Omega Engineering UWTC-REC3 Bedienungsanleitung

User’s Guide

omega.com

e-mail: [email protected]

For Latest Product Manuals

omegamanual.info

Shop on line at

Wireless-to-Ethernet Receiver

UWTC-REC3

TABLE OF CONTENTS

Part 1: Introduction

1.1 Safety and EMC Considerations .................................................................2

1.2 Before You Begin..........................................................................................2

1.3 Description....................................................................................................2

Part 2: Hardware

2.1 Parts of the Receiver....................................................................................4

2.2 Mounting - Receiver .....................................................................................5

2.3 DIP Switch Setup - Receiver .......................................................................6

2.3.1 Wireless Settings ...........................................................................6

2.3.2 Ethernet Settings ...........................................................................6

2.4 Network Communication Interfaces ..........................................................7

2.4.1 10Base-T RJ-45 Pinout...................................................................7

2.4.2 10Base-T Crossover Wiring...........................................................7

Part 3: Network Configuration

3.1 Ethernet (MAC) Address .............................................................................8

3.2 Network Protocols .......................................................................................8

3.3 DHCP .........................................................................................................8

3.4 DNS .........................................................................................................9

3.5 IP Address ....................................................................................................9

3.5.1 Default IP Address ..........................................................................9

3.5.2 Changing TCP/IP Properties on Your Computer........................10

Part 4: Operations

4.0 Testing the Connection ..............................................................................11

4.1 iConnect Software......................................................................................12

4.2 Setting a new IP Address over the Network ...........................................14

4.3 Receiver’s Configurations and Operations ............................................15

4.3.1 Power Up Device ..........................................................................16

4.3.2 Get Readings from the Connector/Transmitter .........................17

4.3.3 Java Runtime Environment Setup .............................................19

4.3.3.1 Java Runtime Environment 1.7 Setup Instructions...................19

4.3.3.2 Browser Proxy Selection .............................................................20

4.3.4 Chart ..............................................................................................21

4.3.5 Diagnostic .....................................................................................23

4.3.6 Configuration ................................................................................24

4.3.7 Sensor Setup.................................................................................25

4.3.8 Access Control ............................................................................28

4.4 Telnet Setup ...............................................................................................29

4.5 HTTPget Program.......................................................................................29

4.5.1 HTTPget using Port 2000 ............................................................30

4.5.2 HTTPget and ARP to Setup Device IP Address .........................31

4.6 ARP Protocol ..............................................................................................31

4.7 iLog Software..............................................................................................33

4.8 Mail Notifier Software.................................................................................35

4.8.1 Installation.....................................................................................35

4.8.2 Program Options Setup and Configuration ..............................36

4.8.3 Device Setting Setup and Configuration ....................................37

4.8.4 Sending Text Messages to a Cell Phone ....................................38

Part 5: Environment / Operating Conditions...................................................................... 39

5.1 General Deployment Guidelines .............................................................. 39

5.2 With Line-of-Sight ......................................................................................41

5.3 Without Line-of-Sight ................................................................................42

5.4 Casing and Closure Around the Antenna ................................................42

Part 6: Specifications .......................................................................................................... 43

Part 7: Factory Preset Values ..............................................................................................46

Appendix A Glossary ......................................................................................................47

Appendix B IP Address ..................................................................................................48

Appendix C IP Netmask ..................................................................................................49

Appendix D ASCII Chart ................................................................................................50

ASCII Chart Control Codes .......................................................................51

Appendix E iLog Error Messages..................................................................................52

Appendix F ASCII/Telnet Commands Table..................................................................53

Appendix G Frequently Asked Questions (FAQ) ..........................................................55

Appendix H Warnings and Regulatory Information .....................................................57

LIST OF FIGURES:

Figure 1.1 Temperature Wireless System on the Ethernet Network..........................3

Figure 2.1 Parts of the Receiver ...................................................................................4

Figure 2.2 Mounting the Receiver ...............................................................................5

Figure 2.3 8 Position DIP Switch Setup .......................................................................6

Figure 2.4 Ethernet - 4 Position DIP Switch Setup .....................................................6

Figure 2.5 RJ45 Pinout ..................................................................................................7

