OLT Dog House Bedienungsanleitung

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 1

Dog House

Assembly Manual

Revision #1.0

Oct 30, 2019

Thank you for purchasing

our Dog House. Please take

the time to identify all the

parts prior to assembly.

In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 with-

in 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge,

within 10 business days of this notification. Replacement parts will not be provided free of charge after the 30 day

grace period.

All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manufacturing

and workmanship. Costs incurred for customer installations are not included.

Failure to use supplied parts included in this kit could result in poor product performance and may void your warranty.

Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our written instructions.

- Have a regular maintenance plan to ensure screws, hinges, handles and other parts

are tightly affixed.

- To keep any liquids from soaking into the plywood floor, we recommend you paint

the floor of your Dog House with a latex based paint before attaching the walls

- In areas with high or gusty wind conditions, it is advisable to install the structure

securely to the ground.

Customer agrees to hold Outdoor Living Today and any Authorized

Dealers free of any liability for improper installation, maintenance and

repair.

Cleaning your Dog House

couldn’t be simpler, just

open the hinged roof for

easy access and sweep it

out.

After closing the roof,

remember to reattach the

hook which is installed in

Step 25.

Thank you for purchasing our Dog House.

Please take the time to identify all the parts prior to assembly.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 2

Note: All Trim and Facia pieces will be positioned rough face out when installed.

A. Floor Section

Floors

1A: 4 - 1 ½” x 2 ½” x 40” - Floor Framing Pieces - Long

2A: 4 - 1 ½” x 2 ½” x 15 ½” - Floor Framing Pieces - Short

3A: 2 - 1/2” or 5/8” x 18 ½” x 40” - Plywood Flooring

B. Wall Section

Wall Panels

1B: 2 - 18 ½” x 24 ¼” - Rear Wall Panels

2B: 2 - 18 ½” x 26 ¾” - Side Rear Wall Panels

3B: 2 - 18 ½” x 29 3/8” - Side Front Wall Panels

4B: 1 - 18 ½” x 29 3/8” - Front Wall Panel

5B: 1 - 18 ½” x 29 3/8” - Door Section

C. Rafter and Roof Section

Roof & Rafters

1C: 3 - 1 ½” x 2 ½” x 46” - Rafters

2C: 1 - 42” x 25 ½” - Rear Roof Panel

3C: 1 - 42” x 24 ½” - Front Roof Panel

D. Trim & Miscellaneous Section

Wall Trim

1D: 2 - 1” x 1 ½” x 27” - Side Wall Vertical Trim - L/R

2D: 1 - 1” x 1 ½” x 24 ¾” - Rear Wall Vertical Trim

Door Trim

3D: 1 - 1” x 2 ¼” x 21 5/8” - Vertical Left Side Door Trim

4D: 1 - 1” x 1 ½” x 21 5/8” - Vertical Right Side Door Trim

5D: 1 - 1” x 1 ½” x 19 5/16” - Horizontal Top Door Trim

Wall Trim

6D: 1 - 1” x 1 ½” x 6 7/8” - Front Wall Vertical Trim

7D: 2 - 1” x 3 ¼” x 24 ¾” - Rear Corner Trim - L/R

8D: 2 - 1” x 3 ¼” x 29 ¾” - Front Corner Trim - L/R

Facia

9D: 1 - ¾” x 3 ½” x 40 9/16” - Front Facia

10D: 1 - ¾” x 3” x 40 9/16” - Rear Facia

11D: 2 - ¾” x 3 ½” x 46” - Side Facia (Angle Cut Ends)

12D: 1 - ½” x 3 ½” x 8” - Facia Detail Plate

Food Tray

13D: 2 - ¾” x 4 ¼” x 7 ¼” - Front Food Tray - Sides

14D: 1 - ¾” x 7 ¼” x 16” - Front Food Tray - Bottom

15D: 1 - 11/16” x 4 ¼” x 17 ½” - Front Food Tray - Back

Front Shelf

16D: 4 - ¾” x 1 ½” x 17 11/16” - Shelf Slats

17D: 2 - ¾” x 8” x 8 ¾” - Shelf Supports

1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall

panel siding is damaged.

Steps

19-20

22-24

26-29

Steps

4-12

1-3

13-18

Parts List - Pages 2 and 3

30-31

32-33

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 3

Dog House HARDWARE PACKAGE

Hardware Kit (Provided)

Safety Glasses Work Gloves

Safety Equipment Required (Not Provided)

Screw Gun/Drill Tape Measure

Hammer Wood Clamp

Level Pliers

Tools Required (Not Provided)

1/8” Drill Bit

73 Pcs.

28 Pcs.

20 Pcs.

Finishing Nail

60 Pcs.

Y14 - 6” Hook & Eye 1 Pc.

Y37 - Pull Handles 2 Pcs.

Black Headed

10 Pcs.

Black Headed

26 Pcs.

SB1 - 3/4” Screws

SB3 - 1” Screws

S2 - 1 1/4” Screws

S3 - 2” Screws

S1 - 2 1/2” Screws

N5 - 2” Nails

BR1 - Square Drive Bit

Plywood Floor (2)

Floor Framing

Pcs - Short (4)

Exploded Floor Section

A. Floor Section Exploded view of all parts necessary to complete

Floor Section. Identify all parts prior to starting.

Note: Floor Footprint is 37” wide x 40” deep.

Foundation Material

not included.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 4

Floor Framing

Pcs - Long (4)

You can find the

Square Drive Bit, for

the screws, in the

Hardware Kit Bag.

Framing Flush.

