Omnimount SC120FM Bedienungsanleitung

Max screen size: 42" - 80" (107-203 cm)

Max weight 120 lbs (54.4 kg)

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

777-61-062-G-02 rev F

SC120FM

Large Full Motion TV Wall Mount

BEFORE YOU BEGIN

Make sure you have power and signal outlets in the right spot. Now is a great time to check the length of your

cables and make sure they will reach the appropriate outlets. Nothing’s worse than completing a perfect

installation just to realize there’s nowhere to plug in the TV!

Avoid TV glare. Find a mounting location for your TV where there is no glare from surrounding windows or lights.

A great way to check for glare is to have a friend hold a mirror where you intend to hang your TV. Take a seat; if you

can see windows or bright lights in the reection that’ll cause glare on your TV once installed.

After nding a location that works best for you, grab your tools and you’re ready to begin!

Remember, if you’re ever in doubt during this process, watch the installation video online or call our friendly

customer care team at 1.800.MOUNT-IT (800-668-6848).

777-61-062-G-02 rev F

TOOLS NEEDED

WOOD

CONCRETE

Ø 7/32" (5,5 mm)

10mm

Ø 3/8" (9,5-10 mm)

1/2"

CONTENTS

This product is designed to move easily

when mounted to the wall and the weight

of your TV is attached. Movements may be

dicult before your TV is attached.

1x 1x

Part # Description

A Wall Plate

B TV Plate

C VESA Extenders

D Cable Tie

E Wall Template

F Stud Finder/Level

777-61-062-G-02 rev F

CONTENTS

TV Hardware

MOUNT Hardware

ST8 x 65mm M8

4x4x

M4 x 7mm

2x 2x

M4/M5

M6 x 15mm

EXTENDER Hardware

8x8x 8x

M6/M8 x 5mm

M6/M8

M6 x30mm

4x M8 x30mm

M6/M8 x 10mm

M6 x15mm

M8 x15mm

M8 x45mm

QUESTIONS? 1-800-MOUNT-IT (1-800-668-6848)

Disclaimer – OmniMount Systems has extended every eort to ensure to accuracy and completeness of

this manual. However, OmniMount Systems, Inc. does not claim that the information covers all

installation or operational variables. The information contained in this document is subject to change

without notice or obligation of any kind. Regarding the information contained herein, OmniMount Systems,

Inc. makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy,

suciency, or completeness of the information contained in this document.

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN

RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF FACTORY WARRANTY!

It is the responsibility of the installer to ensure all components are properly assembled and installed using the instructions provided. If you do not understand

these instructions or have any questions or concerns, please contact customer service at 1-800-668-6848 or [email protected]. Do not attempt to install

or assemble this product if the product or hardware is damaged or missing. In the event that replacement parts or hardware are needed, please contact

Customer Service at 1-800-668-6848 or [email protected]. International customers needing assistance should contact the Dealer from which they

purchased the product. The included hardware is designed for use on vertical walls constructed of wood studs or solid concrete. A wood stud wall is

dened as consisting of a minimum of 2x4 wooden studs (2" wide by 4" deep) with a maximum of 5/8" drywall. A concrete wall is dened as solid concrete

with a minimum depth of 6" (152 mm). The included hardware is not designed for use with metal studs or cinderblock walls. If you’re uncertain about the

construction of your wall, then please consult a qualied contractor or installer for assistance. For a safe installation, the wall you are mounting to must

support 4 times the weight of the total load. If not, then the surface must be reinforced to meet this standard. The installer is responsible for verifying that

the wall structure and hardware used in any installation method will safely support the total load.

777-61-062-G-02 rev F

WEIGHT / SCREEN SIZE CAPACITY

120 lbs

54.4 kg

USE WITH TVs LARGER THAN THE MAXIMUM WEIGHT AND/OR SCREEN SIZE MAY RESULT IN

INSTABILITY CAUSING POSSIBLE INJURY.

42"- 80"

1. ATTACHING THE TV PLATE TO THE TV

Using a Phillips screw driver attach the TV plate to the TV. Because this mount was designed to t a number of TV congurations,

we’ve included a variety of screws and spacers. You will only be using 4 screws in this installation step. Spacers may be needed to

accommodate TVs with a curved back, recessed mounting locations, or in the event that one of the TV rail obstructs the power or

signal plug outlets. Spacers may also be mounted behind the TV rail to take up additional slack. Now is also an opportune time to

plug in all of your power and signal cables into the TV.

TV Hardware

M6/M8 x 5mm

M6/M8

M6 x30mm

4x M6/M8 x 10mm

M6 x15mm

M8 x30mm

M8 x15mm

4x M8 x45mm

777-61-062-G-02 rev F

NOTE: If the TV plate does not reach the mounting holes on the back of your TV, you will need to install the extenders.

Please see the next page for the extender installation.

ATTENTION: If your AV access is obstructed the

at panel plate is designed for vertical adjustment

with 100mm x 100mm hole patterns.

EXTENDER INSTALLATION

These extenders will allow you to mount TV’s with up to a 600mm x 400mm

hole pattern. Attach each extender to the TV plate using shown hardware.

Once this step is complete, refer to the previous step for attaching the TV

plate to the TV.

M6 x 15mm

EXTENDER Hardware

8x 8x

Inhaltsverzeichnis

Andere Omnimount Rack & Stand Handbücher

Omnimount

Omnimount PFC-A Bedienungsanleitung

Omnimount

Omnimount VB35C Bedienungsanleitung

Omnimount

Omnimount OMNI 25.0C Bedienungsanleitung

Omnimount

Omnimount OM1100595 Bedienungsanleitung

Omnimount

Omnimount OM1100594 Bedienungsanleitung

Omnimount

Omnimount WS-2 Bedienungsanleitung

Omnimount

Omnimount OE80T Bedienungsanleitung

Omnimount

Omnimount OC40F Bedienungsanleitung

Omnimount

Omnimount OM10245 Bedienungsanleitung

Omnimount

Omnimount OM10351 Bedienungsanleitung

Omnimount

Omnimount CI40FML Bedienungsanleitung

Omnimount

Omnimount OC80F Bedienungsanleitung

Omnimount

Omnimount OS50T Bedienungsanleitung

Omnimount

Omnimount 30.0 WB Bedienungsanleitung

Omnimount

Omnimount SCM50 Bedienungsanleitung

Omnimount

Omnimount OM10046 Bedienungsanleitung

Omnimount

Omnimount 4N1-S Bedienungsanleitung

Omnimount

Omnimount OS80T Bedienungsanleitung

Omnimount

Omnimount 5.0 W/C Bedienungsanleitung

Omnimount

Omnimount OM1004283 Bedienungsanleitung

Omnimount

Omnimount VB60C Bedienungsanleitung

Omnimount

Omnimount RSF Bedienungsanleitung

Omnimount

Omnimount VB150F Bedienungsanleitung

Omnimount

Omnimount CPLP4 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung