

3. Remove the punch scraps box [1].

4. Remove the harness from three wire

saddles [1].

Section Part name Ref. page

Unit Punch kit P. 5

Others Punch oscillating motor (M302) P. 8

Punch drive motor (M301) P. 8

A11TF2C500DA

[1]

A11TF2C501DA

[1]

A11TF2C502DA

[1]

Y110630-3 Sevice Manual

Inhaltsverzeichnis

Andere Olivetti Drucker Handbücher

Olivetti

Olivetti PR4 SR Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Olivetti

Olivetti PR2 PLUS Bedienungsanleitung

Olivetti

Olivetti Artjet 10 Bedienungsanleitung

Olivetti

Olivetti PGL 12EN Bedienungsanleitung

Olivetti

Olivetti FK-502 Bedienungsanleitung

Olivetti

Olivetti PGL2540 Bedienungsanleitung

Olivetti

Olivetti JP101 Datenblatt

Olivetti

Olivetti Simple bluetooth Bedienungsanleitung

Olivetti

Olivetti d-Color MF222 Bedienungsanleitung

Olivetti

Olivetti DP N24 Bedienungsanleitung

Olivetti

Olivetti ZU-606 Bedienungsanleitung

Olivetti

Olivetti d-Copia 163MF Bedienungsanleitung

Olivetti

Olivetti PG L2130 Bedienungsanleitung

Olivetti

Olivetti PG L2028 Special Bedienungsanleitung

Olivetti

Olivetti d-COLOR P2021 Bedienungsanleitung

Olivetti

Olivetti XZAC4219-03 PR2 plus Bedienungsanleitung

Olivetti

Olivetti PC-408 Bedienungsanleitung

Olivetti

Olivetti PG L2435 Bedienungsanleitung

Olivetti

Olivetti PR2 plus Bedienungsanleitung

Olivetti

Olivetti PG L8L Bedienungsanleitung

Olivetti

Olivetti FS-603 Bedienungsanleitung

Olivetti

Olivetti MF22 Bedienungsanleitung

Olivetti

Olivetti MY_WAY Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung