Omega UWPC-2-NEMA Bedienungsanleitung

UWPC-2-NEMA

Wireless Process

Voltage/Current Transmitter

MADE IN

e-mail: [email protected]

For latest product manuals:

omegamanual.info

Shop online at

omega.com®

User’s Guide

Servicing North America:

U.S.A.: Omega ngineering, Inc., One Omega Drive, P.O. Box 4047

ISO 9001 Cert f ed Stamford, CT 06907-0047 USA

Toll Free: 1-800-826-6342 T L: (203) 359-1660

FAX: (203) 359-7700 e-mail: [email protected]

Canada: 976 Bergar

Laval (Quebec), H7L 5A1, Canada

Toll-Free: 1-800-826-6342 T L: (514) 856-6928

FAX: (514) 856-6886 e-mail: [email protected]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OM GA®

Customer Service: 1-800-622-2378/1-800-622-B ST®

ngineering Service: 1-800-872-9436/1-800-USA-WH N®

Mexico/ T L: 001 (203) 359-1660 FAX: 001 (203) 359-7700

Latin America: e-mail: [email protected]

Servicing Asia:

China:: 1698 Yi Shan Road, Unit 102

Min Hang District

Shanghai, China 201103 P.R.C.

Hotline: 800 819 0559/400 619 0559

e-mail: [email protected]

Servicing Europe:

Benelux: Toll-Free: 0800 099 3344 T L: +31 20 347 21 21

FAX: +31 20 643 46 43 e-mail: [email protected]

Czech Republic: Frystatska 184

733 01 Karviná, Czech Republic

T L: +420-59-6311899 FAX: +420-59-6311114

e-mail: [email protected]

France: Toll-Free: 0805 541 038 T L: 01 57 32 48 17

FAX: 01 57 32 48 18 e-mail: [email protected]

Germany/ Austria: Daimlerstrasse 26

D-75392 Deckenpfronn, Germany

Toll-Free: 0800 8266342 T L: +49 (0) 7056 9398-0

FAX: +49 (0) 7056 9398-29 e-mail: [email protected]

United Kingdom: OM GA ngineering Ltd.

ISO 9001 Cert f ed One Omega Drive, River Bend Technology Centre, Northbank

Irlam, Manchester M44 5BD United Kingdom

Toll-Free: 0800-488-488 T L: +44 (0) 161 777-6611

FAX: +44 (0) 161 777-6622 e-mail: [email protected]

MEGAnet®nline Service Internet e-mail

omega.com info@omega.com

It is t e policy of OMEGA Engineering, Inc. to comply wit all worldwide safety and EMC/EMI

regulations t at apply. OMEGA is constantly pursuing certification of its products to t e European New

Approac Directives. OMEGA will add t e CE mark to every appropriate device upon certification.

T e information contained in t is document is believed to be correct, but OMEGA accepts no liability for any

errors it contains, and reserves t e rig t to alter specifications wit out notice.

WARNING: T ese products are not designed for use in, and s ould not be used for, uman applications.

Table of Contents

Section ............................................................................................................ Page

Section 1 Introduction ........................................................................................... 1-1

1.1 Precautions ................................................................................................. 1-1

1.2 Statement on FCC and C ....................................................................... 1-2

1.3 General Description and System Components ..................................... 1-2

Section 2 Hardware ............................................................................................... 2-1

2.1 Unpacking and Inspection ....................................................................... 2-1

2.2 Included Items ........................................................................................... 2-1

Section 3 peration ............................................................................................... 3-1

3.1 Main Transmitter Board ........................................................................... 3-1

Section 4 Software ................................................................................................. 4-1

4.1 Getting Started ........................................................................................... 4-1

4.2 Software Installation ................................................................................. 4-1

Section 5 End Device peration ......................................................................... 5-1

5.1 Setup and Configuration .......................................................................... 5-1

5.2 Mounting Installation ............................................................................... 5-7

5.3 Battery Replacement ................................................................................. 5-9

5.4 Input Connections ................................................................................... 5-11

Section 6 System peration ................................................................................. 6-1

6.1 Introduction ............................................................................................... 6-1

6.2 RF Communication Basics ....................................................................... 6-1

6.3 Basic System Overview ............................................................................ 6-1

6.4 nvironment/ Operating Conditions .................................................... 6-2