Pilot Hole

first.

Hardware

S1 - 2 1/2” Screws x 16 total

1. Lay out 2 Floor Framing Pieces - Long and 2 Floor

Framing Pieces - Short with framing flush as illustrated above.

Attach ends of long pieces to short pieces with 2 - 2 1/2” Screws

per end. Complete other floor frame section the same. You can

find the Square Drive Bit for the screws in with the Hardware

Kit Bag.

Parts

1A - Floor Framing Pieces - Long

(1 1/2” x 2 1/2” x 40”) x 4

2A - Floor Framing Pieces - Short

(1 1/2” x 2 1/2” x 15 1/2”) x 4

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 5

37”

40”

Front

Hardware

S1 - 2 1/2” Screws

x 4 total

2. With both floor frame sections assembled, attach floor sections

together with 4 - 2 1/2” Screws. Check outer dimensions to ensure floor

is assembled correctly.

Hardware

S2 - 1 1/4” Screws

x 16 total

3. Position Floor Plywood so it sits flush with outside

of floor framing. When correctly positioned, attach with

8 - 1 1/4” Screws per piece.

Parts

3A - Floor Plywood

(18 1/2” x 40”) x 2

B. Wall Section Exploded view of all parts necessary to

complete the Wall Section. Identify all parts

prior to starting.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 6

Rear Wall

Panels (2)

Side Rear Wall

Panels (2)

Side Front Wall

Panels (2)

Front Wall

Panel (1)

Door Section (1)

Flush with

floor frame.

Siding overhangs floor.

4. Start by positioning a Rear Wall panel on top of plywood floor. The Wall Panel

bottom framing will sit flush with floor framing. Wall siding will overhang the floor.

Important: Make sure all walls are aligned in their upright position. If not, water

may leak into your shed.

Parts

1B - Rear Wall Panel

(18 1/2” x 24 1/4”) x 1

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 7

Do Not Attach Walls

To Floor until Step 12.

Pilot Hole

first.

Pilot Hole

first.

Rear Wall

Side Rear Wall

Hardware

S1 - 2 1/2” Screws x 2 total

5. Butt vertical studs of Side Rear Wall and Rear Wall together and

attach with 2 - 2 1/2” Screws. Have helper push wall framing together

while securing to ensure tight fit. Note: Drill pilot holes in studs to

prevent splitting.

Parts

2B - Side Rear Wall Panel

(18 1/2” x 26 3/4”) x 1

6. With the corner wall attachment complete, position the second

Rear Wall panel in place so bottom wall framing is sitting flush with

outside floor framing. When positioned correctly, attach both wall

panel studs together with 2 - 2 1/2” Screws.Hardware

S1 - 2 1/2” Screws x 2 total

Parts

1B - Rear Wall Panel

(18 1/2” x 24 1/4”) x 1

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 8

Pilot Hole

first.

Pilot Hole

first.

Pilot Hole

first.

7. Next, position Side Front Wall panel on

floor and attach as per Step 6.

Hardware

S1 - 2 1/2” Screws

x 2 total

Parts

3B - Side Front Wall Panel

(18 1/2” x 29 3/8”) x 1

8. Continue with the other Side Rear Wall

panel, attaching as per Step 5.

Hardware

S1 - 2 1/2” Screws

x 2 total

Parts

2B - Side Rear Wall Panel

(18 1/2” x 26 3/4”) x 1

9. Continue with the other Side Front Wall

panel, attaching as per Step 6.

Hardware

S1 - 2 1/2” Screws

x 2 total

Parts

3B - Side Front Wall Panel

(18 1/2” x 29 3/8”) x 1

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 9

Pilot Hole

first.

Pilot Hole

first.

10. Next, position the Front Wall panel on

floor and attach as per Step 5.

Hardware

S1 - 2 1/2” Screws

x 2 total

Parts

4B - Front Wall Panel

(18 1/2” x 29 3/8”) x 1

11. Locate pre-assembled Door Section

and position flush with wall framing. Attach

with 4 - 2 1/2” Screws from inside wall

studs as shown.

Hardware

S1 - 2 1/2” Screws x 4 total

Parts

5B - Door Section

(18 1/2” x 29 3/8”) x 1

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 10

50 1/4”

Advice: Prior to fastening walls and installing

rafters, take time to confirm your walls are

level, square and plumb.

Measure diagonal at top and bottom of walls

corner-to-corner. This should be approximately

50 1/4”. More importantly, if measurements are

not within 1/4”, your walls are not square.

Adjusting now will make it easier to install the

roof.

Pilot

Hole first.

12. To complete Wall Section, attach bottom wall plates to plywood floor

with 14 - 2 1/2” Screws. Prior to securing, make sure wall panels are aligned

correctly on the floor. Refer to Step 4. Wall siding should overhang floor

while bottom wall plates should sit flush with floor.

Hardware

S1 - 2 1/2” Screws

x 14 total

Inhaltsverzeichnis

Andere OLT Gartenmöbel Handbücher

OLT

OLT 24 Bedienungsanleitung

OLT

OLT Grand Garden Chalet 6X3 Bedienungsanleitung

OLT

OLT 12ft Octagon Bayside Bedienungsanleitung

OLT

OLT 10ft X 16ft Breeze Pergola Bedienungsanleitung

OLT

OLT Naramata Bedienungsanleitung

OLT

OLT 12ft X 16ft Breeze Pergola Bedienungsanleitung

OLT

OLT Outdoor Living Today Bedienungsanleitung

OLT

OLT Bayside Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

Polywood

Polywood 400 Series Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung