Olympus InterBox EIB-T-8-M-15-OM Bedienungsanleitung
DMTA031-01EN — Rev. B
October 2014
InterBox
User’s Manual
This instruction manual contains essential information on how to use this Olympus product safely and effectively.
Before using this product, thoroughly review this instruction manual. Use the product as instructed.
Keep this instruction manual in a safe, accessible location.
Olympus Scientific Solutions Americas, 48 Woerd Avenue, Waltham, MA 02453,
USA
Copyright © 2009, 2014 by Olympus. All rights reserved. No part of this
publication may be reproduced, translated, or distributed without the express
written permission of Olympus.
This document was prepared with particular attention to usage to ensure the
accuracy of the information contained therein, and corresponds to the version of
the product manufactured prior to the date appearing on the title page. There
could, however, be some differences between the manual and the product if the
product was modified thereafter.
The information contained in this document is subject to change without notice.
Part number: DMTA031-01EN
Rev. B
October 2014
Printed in Canada
All brands are trademarks or registered trademarks of their respective owners and
third party entities.
DMTA031-01EN, Rev. B, October 2014
Table of Contents
iii
Table of Contents
List of Abbreviations ........................................................................................ v
Labels and Symbols ........................................................................................... 1
Important Information — Please Read Before Use ..................................... 5
Intended Use .......................................................................................................................... 5
Instruction Manual ................................................................................................................ 5
Instrument Compatibility ..................................................................................................... 6
Repair and Modification ....................................................................................................... 7
Presence of Visual Interferences or Phantom Spots ......................................................... 8
Safety Symbols ....................................................................................................................... 8
Safety Signal Words ............................................................................................................... 9
Note Signal Words ................................................................................................................. 9
Safety ..................................................................................................................................... 10
Warnings ............................................................................................................................... 10
Equipment Disposal ............................................................................................................ 11
CE (European Community) ............................................................................................... 11
WEEE Directive .................................................................................................................... 11
EMC Directive Compliance ................................................................................................ 12
Warranty Information ......................................................................................................... 12
Technical Support ................................................................................................................ 13
Introduction ...................................................................................................... 15
1. Overview ..................................................................................................... 17
2. Connections and Cables ........................................................................... 19
2.1 Connections to the Acquisition Unit ...................................................................... 19
2.2 Power-Cable Connector—for Models with TRPP 5810 Pulser/Preamplifier ... 20
DMTA031-01EN, Rev. B, October 2014
Table of Contents
iv
2.3 TOFD Connectors— for Models with TRPP 5810 Pulser/Preamplifier ............ 21
2.4 Conventional UT Connectors .................................................................................. 23
2.5 Phased Array Probe Connectors ............................................................................. 23
2.6 Connecting the Phased Array Connectors ............................................................ 24
2.7 InterBox Installation ................................................................................................. 27
3. Maintenance ................................................................................................ 29
3.1 Preventive Maintenance ........................................................................................... 29
3.2 Unit Cleaning ............................................................................................................. 29
4. Specifications .............................................................................................. 31
4.1 TRPP 5810 Specifications ......................................................................................... 32
4.1.1 12 V Connector ............................................................................................... 33
4.1.2 P and R Connectors ........................................................................................ 34
4.2 InterBox Connector Configurations and Ordering Numbers ............................ 34
List of Figures ................................................................................................... 37
List of Tables ..................................................................................................... 39
Index ................................................................................................................... 41
DMTA031-01EN, Rev. B, October 2014
List of Abbreviations
vi
DMTA031-01EN, Rev. B, October 2014
Labels and Symbols
1
Labels and Symbols
Safety-related labels and symbols are attached to the instrument at the locations
shown in Figure i-1 on page 1. If any or all of the labels or symbols are missing or
illegible, please contact Olympus.
Figure i-1 Labels location
Location of TRPP rating plate
label (see Table 1 on page 2)
Location of InterBox rating plate
label (see Table 1 on page 2)
DMTA031-01EN, Rev. B, October 2014
Labels and Symbols
2
Table 1 Content of the rating label
Rating plate
label:
Content
The CE marking is a declaration that this product conforms to
all the applicable directives of the European Community. See
the Declaration of Conformity for details. Contact your Olympus
representative for more information.
The WEEE symbol indicates that the product must not be
disposed of as unsorted municipal waste, but should be
collected separately.
The direct current symbol.
S/N The serial number.
DMTA031-01EN, Rev. B, October 2014
Labels and Symbols
3
To avoid the risk of electric shock, do not touch the inner conductor of the LEMO-00
P1 OUT and P2 OUT connectors for the TRPP 5810 pulser/preamplifier. Up to 200 V
can be present on the inner conductor.
CAUTION
TRPP 5810 LEMO 00
P1 OUT and P2 OUT
connectors inner
conductors
DMTA031-01EN, Rev. B, October 2014
Labels and Symbols
4
Inhaltsverzeichnis
Beliebte Scannerzubehör Handbücher anderer Marken
HP
HP Scanjet 5370C Series Bedienungsanleitung
imacon
imacon Flextight Damaged Original Kit Bedienungsanleitung
ARS-Imago
ARS-Imago POLAROID SCAN MASK Bedienungsanleitung
Epson
Epson B813112 Betriebsanleitung
Datalogic
Datalogic GFC-2 00 Series Bedienungsanleitung
Colortrac
Colortrac MK4 UNIVERSAL REPRO STAND Bedienungsanleitung