6.5 Transmit Rate vs. Battery Life ................................................................. 6-3

Section 7 Service and Calibration ....................................................................... 7-1

7.1 Service and Calibration ............................................................................ 7-1

Section 8 Specifications ......................................................................................... 8-1

Section 9 Approvals, Regulatory Compliance .................................................. 9-1

UWPC-2-NEMA

Wireless Process Voltage/Current Transmitter

List of Figures

Section Figure Description ............................................................... Page

Section 3.1 3-1 Main Transmitter Board ........................................... 3-1

Section 4.2.2 4-1 Software - Welcome Screen ...................................... 4-1

Section 4.2.2 4-2 Software - Select Installation Screen ....................... 4-2

Section 4.2.2 4-3 Software - Confirm Installation Screen .................. 4-2

Section 4.2.2 4-4 Software – License Agreement Screen ................... 4-3

Section 4.2.2 4-5 Software – Installation Complete Screen ............... 4-3

Section 5.1 5-1 USB Cable ................................................................... 5-1

Section 5.1.4 5-2 Main Transmitter Board ........................................... 5-3

Section 5.1.4 5-3 Launch Setup Utility ................................................. 5-3

Section 5.1.4 5-4 Utility Program - Welcome ...................................... 5-4

Section 5.1.4 5-5 Utility Program – Connect To Transmitter ............ 5-4

Section 5.1.4 5-6 Utility Program – Setup Transmitter ...................... 5-5

Section 5.1.4 5-7 Utility Program – stablish Link ............................ 5-5

Section 5.1.4 5-8 Utility Program – Choose Options ......................... 5-6

Section 5.1.4 5-9 Utility Program – Send Setting To Transmitter ..... 5-6

Section 5.2.1 5-10 Mounting .................................................................... 5-7

Section 5.2.1 5-11 Fresnel Zone ............................................................... 5-7

Section 5.3 5-12 Battery Replacement ................................................. 5-9

Section 5.3.2 5-13 Fresnel Zone ............................................................. 5-10

Section 5.4 5-14 Input Connection Diagrams .................................. 5-11

Section 6.3 6-1 nd Device/Receiver ............................................... 6-1

UWPC-2-NEMA

Wireless Process Voltage/Current Transmitter

Section 1 - Introduction

Please read this manual completely before installing and operating your wireless

end device and receiver system. It’s important read and follow all notes,

cautions, warnings and safety precautions before operating this device. “Device”

refers to your transmitter or receiver unit.

1.1 Precautions

• This device is not designed for use in any medical or nuclear applications.

• Do not operate this device in flammable or explosive environments.

• Never operate with a power source other than the one recommended in this

manual.

• This device has been designed for dry, moisture free indoor applications only.

• Do not operate this device outside of the recommended use outlined in this

manual.

• No co-location with other radio transmitters is allowed. By definition, co-

location is when another radio device or it’s antenna is located within 20 cm

of your connector/transmitter and can transmit simultaneously with your

UWPC unit.

• Never install wireless transmitters within 20 cm or less from each other.

• Never install and/or operate your UWPC transmitter closer than 20 cm to

nearby persons.

• Never use your UWPC transmitter as a portable device. Your unit has been

designed to be operated in a permanent installation only.

There are no user serv ceable parts ns de your dev ce.

Attempt ng to repa r or serv ce your un t may vo d your

warranty.

1-1

Introduction 1

NOTE:

1.2 Statement on FCC and CE Marking

1.2.1 FCC Marking

FCC ID: OUR-XB PRO IC #4214A-XB PRO

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: 1.) This device may not cause harmful interference.

2.) This device must accept any interference received, including interference that

may cause undesired operation.

1.2.2 CE Marking

It is the policy of OM GA to comply with all worldwide safety and MI/ MC

regulations that apply. OM GA is constantly pursuing certification of its

products to the uropean New Approach Directives. OM GA will add the C

mark to every appropriate device upon certification.

1.3 General Description & System Components

1.3.1 General Description

Model UWPC-2-N MA Wireless Process transmitter features a stand-alone,

compact, battery powered N MA design that transmits measurements back to a

host receiver up to 90 m (300') away. When activated the wireless transmitter will

transmit readings continuously at pre set time interval that was programmed by

the user during the initial setup. ach unit measures and transmits: Process

Voltage or Current Readings, RF Signal Strength and Battery Condition to the

receiver and is displayed on your PC screen in real time using the provided

software.