Figure 2.6 10Base-T Crossover Cable Wiring .............................................................7

Figure 3.1 4 Position DIP Switch on Bottom Side of Receiver ..................................8

Figure 3.2 Network Connections ...............................................................................10

Figure 3.3 Network Connections ...............................................................................10

Figure 4.1 Pinging the Receiver from MS-DOS Prompt ...........................................11

Figure 4.2 Assigning an IP Address using iConnect ...............................................12

Figure 4.3 Accessing the Wireless System for Configuration ................................13

Figure 4.4 Access Control .........................................................................................14

Figure 4.5 Wireless System Home Page Menu ........................................................15

Figure 4.6 Login and Administrator Password .........................................................15

Figure 4.7 Select Readings by Group .......................................................................17

Figure 4.8 Readings .....................................................................................................17

Figure 4.9 Comma Separated Value Format ..............................................................18

Figure 4.10 Java 1.7 Screen Shot .................................................................................19

Figure 4.11 Select Chart by Group ...............................................................................21

Figure 4.12 Chart ........................................................................................................21

Figure 4.13 Diagnostic ...................................................................................................23

Figure 4.14 Configuration ............................................................................................24

Figure 4.15 Sensor Setup by Group .............................................................................25

Figure 4.16 Sensor Setup ..............................................................................................26

Figure 4.17 Sensor Parameters ....................................................................................27

Figure 4.18 Access Control ..........................................................................................28

Figure 4.19 HTTPget Example of Polling Connector/Transmitter #6,7,8,9,10...........30

Figure 4.20 ARP Commands and Responses .............................................................32

Figure 4.21 iLog Software Logging Data for Connector/Transmitter #6,7,8 .............33

Figure 4.22 Wireless System Mail Notifier Main Window ...........................................35

Figure 4.23 Wireless System Mail Notifier Profile Setup ............................................36

Figure 4.24 Wireless System Mail Notifier Device Setting ........................................38

Figure 5.1 Operation in Buildings ..............................................................................40

Figure 5.2 Fresnel Zone ..............................................................................................41

Figure 5.3 Materials in Buildings ...............................................................................42

Figure 6.1 Dimensions of the Receiver ....................................................................45

Table 4.1 iLog Excel Applications .............................................................................34

Table 4.2 Mail Notifier Commands ............................................................................37

iii

NOTES, WARNINGS and CAUTIONS

Information that is especially important to note is identified by the following labels:

• NOTE

• WARNING or CAUTION

• IMPORTANT

• TIP

NOTE: Provides you with information that is important to successfully

setup and use the Wireless System.

CAUTION or WARNING: Tells you about the risk of electrical shock.

CAUTION, WARNING or IMPORTANT: Tells you of circumstances or

practices that can affect the instrument’s functionality and must refer

to accompanying documents.

TIP: Provides you helpful hints.

FEATURES

⻬Temperature

⻬Humidity

⻬Email Alarms

⻬Web Server

⻬No Special Software

Required

PART 1

INTRODUCTION

1.1 Safety and EMC Considerations

Refer to the Environment/Operating Conditions Section

EMC Considerations

•Whenever EMC is an issue, always use shielded cables.

•Never run signal and power wires in the same conduit.

•Use twisted-pair wires for signal connections.

•Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.

Failure to follow all instructions and warnings may result in injury!

1.2 Before You Begin

Inspecting Your Shipment: Remove the packing slip and verify that you have received

everything listed. Inspect the container and equipment for signs of damage as soon as

you receive the shipment. Note any evidence of rough handling in transit. Immediately

report any damage to the shipping agent. The carrier will not honor damage claims

unless all shipping material is saved for inspection. After examining and removing the

contents, save the packing material and carton in the event reshipment is necessary.

Customer Service: If you need assistance, please contact the Customer Service

Department nearest you.

Manuals, Software: The latest Operation Manual as well as free configuration software

(iConnect), data-logging software (iLog) and Mail Notifier are available at the website

listed on the cover pages of this manual, or on the CD-ROM enclosed with your shipment.

1.3 Description

The UWTC-REC3 Wireless Receiver provides Web-based monitoring of Temperature and

Humidity. Each Receiver can directly support up to thirty-two (32) Thermocouples, RTD,

Infrared and Humidity wireless Connectors / Transmitters.