Introduction

1-2

Section 2 Hardware

It is important that you read this manual completely and follow all safety

precautions before operating this instrument.

2.1 Package Inspection

Remove the packing list and verify that you have received all your equipment. If

you have any questions about the shipment, please call our Customer Service

Department at

1-800-622-2378 or 203-359-1660. We can also be reached on the Internet at

omega.com

e-mail: cservice@omega.com

When you receive the shipment, inspect the container and equipment for any

signs of damage. Note any evidence of rough handling in transit. Immediately

report any damage to the shipping agent.

The carr er w ll not honor any damage cla ms unless all

sh pp ng mater al s saved for nspect on. After exam n ng

and remov ng contents, save pack ng mater al and carton n

the event resh pment s necessary.

2.2 Included Items

The following items are supplied in the box.

• 1 UWPC-2-N MA transmitter

• 1 User’s Guide

• Measurement/Data Logging Software

• 3.6V Lithium Battery

• USB Cable

2-1

Hardware 2

NOTE:

Section 3 - Operation

3.1 Main Transmitter Board

Figure 3-1. Main Transmitter Board

3-1

Operation

ON/OFF SETUP USB

STATUS

LOW BATTERY

Section 4 Software

4.1 Getting Started

The following program files are included on the TC-Central User Software CD

supplied with your Receiver. These files can also be downloaded from the

omega.com website should you misplace your CD.

• nd Device Setup Utility Software

• Receiver/Transceiver Setup Utility Software

• TC-Central Measurement and Data Logging Software

4.2 Software Installation

4.2.1 System Requirements

Your PC should meet the following minimum requirements:

• Pentium Class processor

• Hard Drive Space: 210 meg

• Ram: 256 meg or higher

• 1 Available USB Port

• 1 CD-ROM Drive

• Windows 2000, XB, or Vista (32 bit) Operating System

4.2.2 Software Installation

Insert the TC-Central User CD that was included with your receiver unit into the

CD-ROM drive on your PC. Your system should begin the installation process

automatically.

Figure 4-1. Software - Welcome Screen

4-1

Software 4

This welcome screen should be visible on your computer screen. To continue

with installing the program, click the “Next >” button.

Figure 4-2. Software - Select Installation Screen

From this screen you select the folder were you want the program files installed

on your PC. The default setting will install the software under your “Program”

folders in a new folder named “Omega” To continue with installing the program

click the “Next >” button.

Figure 4-3. Software - Confirm Installation Screen

The setup wizard now has all the information to complete the installation of the

software on your PC. To continue with installing the program click the “Next >”

button.

Software

4-2

Inhaltsverzeichnis

Andere Omega Sender Handbücher

Omega

Omega TX94A Bedienungsanleitung

Omega

Omega CDTX-90 Series Bedienungsanleitung

Omega

Omega OS4000 Series Bedienungsanleitung

Omega

Omega DRST-CM Bedienungsanleitung

Omega

Omega HX93B Series Bedienungsanleitung

Omega

Omega FMA1001A series Bedienungsanleitung

Omega

Omega UWTC Series Bedienungsanleitung

Omega

Omega DRST-AC Bedienungsanleitung

Omega

Omega LVU500 Series Bedienungsanleitung

Omega

Omega XW-ED Bedienungsanleitung

Omega

Omega TX787 Bedienungsanleitung

Omega

Omega OS101 Bedienungsanleitung

Omega

Omega MT12TX Series Bedienungsanleitung

Omega

Omega LVU800 Series Bedienungsanleitung

Omega

Omega FP90 Series Bedienungsanleitung

Omega

Omega FMG-1000-MAW Bedienungsanleitung

Omega

Omega OS101 Bedienungsanleitung

Omega

Omega DRST-UN Bedienungsanleitung

Omega

Omega OS102E Bedienungsanleitung

Omega

Omega TX93 Bedienungsanleitung

Omega

Omega DMD4059 Bedienungsanleitung

Omega

Omega ZW Series Bedienungsanleitung

Omega

Omega LVU800 Series Bedienungsanleitung

Omega

Omega OM-CP-RF Series Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung

Excalibur

Excalibur SoundMaster FM Transmitter 144 Bedienungsanleitung