The Receiver allows you to monitor and record Temperature and Relative Humidity over an

Ethernet network or the Internet without any special software-just your Web Browser. The

Receiver includes AC adapters to operate on any voltage worldwide from 100 to 240 Vac

and 50 to 60Hz. The Receiver connects directly to an Ethernet Network or the Internet.

Unlike an RS232 or USB device, it does not require a host computer.

The Receiver also provides error detection mechanism for inactive communication and

diagnostic information including signal strength and data transmission success rate to

help trouble shooting potential wireless system installation issues.

The Receiver is an independent node on the network sending and receiving data in

standard TCP/IP packets. It is easily configured from a Web Browser and can be password

protected. From within an Ethernet LAN or over the Internet, the user simply types the IP

address (such as 192.168.1.200) or an easy to remember name (such as "ServRoom" or

"Chicago5") and the Receiver serves a Web Page with the current readings.

The device can trigger an alarm if variables go above or below a set point that you

determine. Your alarm can be sent by email to a single user or to a group distribution list,

including text messages to Internet enabled cell phones and PDA’s. The "Mail Notifier"

software is free and easy to use program for this application.

1.3 Description (continued)

The Receiver is easy to install, simple to operate, and features award-winning iServer

technology with an Embedded Web Server that requires no special software.

The Receiver serves Active Web Pages to display real time readings and charts of

Temperature and Humidity. You can also log data in standard data formats for use in a

spreadsheet or data acquisition program such as Excel or Visual Basic. iLog is a free and

easy to use program for logging data to Excel.

The virtual chart viewed on the web page is a Java™ Applet that records a chart over the

LAN or Internet in real time. With the Receiver there is no need to invest time and money

learning a proprietary software program to log or chart the data.

Chart scales are fully adjustable on the fly. For example, the chart can display one minute,

one hour, one day, one week, one month or one year. Temperature and humidity can be

charted across the full span (-40 to 125°C, and 0 to 100% RH) or within any narrow range

such as (20 to 30°C).

The OPC Server software makes it easy to integrate the Receiver with many popular Data

Acquisition and Automation programs offered by Omega, Wonderware, iConics, Intellution,

Rockwell Automation, and National Instruments, among others.

The following example illustrates how you can hookup wireless system to your network:

Figure 1.1 Wireless System on the Ethernet Network

The wireless system consists of a single Receiver and one or more Connector /

Transmitters. Transmitter will send data periodically to the Receiver where it serves as a

gateway between the users and the Transmitter. The users can access the data through

the Receiver’s web server and provided data acquisition software.

A standard web browser can be used to monitor and chart temperature and humidity. The

browser can also be used to configure the device’s IP address, passwords for access and

overall configuration parameters.

UWTC-NB9

UWRTD UWTC RECEIVER

CONNECTOR /

TRANSMITTERS

COMPUTER

(Datalogging

Software)

COMPUTER

(Standard

Web Browser)

SERVER

ETHERNET

UWRH

UWIR

PART 2 HARDWARE

2.1 Parts of the Receiver

Figure 2.1 Parts of the Receiver

1Wall mounting bracket clip holes (3 places)

2Label with model and serial numbers

3Receiver’s firmware revision on label

48 position DIP switch, only the 1st position is used (see Section 4.3.1 for details)

5Ethernet: RJ45 interface for 10BASE-T connection.

6Case’s tray, where the PCB is mounted

74 position DIP switch, sets the DHCP and Factory Defaults

8Receiver’s radio module firmware revision on label

9Label with default IP address, remove and then write your IP address, in the space

provided

10 Label with MAC address (in hex code)

11 Wall mounting bracket

12 Case’s cover mounting screw (2 places)

13 Power LED: (Green) Solid: Indicates Power-ON

14 Power supply: Plus (+) power supply wire connection inside the plug;

Minus (-) power supply wire connection outside the plug

15 Reset button: Used for power reseting the Ethernet board

16 Case’s cover

Inhaltsverzeichnis

Andere Omega Engineering Empfänger Handbücher

Omega Engineering

Omega Engineering ISA RS-422 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Dish Network

Dish Network Satellite Television Bedienungsanleitung